Journal of Polymer & Composites
Volume 2, Issue 1 (2023)
Published
Table of contents
-
A Study on the Sintering Behavior of Al2O3/Y2O3 Doped ZrO2 Composites
Abstract: AbstractZirconia ceramics are widely used as cutting tools due to their very high hardness, excellent fracture toughness, flexural strength, and wear-resistance properties. Tetragonal zirconia exhibits better mechanical properties due to the transformation toughening of zirconia. The superior mechanical properties in zirconia are mainly due to higher density and controlled microstructure. In the present work, an attempt has been made to prepare near full-dense zirconia bodies with controlled microstructure by optimizing …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 1–8 Read article
-
Fabrication and Characterization of Jute Fiber Reinforced PP-Clay-based Nanocomposites
Abstract: AbstractNanocomposite is a new concept in the field of plastic-based composites. Jute fabric (hessian cloth)-reinforced polypropylene (PP) composites with different nanoclays were prepared by compression molding. Jute fiber content in the composites was approximately 50%. Mechanical properties of PP-clay blend and PP-clay/jute fiber composites were characterized. It was found that 5% clay containing PP-clay/jute composites showed the best results. Tensile strength (TS), elongation at break (EB) and tensile modulus (TM) …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 19–29 Read article
-
Ionic Conductivity of Chain Extension Supramolecular Polymer Material based on Reactive Hydrogen Bonding Motif
Abstract: AbstractSelf-assembly of low molecular weight oligomers possessing good mechanical properties at room temperature and having a low melt viscosity at elevated temperatures are of interest for many applications, such as hot melts and thermoplastic elastomers. Association between end groups can be based on a variety of secondary interactions, such as Vander Waals, hydrophobic, ionic interactions, or hydrogen bonding. A low molecular weight poly (ethylene glycol) (PEG) was functionalized with 2-Ureido-4[1H] …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 30–36 Read article
-
Creep Analysis Characterization and Study of Biodegradation Effect on Compression Molded LDPE/Cellulose Composites
Abstract: AbstractSynthetic polymers are important industrial materials, but their everyday use is hazardous to the environment. The solution to this seems to lie in modification of their structure through blending with biopolymers. Low density polyethylene (LDPE) and Cellulose were used in sample preparation for research in this work. LDPE/starch composites have undesirable properties and so there was need to explore LDPE/cellulose composites and evaluate their susceptibility to primary biodegradation. Compression molded …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 37–45 Read article
-
Investigation on Properties of Water and Methylene Chloride Blown Rigid Polyurethane Foam
Abstract: Physical properties are important parameters which influence the other properties and performance of rigid polyurethane foam (RPUF). Water and methylene chloride are the important ingredients of RPUF which act as blowing agents and influence the density, morphology and fire properties. RPUF samples were prepared from crude 4, 4’-diphenylmethane diisocyanate (CMDI), polyether polyol, triethylene diamine (TED), 1, 4-butane diol, polysiloxane ether, water and methylene chloride. RPUF with different densities were prepared …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 46–54 Read article
-
Effect of High-Shear Mixing on Alignment of Carbon Nanofiber/Epoxy Nanocomposites
Abstract: AbstractOne of the major technological issues limiting widespread use of epoxy polymer nanocomposites containing carbon nanofibers is processability, where the dispersion or alignment of the nanofibers is crucial to performance of the composite. Poor dispersion of the nanofibers can lead to deterioration in properties, while aligning them affords the opportunity to maximize properties in a given direction. The authors have recently investigated the effect of high-shear mixing as a potential …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 9–18 Read article