Journal of Polymer & Composites
Chemical Engineering ISSN 2321-2810 6 issues a year Hybrid open access
Submit a manuscript Search this journal Editorial board (20)
About the journal
Journal of Polymer & Composites is a peer-reviewed Hybrid Open Access journal launched in 2013, serving the fields of reinforced plastics and polymer composites, including research, production, processing, and applications.
Journal metrics
Counted from this archive, not supplied by anyone.
- 1,475Articles published
- 485Published in 2026
- 5,369Authors
- 487Open access
Journal information
- Title
- Journal of Polymer & Composites
- Issues per year
- 6 issues
- ISSN
- 2321-2810
- Publisher
- STM Journals
- Starting year
- 2022
- Subject
- Chemical Engineering
- Publication format
- Hybrid open access
- Language
- English
- Type
- Peer-reviewed journal (refereed)
Indexed in
Editorial board
-
Editor-in-Chief
Dr. Susarla Venkata Ananta Rama Sastry
Chemical Engineering, Harcourt Butler Technical University, India
-
Associate Editor-in-Chief
Prof. Mohd Faizul Mohd Sabri
Department of Mechanical Engineering, Universiti Malaya, Malaysia
-
Associate Editor-in-Chief
Dr. Sivasubramanian Palanisamy
Department of Mechanical Engineering, Mohan Babu University, India
Latest articles
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Structural, Optical, Surface and Gas-Sensing Properties of rGO/Sn1-xZnxO₂ Nanocomposites
Abstract: rGO/Sn₁₋ₓZnₓO₂ nanocomposites with x = 0.00–0.75 were synthesized by sol–gel auto-combustion followed by wet impregnation with reduced graphene oxide. The adopted synthesis route enabled homogeneous Zn incorporation into the SnO₂ matrix and uniform distribution of rGO, leading to improved structural integrity and interfacial contact between the two components. XRD confirmed a dominant tetragonal cassiterite SnO₂ structure, while FTIR, FESEM, EDS, UV–visible, and BET analyses verified oxide–rGO coupling, Zn-dependent structural modification, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Chitosan polymer and composites Hydrogels: An Emerging Approach for Microplastic Elimination from Water
Abstract: Hydrogel is a polymer network which can retain huge volumes of water but still retains its shape because of its special chemical formula. Recently, hydrogels have become an object of great interest for environmental remediation due to the possibility of controlling their physicochemical properties in the case of removal of microplastics. The current work reviews and analyzes the efficiency of application of conventional coagulation systems based on chitosan and new …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Self-Healing Structural Polymer Composites Incorporating Bio-Inspired Nanofillers
Abstract: Self-healing polymer composites become an attractive family of intelligent materials that are capable of autonomously repairing damage, which will enhance their durability, reliability and service life in extreme engineering applications. The materials are based on the principles of nature, using the nanofillers that are derived from biological systems to improve mechanical properties and self-healing capabilities by utilizing hierarchical structures and multifunctional interface interactions. The recent developments on the formulation of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
SYNTHESIS, CHARACTERIZATION AND BIOMEDICAL APPLICATIONS OF A SILVER NANOPARTICLE-COATED CHITOSAN–FUCOIDAN POLYMER NANOCOMPOSITE LOADED WITH PERSEA AMERICANA LEAF EXTRACT
Abstract: Consuming a natural composite of Persea americana (Avocado) leaf extract and a chitosan and fucoidan form a biodegradable biopolymer matrix–polymer nanocomposite with biomedical applications, this study explored a potential therapeutic method. GC-MS and UV spectroscopy were used to describe the aqueous leaf extract, which was verified by phytochemical screening to contain flavonoids, tannins, phenols, terpenoids, and alkaloids. The chitosan–fucoidan biodegradable polymer matrix served as a biocompatible stabilizing and encapsulating carrier …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
Ahead of print
Accepted and online before they are assigned to an issue.
