Journal of Polymer & Composites
Volume 14, Issue 5 (2026)
Table of contents
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Hybrid Agro-Waste Reinforced PLA Smart Composites with Embedded NFC for Sustainable Lifecycle Monitoring
Abstract: The growing demand for sustainable engineering materials has accelerated the development of biodegradable polymer composites capable of combining structural performance with intelligent lifecycle management. In this study, a smart biodegradable agro-waste polymer composite reinforced with rice husk and sugarcane bagasse fibres was developed using a polylactic acid (PLA) matrix integrated with an embedded passive Near Field Communication (NFC) tag for digital traceability and circular economy applications. The composite containing 80 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Electrically Conductive Micro-Aluminum Reinforced Polymer Composites for IoT-Enabled Lightweight Antenna Housings
Abstract: Electrically conductive polymer composites have emerged as promising multifunctional materials for lightweight antenna housings by integrating structural strength, electrical conductivity, thermal stability, and electromagnetic interference shielding. In this study, micro-aluminum reinforced Acrylonitrile Butadiene Styrene (ABS) polymer composites were fabricated using twin-screw melt compounding followed by compression molding for IoT-enabled lightweight antenna housing applications. The influence of micro-aluminum loading on microstructure, mechanical performance, electrical conductivity, EMI shielding, thermal stability, and wireless …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Multifunctional Corn Husk Fibre/PLA–PBAT Hybrid Composites with Carbon-Black Percolation for Structural Self-Sensing Applications
Abstract: This study developed multifunctional polymer composites based on a PLA/PBAT (Polylactic Acid/ Poly(butylene adipate-co-terephthalate)) thermoplastic matrix reinforced with 20 wt.% corn husk fibre (CHF) and functionalized with conductive carbon black (CB) for smart consumer-electronics casings. Alkali treatment modified the lignocellulosic fibre surface, improving fibre–matrix interfacial adhesion and stress transfer within the polymer composite. Thermal characterization showed that the PLA cold-crystallization temperature decreased from 112.5 °C for the unfilled blend to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
AI-Optimized Nano-Silica Reinforced PCM Composites for Predictive Solar-Thermal Energy Storage Networks
Abstract: This study presents an AI-optimized nano-silica reinforced polymer composite phase change material (PCM) for predictive solar-thermal energy storage networks. The proposed composite combines paraffin wax, high-density polyethylene (HDPE), and uniformly dispersed nano-silica particles to improve thermal conductivity, structural stability, leakage resistance, and long-term cycling performance. The composite was fabricated through melt blending and ultrasonication-assisted nanoparticle dispersion, followed by comprehensive morphological, chemical, thermal, and thermophysical characterization using scanning electron microscopy (SEM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
An Experimental Study on the Fabrication and Mechanical Properties of Natural Fiber Reinforced Polymer Hybrid Composites
Abstract: Natural fiber-reinforced polymer composites are increasingly investigated as lower-impact alternatives to conventional synthetic fiber systems. This work fabricated and mechanically characterized a sisal-coconut coir fiber-reinforced epoxy hybrid composite and compared its performance with a glass fiber-reinforced polymer (GFRP) epoxy composite under the reported laboratory conditions. The hybrid reinforcement contained 75% sisal fiber and 25% coconut coir fiber and was incorporated into an epoxy LY556/HY951 matrix by the hand lay-up technique. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Mechanical Characterization of Untreated Banana Fiber Reinforced PLA Bio-Composites Manufactured by 3D Printing
Abstract: This study investigates the development and mechanical characterization of fused deposition modeling (FDM) filaments utilizing polylactic acid (PLA) reinforced with untreated banana fibers (BF). To address the brittleness of pure PLA and valorize agricultural waste, composite filaments with fiber loadings of 0, 1, 3, and 5 wt.% were fabricated using a single-screw extruder. A Taguchi L16 orthogonal array was employed to optimize printing parameters, including fiber percentage, raster angle, infill …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
A IoT-Enabled Predictive Intelligence for Real-Time Failure and Damage Evolution Monitoring of Polymer Composites
Abstract: Damage assessment of carbon-fibre-reinforced polymer composites is still challenging since the damage occurs as a combination of matrix cracking, interfacial debonding, delamination and fibre fracture. The present work proposes a framework for predictive-intelligence based on IoT for multiaxial fatigue and compression-after-impact (CAI) CFRP experiments, employing publicly available acoustic-emission (AE) datasets. A causal CNN–GRU attention model is developed by integrating time-domain, spectral, wavelet, loading-history and trend features to estimate the damage …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Thermo-hydraulic Performance of Multi-Pass Double-Pipe Heat Exchangers: Integrating Polymer Composite Tube Wall Materials via CFD Parametric Study and Experimental Validation
Abstract: Metallic materials such as steel and copper have traditionally dominated heat exchanger manufacturing because of their excellent thermal conductivity, mechanical strength, and long-established industrial reliability. However, their high weight, susceptibility to corrosion in aggressive operating environments, and inability to provide tunable thermal properties have motivated interest in alternative materials for next-generation thermal systems. Thermally conductive polymer composites reinforced with graphene nanoplatelets (GNP), boron nitride (BN), and carbon-based fillers offer an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Polymer and Polymer-Metallic Reflective Materials for Solar Thermal Applications: A review
Abstract: Reflective materials play a critical role in determining the optical and thermal performance of solar thermal systems by controlling the concentration and utilization of incident solar radiation. This review examines the application and performance of polymer-based and polymer-metallic reflective materials for solar thermal applications, with particular emphasis on their suitability for solar cookers and concentrating solar technologies. Four commonly used reflector materials—aluminum foil, anodized aluminum, Mylar (metallized polyester film), and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Geosynthetic polymeric material Reinforced Model Shallow Foundation's Monotonic and Cyclic Uplift Response Affected by Ground Inclination
Abstract: The foundation system of any structure is vital for ensuring safety, serviceability, and performance, particularly when subjected to vertical and uplift forces. While conventional foundations are primarily designed to resist compressive loads, structures such as transmission towers, offshore platforms, buried pipelines, retaining systems, and marine facilities are frequently subjected to uplift forces generated by wind, waves, buoyancy, and cyclic loading. Under such conditions, the uplift resistance of soil and uplift …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Experimental Analysis and Validation of Cellulose Fibre Insulation Structures Considering Thermal Properties
Abstract: Cellulose fibre insulation structures made from used newspaper can be installed in attics, filling gaps between doors and windows. Many researchers focused on loose-filled cellulose fibre insulation. This study investigates the thermal conductivity, R- Value and thermal transmittance of cellulose fibre insulation manufactured from recycled cellulose materials with densities ranging from 280 to 360 kg / m³ and specimen thicknesses of 10 – 30 mm. A total of 25 structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
An Aggregate-Breakage Percolation Model and ANN-Based Internal Validation for Curvature-Dependent Electrical Conductivity of MWCNT/TPU Nanocomposites
Abstract: Strain-dependent percolation models are mostly built and tested for uniaxial tension, yet many flexible sensors and stretchable devices work mainly in bending, where the outer fibre is stretched, the inner fibre is compressed and the strain changes with thickness. This study extends an aggregate-breakage percolation model, originally formulated for uniaxial strain, to through-thickness bending of a multi-walled carbon nanotube/thermoplastic polyurethane (MWCNT/TPU) nanocomposite. The local strain is taken as ε(y) = …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Numerical Investigation of Ply-by-Ply Failure and Strength Degradation in Composite Laminates Under Transverse Loading