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe 3 O 4 @ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe 3 O 4 @ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe 3 O 4 ) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored …
Published in Journal of Polymer & Composites Read article
-
Plant Growth Promotion: Role of Nanoparticles and Soil Microorganisms
Abstract: Crops intended to support rapidly expanding populations often face numerous harsh environmental conditions. DCrops intended to support rapidly expanding populations often face numerous harsh environmental conditions. Despite the natural evolution of plants in response to espite the natural evolution of plants in response to changing environments and ongoing efforts to engineer resistant varieties using the latest research advancements, food scarcity remains a challenge. Cultivating rhizosphere microorganisms presents an alternative strategy …
Published in Journal of Polymer & Composites Read article
-
Electro-chemical treatment of graphite oxide: preparation and Characterization of high quality Graphene material
Abstract: With the enlargement of flexibility and suitability in material industries, high-performance thermal management materials are demanded with high thermal conductivity and electrical insulation are growing. In recent years, graphene has received a numerous focus from science community due to its high thermal conductivity and electrical insulation. Fabrication of light weight graphene and its derivatives as graphene Oxide (GO) and reduced graphene oxide (rGO) via facile processing method is yet a …
Published in Journal of Polymer & Composites Read article
-
Investigation on bi-layer knitted fabric produced using recycled polyester and banana fiber for improved moisture and thermal comfort properties
Abstract: This research investigates thermal comfort characteristics of bi-layer knitted fabrics made of banana fibers and recycled polyester (rPET). The main aim is to maximize thermal comfort of textile products by taking advantage of the distinctive characteristics of these two varieties of eco-friendly materials. Recycled polyester and banana fibers were combined to make the bi-layer knitted materials, which is produced as separate inner and outer layers to maximize performance. The features …
Published in Journal of Polymer & Composites Read article
-
Vibration Analysis of Woven Hybrid Carbon-Kevlar Composite Laminates
Abstract: Composite materials have revolutionized the field of engineering and design, providing the ability to combine two or more materials with different properties to create new materials with enhanced characteristics. The intricate process of weaving together carbon fiber and Kevlar fiber to create a 3D composite fabric is not only fascinating but also results in a beautiful, intricate pattern. Hand weaving is an art that requires precision and skill, and when …
Published in Journal of Polymer & Composites Read article
-
Polymeric Actions to Make Recycled Aggregate of Concrete Improved
Abstract: Recycling construction materials of concrete, steel, and steel scraps is an essential technique to promote sustainable material flow. The restricted reuse of recycled concrete aggregate (RCA) can be justified, even in part, by the impact on strength and durability of new RCA-based concrete, instead of natural aggregates. Various research has been conducted on improving RCA effectiveness, in particular resistance and water absorption to disintegration. Application of polymer-dependent therapy was used …
Published in Journal of Polymer & Composites Read article
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Lead Time Reduction in Pipe Manufacturing: An Application of Value Stream Maps and 5S
Abstract: The pipe manufacturing industry has a considerable effect on the economic growth of a country. In this competitive scenario, manufacturing industries receive immense pressure for providing high-quality products at affordable cost, and on-time delivery. This paper aims to reduce lead times in a small-scale pipe industry plant by the application of the Value Stream Mapping (VSM) technique. The products of the plant are Resin Polyvinyl Chloride (RPVC) pipes, RPVC suction …
Published in Journal of Polymer & Composites Read article
-
Thermal-hydraulic Behaviour of Corrugated Pipe Configurations
Abstract: Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power plants, and solar energy generation. It is required to do thermal optimization on heat exchangers in order to decrease the size, cost, and energy requirements of the heat exchangers while simultaneously improving their capacity to transmit heat. In these types of businesses, heat exchangers frequently make use …
Published in Journal of Polymer & Composites Read article
-
Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron
Abstract: In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the selective amount of silicon, molybdenum, copper and chromium. For fracture toughness characterization, the specimens are prepared from the samples in "as-cast" conditions. The value of static fracture toughness obtained from the experiments for the specimen of Heat-2 with a fatigue pre-crack is 54.49 MPa√ , whereas, for …
Published in Journal of Polymer & Composites Read article
-
Techno-economic Assessment of a Domestic Refrigerator with Aluminium-based Suction Line and Capillary Tube
Abstract: The present work reports the experimental performance evaluation of aluminum suction line-based domestic refrigerators. Furthermore, it compared domestic refrigerators with conventional copper capillary tubes and suction lines using R600a as a refrigerant. Performance parameters: energy consumption, ice-making time, and pull-down time was reduced significantly compared to conventional copper suction and capillary tube. Refrigerants having Ambient temperature for ice making test and pull down were initially set at 43°C and that …
Published in Journal of Polymer & Composites Read article
-
Hybrid Supercapacitor Application for Future E-mobility
Abstract: With the rise in demand for automobiles, there is an increase in pollution levels and global warming since the past decade, there is a strong need for an alternative mode of commuting like Electric vehicles against conventional gasoline/diesel-powered vehicles to safeguard the planet and its flora and fauna. Battery technology like lithium-ion and others has already revolutionized the automotive world, but there is a limitation of fast charging, operating temperature …
Published in Journal of Polymer & Composites Read article
-
Mechanical Performance Degradation of Naturally Aged Nitrile Butadiene Rubber in Low Frequency Range...