Abstract: This paper represents the failure analysis of composite symmetric and antisymmetric laminate, when laminates were subjected to the transverse loading conditions. The load is uniformly distributed in a transverse direction. The analysis includes failure load and nature of failure by using theories of failure. The ply degradation material model is used to modify and update the properties of failed lamina and upgrades the properties of laminate. Laminate is modelled as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Multifunctional Lignin-Modified Jute/Bio-Epoxy Composites with MWCNT-Based Piezoresistive Self-Sensing for Sustainable Housing Applications
Abstract: This study develops a multifunctional natural-fibre-reinforced polymer composite based on alkali-treated jute fabric, bio-based epoxy, kraft lignin and a small amount of multiwalled carbon nanotubes (MWCNTs), with particular emphasis on polymer-matrix modification, fibre–matrix interfacial behaviour and intrinsic damage sensing. Kraft lignin was incorporated at 0, 2, 4 and 6 wt.% to examine its influence on polymer-chain mobility, interfacial morphology, thermal stability and mechanical response, while 0.5 wt.% MWCNTs was introduced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Polymer Composite Phase Change Materials: Materials Design, Processing, Characterization, and Structure–Property Relationships—A Comprehensive Review
Abstract: Polymer composite phase change materials (PCPCMs) have been recognized as an innovative category of multifunctional polymeric materials, which could be tuned by appropriate materials design, composite formation, and interface modification. With the incorporation of phase change materials in polymer matrix systems and functional fillers, PCPCMs show improved mechanical properties, physicochemical stability, and functionality in contrast to traditional phase change materials. With recent advances in polymer science, nanocomposites, and processing techniques, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Thermo-Hydraulic Performance of a Double-Pipe Double-Pass Heat Exchanger using Annular Fins and Graphite-filled Epoxy Composite Tubes
Abstract: Double-pipe heat exchangers remain one of the most widely adopted thermal devices because of their simple construction, operational reliability, and ease of maintenance. Nevertheless, their performance is often constrained by the limited heat transfer area of smooth tubes and the long-term challenges associated with metallic materials, including corrosion, scaling, and structural weight. Recent advances in thermally conductive polymer composites provide an opportunity to overcome these limitations by replacing conventional metals …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Engineering of PEG-b-PCL/Pluronic F127 Polymeric Composite Micelles for Controlled Co-Delivery of Docetaxel and Curcumin in Prostate Cancer Therapy
Abstract: Polymeric composite nanocarriers made from amphiphilic block copolymers are popular for their customisable architecture, self-assembly behaviour, and drug release control. A PEG-b-PCL/Pluronic F127 micellar composite was developed and tested as a multifunctional nanocarrier for docetaxel and curcumin administration.The amphiphilic block copolymers Pluronic® F127 and PEG-b-PCL were employed to generate polymeric micelles using solvent evaporation-assisted self-assembly. The optimised polymer composite showed good colloidal stability and uniform size distribution with a zeta …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Mechanical Performance of Polyester Fiber-Reinforced PDMS Elastomer Composites for Soft Tissue Prosthetic Applications
Abstract: The most important property of the PDMS elastomers is their high biocompatibility, skin-like appearance, chemical stability, and flexibility, which make them ideal for use in maxillofacial and soft tissue prosthetics. Their relatively low tensile strength, tear resistance and long-term mechanical durability, however, restrict their clinical use. This work aimed to investigate the effect of systematic polyester fibre loading on the mechanical properties of PDMS elastomer composites for soft-tissue prosthetic applications. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Structure-Property Modeling and Engineering Optimization of Biodegradable Starch-Cellulose Biofoams for Sustainable Packaging
Abstract: Since the packaging industry is an engineered product with complex composites that involve a close relationship between composition, processing, and performance, optimization of formulation, cellular morphology, and engineering performance of biodegradable starch-based biofoams presents a considerable challenge. This study proposes a machine-learning-aided structure–property modeling framework to design and optimize starch-based biodegradable biofoams for sustainable packaging applications. A physics-informed synthetic dataset consisting of 10,000 formulations was created based on engineering relationships …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Polymer Chemistry and Nanocomposite Network Design of PEGDA-Based Hydrogels
Abstract: The chemical structure and crosslinking density of polyethylene glycol diacrylate (PEGDA) can be systematically tailored, making it a versatile polymeric network in biomedical engineering, drug delivery, tissue engineering, biosensing and advanced manufacturing. PEGDA is a polymerizable acrylate-functionalized hydrophilic PEG that can be polymerized to make three-dimensional networks via free-radical polymerization, specifically photoinitiated. The resulting network architecture depends on the PEGDA molecular weight, the concentration of precursors, the polymerization conditions, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Polysaccharide-Based Composite Materials for Hemostatic Applications in Trauma Care
Abstract: Uncontrolled hemorrhage remains one of the leading causes of preventable trauma-related mortality worldwide, highlighting the urgent need for rapid, effective, and biocompatible hemostatic materials. Polysaccharide-based composite biomaterials have emerged as promising candidates owing to their excellent biocompatibility, biodegradability, and intrinsic hemostatic properties. Natural polysaccharides, including chitosan, alginate, cellulose derivatives, starch, and hyaluronic acid, are increasingly combined with synthetic polymers, bioactive ceramics, metallic nanoparticles, and other functional additives to enhance mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
High-Performance Polymer Composites for Next-Generation Biomedical Sensor Interfaces
Abstract: High-performance polymer composites are emerging as versatile platforms for next-generation biomedical sensor interfaces because they can combine mechanical compliance, electrical functionality, biocompatibility, and structural tunability within a single material system. However, the rapid expansion of polymer matrices, conductive nanofillers, hydrogels, and biodegradable materials has produced a highly diverse literature, making it difficult to identify how material composition and interfacial structure determine sensor performance and clinical suitability. This review critically examines …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
CMC/SWCNT Nanocomposites for Sustainable Smart Metering Sensors: Percolation-Driven Structure–Property Optimization, Experimental Validation, and Literature Benchmarking
Abstract: Biodegradable sensing materials are needed for sustainable smart electricity metering, yet cellulose/single-walled carbon nanotube (SWCNT) systems lack a unified percolation and structure–property description. This study develops carboxymethyl cellulose (CMC)/SWCNT nanocomposite films by solution casting, with SWCNT loadings of 0.0–5.0 wt%, and evaluates their electrical, mechanical, thermal, sensing, and biodegradation behavior. Percolation analysis of the insulator-to-conductor transition gave a critical threshold (φc) of 0.9 ± 0.1 wt% and a critical exponent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Machine Learning-Based Optimization of Additive Manufacturing with Improved Mechanical Performance: Development of Sustainable Thermoplastic Composites
Abstract: Additive manufacturing has successfully manufactured lightweight, programmable and geometrically complicated components. However, reliable mechanical performance and efficient use of resources remain hard. This paper presents a machine learning (ML) based approach to optimize additive fabrication of sustainable thermoplastic composites with enhanced mechanical characteristics. The suggested approach combines material composition, printing settings and process circumstances to forecast and optimize tensile strength, flexural strength, impact resistance and dimensional stability. The aim is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Development of IoT-Enabled Circular-Economy Polymer Composites from Recycled Plastics and Agricultural Waste Fibers
Abstract: Circular polymer composites can help to decrease virgin resin consumption and provide value from agricultural waste, but there are still challenges with recycled-feedstock variability and poor fiber–matrix interfaces to achieve consistent performance. In this study, a circular composite system based on recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), bagasse fiber and rice-husk fiber was developed with the use of IoT technology. The polymer type, fiber type, reinforcement level (5, 10 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Machining Performance and Tool Wear Behaviour of 3D Carbon Fibre-Reinforced Silicon Carbide Composites