Abstract: For good mechanical design, damping is often still an invisible requirement. Nitrile Butadiene Rubber (NBR) has a wide range of applications as a damping and sealing material. To offer the long-term service of NBR, it is important to estimate the degradation of modal properties under complex mechanical and environmental loading. The present work aims to correlate the experimental data with generalized higher-order Maxwell models and curve fitting techniques to find …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis of Cutting Forces Under Different Machining Parameters and Carbide Inserts During Turning of Hardened AISI 4340 Steel
Abstract: Turning of hardened materials with an advanced coated carbide insert has numerous advantages over the grinding process, e.g., reduced process cost, high material removal rate, and less environmental concern due to the elimination of the cutting fluid. Process parameters in conventional machining operations like cutting speed, feed, and depth of cut play the most crucial role behind the generation of heat which also leads to microstructural changes, improved tool life, …
Published in Journal of Polymer & Composites Read article
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Empirical Relation to Predict Essential Oil Yield in Conventional Distillation System
Abstract: Peppermint is medicinal herb, and its extracts (essential oils) are of great importance because they are used in pharmaceutical, food, and cosmetic items. Moreover, peppermint oil is also used as anticancer, anti-bacterial, anti-viral, spasmodic, anti-diabetic, ulcer healing, anti-obesity, etc. Steam distillation method is used to extract essential oil from peppermint. Boiler, extraction unit, condenser and Florentine flask are the main components of steam distillation system. The objective of present study …
Published in Journal of Polymer & Composites Read article
-
Effect of Initial Temperature and Diameter of Ethanol Droplet on Evaporation Dynamics in Convective Air Medium
Abstract: Ethanol is a suitable biofuel as it has fewer toxic emissions and higher-octane numbers. For spray combustion applications, the gas phase motion must be considered while numerically investigating the fundamental aspects of droplet evaporation and combustion processes. Hence, we have numerically simulated the evaporation dynamics of an isolated spherically shaped ethanol droplet under a forced convective air environment in the absence of gravity. The momentum transfer between two phases is …
Published in Journal of Polymer & Composites Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Numerical Study and Comparison of Passive Mixing in Helical Micromixers
Abstract: A passive mixing inside three micromixers has been studied with water as the mixing fluid. Since the mixing at the micro-level is governed by species diffusion hence it is a time-consuming process that requires an extended length of micromixer for the required amount of mixing. The present study tackles this problem by introducing two helical micromixers, a Three-dimensional helical micromixer (TDHM), and TDHM having four inlets (TDHM-FO). These micromixers need …
Published in Journal of Polymer & Composites Read article
-
Studies on the Influence of Squeezed Stir Casting Parameters on the Strengthening Properties of AZ91Mg Alloy
Abstract: In this research, optimum squeeze stir casting parameters of AZ91 Mg alloy has been investigated by considering its strengthening properties. Melting temperature, squeezed pressure, and molding temperature is the key parameters that are considered for this investigation. The result of this research reveals that 750°C melting temperature, 250 MPa squeezed pressure and 250°C molding temperature represent a significant combination with its strengthening properties in AZ91Mg alloy. This combination is confirmed …
Published in Journal of Polymer & Composites Read article
-
Analysis of Crashworthiness of a Saloon Car Fitted with CNG Cylinder
Abstract: There is an increase in demand for compressed natural gas vehicles in India. Due to the high gasoline prices and lack of electric vehicle infrastructure in India, compressed natural gas vehicles are the only feasible option. This research work focuses on the crashworthiness of a saloon car fitted with a compressed natural gas cylinder under rear-collision conditions. Four different candidate materials of the same thickness are chosen for the cylinder …