Abstract: 3D Cf/SiC composites, consisting of carbon fibers reinforced with silicon carbide are increasingly used in aerospace and defence due to their excellent mechanical properties and high-temperature strength. However, their heterogeneous, anisotropic, and abrasive nature makes them difficult to machine, resulting in accelerated tool degradation and poor surface integrity. This study explores the dry milling performance of 3D Cf/SiC composites using polycrystalline diamond (PCD) and cubic boron nitride (CBN) cutting tools. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Agricultural Waste-Derived Nanocellulose Composites in Pharmaceutical Packaging: Barrier Performance, Regulatory Considerations and Translational Gaps
Abstract: Pharmaceutical primary packaging is dominated by poly (vinyl chloride) (PVC), poly (vinylidene chloride) laminates and cold-form aluminium, chosen for barrier performance rather than end-of-life behaviour. Nanocellulose from agricultural residues is widely proposed as a renewable alternative, but almost the entire evidence base has been generated against food-packaging requirements. This review re-examines that literature through a pharmaceutical lens. A search of three bibliographic databases covering 2010–2026, supplemented by Google Scholar and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
A Review of Modified Cellulose for Electrochemical Energy Storage with a Multiphysics Framework for Quaternized Bagasse Nanocellulose/Al₂O₃–PEO Composite Electrolytes in Solid-State Batteries
Abstract: A critical review of modified cellulose for electrochemical energy storage is integrated with a potassium-specific multiphysics framework using cellulose obtainable from India-relevant feedstocks, including sugarcane bagasse, cotton/cotton stalk, banana pseudostem, Hibiscus/kenaf-type biomass, and other agricultural residues. The framework addresses the coupled requirements of ambient-temperature ionic transport, K⁺ selectivity, and mechanical integrity in solid polymer electrolytes. A hierarchical QCNF@Al₂O₃/PEO₁₆–KTFSI₁ architecture is evaluated in which quaternized bagasse cellulose nanofibers provide percolated reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Advanced Material Design and Fabrication Efficiency Using Cloud Computing: A Scalable Computational Framework for Polymer Nanocomposites
Abstract: The design of the material, the prediction of the properties and the fabrication techniques should be enhanced to efficiently use the high performance polymer nanocomposites. However, the traditional computational methods are often restricted by issues of scaling, computing cost, data integration, and processing time in assessing the complex combinations of polymers, nanofillers, processing factors and material characteristics. This work presents a scalable cloud-computing framework for the efficient design and fabrication …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Sustainable Utilization of Recycled Polymers in Bituminous Polymer Composites: Influence of Processing Technique on Mechanical and Durability Characteristics
Abstract: The growing accumulation of post-consumer polymer waste has intensified the need for sustainable recycling strategies capable of transforming them into value-added engineering products. Among various recycling approaches, the incorporation of recycled polymers into bituminous systems offers a promising pathway for enhancing pavement performance while supporting circular economy principles. This study investigates the sustainable utilisation of recycled Polymers in bituminous polymer composites and evaluates the influence of dry and wet processing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Predictive Modeling of Polymer Elasticity and Mechanical Strength Using Deep Learning for Functional Polymer Material Characterization and Performance Assessment
Abstract: Knowing the polymers elasticity and mechanical strength is essential in the characterization of functional polymer materials, for rapid characterization and to avoid extensive experiments. Traditional polymer characterization methods are often time consuming and resource intensive and the mechanical response of polymers can be nonlinear, thus complicating the prediction of the properties. These limitations can be overcome by introducing a Variational Temporal Fusion Transformer (VaTFT) for the deep learning prediction of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Deep Learning-Based Prediction of Elasticity and Mechanical Strength for Structure–Property Characterization of Functional Polymer Materials
Abstract: The prediction of the elasticity and mechanical strength of functional polymer materials is one of the key requirements for characterizing the structure–property relationship of such materials, which can greatly speed up polymer design, reduce the need for experimental characterization and enable the development of materials with mechanical properties appropriate to their functions. The existing works are based on the traditional machine learning model or deep learning model, which cannot be …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Explainable Digital-Twin Guided Self-Healing Biohybrid Polymer Nanocomposites for Autonomous Structural Health Monitoring in Aerospace Applications
Abstract: Concurrently, lightweight, multifunctional, damage-tolerant materials which can be used for continuous monitoring of the structural integrity under complex mechanical and environmental conditions are required for aerospace structures. In this paper, a hybrid bio-polymer nanocomposite based Explainable Digital-Twin Guided Self-Healing (EDT-SH-BPN) approach for autonomous structural health monitoring (SHM) and recovery in aerospace applications is proposed. The proposed system comprises a bio-derived epoxy/epoxidized natural rubber (ENR) matrix, embedded electrical sensing and self-healing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Sustainable Polymer Composite Materials for Civil Infrastructure: Materials, Performance, Durability, and Future Perspectives—A Critical Review
Abstract: The increasing need for sustainable, durable, and performance-based construction materials has led to the emergence and use of polymer composite materials in civil infrastructure. The benefits of such materials include the strength-to-weight ratio, being non-corrosive, flexible designs, and lower maintenance. This review focuses on the sustainable polymer composite materials, such as the fiber-reinforced polymer (FRP) composite materials, the natural fiber-reinforced polymer composites, the recycled plastic composite, and bio-based polymer composites, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
BioPolymer Chemistry in Biomedicine: Structure–Property Relationships, Advanced Materials, Clinical Applications, and Future Perspectives
Abstract: The area of biomedical polymer chemistry is one of the most crucial research fields in biomedicine, which can be used for the creation of new biomaterials with improved biocompatibility, function and clinical performance. In the past decade, the synthesis, modification, and nanotechnology of polymers have advanced significantly and today they can be used in many biomedical applications including drug delivery systems, tissue engineering, regenerative medicine, wound healing applications, implantable medical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Dual Dynamic Covalent Microcapsule Shells for Autonomous and Triggered Self-Healing in Polymer Matrix Composites
Abstract: We present a self-healing polymer composite system in which the traditional passive microcapsules are replaced by a dual dynamic covalent vitrimer shell. The shell consists of three interlocked layers, one of which is a brittle silica layer used to fracture at high stresses, and another is a vitrimer network, which employs disulfide metathesis and transesterification chemistries for autonomous healing of sub-critical microcracks. The shell design allows the realization of two …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Development and Characterization of Self-Healing Polyurethane Nanocomposite Coatings Incorporating Microencapsulated Corrosion Inhibitors for Marine Environments
Abstract: Chloride ions, dissolved oxygen, moisture and cyclic mechanical damage all infiltrate protective coatings and cause localized corrosion to occur in marine steel structures, resulting in continuous degradation. In this study, a self-healing polyurethane nanocomposite coating is developed by using microencapsulated corrosion inhibitors and the formulation effects are investigated using the Response Surface Methodology and Electrochemical Impedance Spectroscopy techniques. Using a Box-Behnken design, loading of microcapsules and hexagonal boron nitride nanofiller, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Neural Network Surrogate Model for Fast Prediction of Sheet Resistance and Transmittance in Polymer-Coated Silver Nanowire Electrodes
Abstract: Hybrid transparent electrodes that combine silver nanowire (AgNW) networks with conductive PEDOT:PSS overcoats are promising replacements for indium tin oxide in flexible solar cells, but their design requires balancing sheet resistance (Rs) against transmittance (T). Physics-based percolation simulations capture this trade-off but are too slow for large design searches. We present a neural-network surrogate trained on 3,000 Latin-hypercube designs from a Monte Carlo resistor-network simulator in which the polymer acts …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