Published in Journal of Polymer & Composites Read article
-
Competency of Natural Fiber Based Eco-Friendly Friction Lining Composites Over the Conventional Friction Material
Abstract: The Braking system is important system of automobiles and is responsible for providing better performance and safety. A Millions of automobiles are frequently decelerated and stopped at heavy traffic zone. Overall performance of vehicle braking system depends on braking conditions and brake material. All friction based application releases wear products; either gaseous form or particulate matter form and braking system is prime source of non exhaust particulate matter emission. The …
Published in Journal of Polymer & Composites Read article
-
Inhibitory Potentials of Datura Metel to Prevent Mild Corrosion
Abstract: The resistance of mild steel to corrosion was evaluated by immersing it in well water and determining the weight it lost after being allowed to return to room temperature after the submersion. The effectiveness of mild steel's ability to withstand corrosion was evaluated using this approach. A reduction in total body mass has an influence that is connected to and helps play a role in the prevention of rusting from …
Published in Journal of Polymer & Composites Read article
-
Application of Sensor Effect on Chlorodiazepam of Polyaniline Doped Silver Nanocomposite
Abstract: In order to ease the creation of the polymeric nanocomposite known as PANI/Ag, pani-doped silver nanoparticles were oxidised chemically and then exposed to the oxidation process. Aniline with varying amounts of silver nanoparticles added to it can be used to make a nanocomposite known as PANI/Ag in an acid solution at room temperature by employing ammonium persulfate as the oxidising agent. This can be done by using aniline with different …
Published in Journal of Polymer & Composites Read article
-
Extraction, Isolation, Characterization of Curcumin-I From Curcuminoids
Abstract: The major goal of this study is to extract, isolate, and characterize curcumin-I, a component of curcuminoids. Turmeric, or Curcuma longa Linn., plays a significant role in Ayurvedic medicine. Turmeric, or Curcuma longa Linn, is the popular name for this plant. An array of chemicals with biological activity may be more easily extracted with the help of this seasoning. Some of the compounds at play include curcuminoids and turmerone, although …
Published in Journal of Polymer & Composites Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Eco-friendly Azadirachta Indica Ash and Miscanthus Fiber Brick for Carbon Neutrality Environment
Abstract: Naturally grown fiber are not utilized properly they are neglected as wastes. These resources are thrown away due to insufficient research being conducted to discover viable uses for naturally existing fibres. These byproducts have a wide variety of applications in the manufacturing sector, notably in the construction sector. The prospective applications of miscanthus fibre, which may be found growing wild in uncultivated places, are investigated in this research. The production …
Published in Journal of Polymer & Composites Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box- Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article
-
Cubic B-splines for Isogeometric Analysis of Laminated Composite Plates Subjected to Hygroscopic Loading Using Classical Laminated Plate Theory
Abstract: Composite laminates are inevitably used in several engineering structures due to their high strength and stiffness to weight ratio. The laminates are subjected to change in moisture content and the flexural behavior leads to change in the strength. Presence of moisutre may induce residual stresses and strains. Isogeometric analysis is a well-proven method to perform analysis of laminated composite plates. The main focus of this study is to apply isogeometric …
Published in Journal of Polymer & Composites Read article
Archive on its own page →
Volume 14 (2026) 508 articles
Volume 13 (2025) 555 articles
Volume 12 (2024) 229 articles
Volume 11 (2023) 147 articles
Volume 2 (2023) 1 article
- Issue 2 1 article