A Review on Strengthening of RC Beam with GFRP Composite in Shear
Abstract: Glass fibre-reinforced polymer (GFRP) composites have emerged as an effective and lightweight technique for enhancing the shear performance of reinforced concrete (RC) beams, particularly in strengthening and rehabilitation applications. This review examines the influence of GFRP configuration on the shear behaviour, strength, cracking response, deformation, and failure mechanisms of strengthened RC beams. The discussion covers side-bonded, vertical and inclined GFRP strips, U-shaped wrapping, and complete wrapping configurations, with emphasis on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Flexural Performance of GFRP-Reinforced Concrete Beams with Shear Connectors and Web Stiffeners: Experimental and Numerical Assessment
Abstract: The The present study experimentally and numerically investigates the flexural performance of reinforced concrete beams incorporating Glass Fibre Reinforced Polymer (GFRP) reinforcement, mechanical shear connectors, and web stiffeners. Five beam configurations, namely CB-0, GB-1, GBS-2, GBW-3, and GBSW-4, were evaluated to determine their effects on load-carrying capacity, displacement, cracking behavior, strain development, energy absorption, and ductility. The conventional reinforced concrete beam CB-0 was considered the reference specimen. The experimental results …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-Wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 1–18 Read article
-
Polymer-Modified Fly Ash Concrete as a Sustainable Cementitious Composite for Low-Carbon and Durable Infrastructure
Abstract: There is a need for sustainable cementitious composites in the construction industry which can help in reducing carbon emission and increase the durability of the constructed infrastructure. The utilization of fly ash can not only benefit the environment, but also by adding polymer modifiers, a high-performance and low-carbon composite material polymer modified fly ash concrete (PMFAC) can be produced. The study examines the engineering potential and sustainability of PMFAC by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 101–114 Read article
-
Polymer Nanocomposites at the Nanoscale: A Comprehensive Review with Reference to Indian Regulations
Abstract: By combining nanoscale reinforcements with polymer matrices, polymer nanocomposites have become one of the most promising classes of advanced materials with superior mechanical, thermal, electrical, barrier and multifunctional properties. This extensive review critically analyses the scientific advances made in polymer nanocomposites between 2000 and 2026, with focus on recent advances in polymer nanocomposite development, processing techniques, structure–property relationships and new applications. The review covers the impact of the nanofillers which …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 115–129 Read article
-
Synthesis, Characterization, and Biomedical Applications of a Silver Nanoparticle-Coated Chitosan–Fucoidan–Polymer Nanocomposite Loaded with Persea americana Leaf Extract
Abstract: Consuming a natural composite of Persea americana (Avocado) leaf extract and a chitosan and fucoidan form a biodegradable biopolymer matrix–polymer nanocomposite with biomedical applications, this study explored a potential therapeutic method. GC–MS and UV spectroscopy were used to describe the aqueous leaf extract, which was verified by phytochemical screening to contain flavonoids, tannins, phenols, terpenoids, and alkaloids. The chitosan–fucoidan biodegradable polymer matrix served as a biocompatible stabilizing and encapsulating carrier …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 130–148 Read article
-
Parametric Effect on the Mechanical Property of Extrusion-Based 3D-Printed Parts
Abstract: Material extrusion-based 3D printing, a prevalent and economical approach for producing complex geometries, heavily relies on acrylonitrile butadiene styrene due to its advantageous mechanical properties and dimensional stability. Nevertheless, the mechanical integrity of 3D-printed components is considerably impacted by process variables. This research investigates the implications of critical parameters – layer height (LH), infill percentage (IP), and infill pattern design (IPD) – on the tensile, compressive, and flexural strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 160–170 Read article
-
Studies on the Self-Assembly of Steroids and DNA Mediated by Naphthalene-Based Amphiphilic Block Copolymer
Abstract: Amphiphilic block copolymers have attracted considerable interest in pharmaceutical and biomedical applications, including controlled drug release, gene delivery, and biomolecular sensing. In this study, fluorescent amphiphilic block copolymers were designed to facilitate interactions with biological molecules, such as DNA and antiviral agents, enabling their behavior to be monitored through fluorescence spectroscopy. Two novel block copolymers, poly(methyl methacrylate)-b-poly(dimethylaminoethyl methacrylate-co-naphthyl methacrylate) [PMMA-b-P(DMAEMA-co-NMA)] and poly(styrene)-b-poly(tert-butyl acrylate-co-naphthyl methacrylate) [PS-b-P(t-BA-co-NMA)], were synthesized successfully via atom …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 183–196 Read article
-
Hybrid Quantum–Machine Learning Framework for Nonlinear Rheological Modeling of Polymer and Composite Materials
Abstract: In polymer and composite materials, a major challenge lies in predicting their nonlinear rheological response, owing to complex multiscale interactions that are not captured by traditional constitutive laws or conventional machine learning approaches. In this study, a hybrid Quantum–Machine Learning (QML) model comprising Quantum Support Vector Machine (QSVM) and Quantum Neural Network (QNN) architectures is proposed for viscosity prediction without requiring any specific rheological equation. To train and test the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 19–35 Read article
-
Structure–Property-Guided Polymer–Metal Hybrid Design of a Wall Plastering Spray Assembly
Abstract: Wall plastering spray equipment requires a combination of low mass, dimensional stability, abrasion resistance, chemical compatibility with cementitious mortar, and comfortable operator interaction. The original assembly was primarily developed as a metallic mechanical system; however, a polymer-focused material architecture can reduce non-load-bearing mass while retaining a safe metallic pressure path. This study, therefore, presents a structure–property-guided polymer–metal hybrid design in which the pressure housing and nozzle insert remain metallic, whereas …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 197–211 Read article
-
Ultrasonic Dispersion of Halloysite Nanotubes for Enhanced Mechanical, Thermal, and Morphological Performance of Epoxy Composites
Abstract: Halloysite nanotube (HNT)-reinforced epoxy nanocomposites were prepared by mixing HNT with bisphenol-A epoxy (LY 556) using ultrasonication, followed by compression molding. HNT contents of 0–5 wt.% were used. The composites were evaluated for tensile strength, flexural strength, Shore D hardness, Izod impact strength, and thermal stability using thermogravimetric analysis (TGA). The fractured tensile surfaces were also examined to understand the failure mechanism and interaction between HNT and the epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 212–226 Read article
-
A Hybrid Artificial Intelligence Approach for Defect Detection in Fiber-Reinforced Composite Steels
Abstract: Defect detection in fiber-reinforced composite materials is important for maintaining product quality and ensuring structural reliability. However, manual inspection can be time-consuming and may depend on the experience of the inspector. This study presents a hybrid Convolutional Neural Network–Grey Wolf Optimization (CNN–GWO) approach for automated detection and classification of defects in fiber-reinforced composite materials. The proposed approach combines CNN-based feature learning with GWO-based hyperparameter optimization to improve the selection of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 285–310 Read article
-
Absorption-Dominated EMI Shielding in Benzoxazine/Epoxy Nanocomposites Reinforced with Graphene Oxide and Zinc Oxide
Abstract: Benzoxazine monomer was synthesized via a Mannich condensation reaction from phenolic and amine precursors, followed by thermal curing to form a crosslinked polybenzoxazine network for advanced composite applications. Electromagnetic interference (EMI) shielding materials based on lightweight polymer nanocomposites have attracted significant attention for advanced electronic applications. In this study, benzoxazine/epoxy nanocomposites reinforced with graphene oxide (GO) and zinc oxide (ZnO) at loadings of 5 and 10 wt% were prepared and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 345–365 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal–polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 36–47 Read article
-
Enhanced Deep Learning Techniques for Defect Detection in Steel-Fiber-Reinforced Composites: A Comparative Study of KerasTuner, CNN–PSO, and CNN–GWO
Abstract: The identification of microstructural defects in steel-fibre-reinforced composites is useful for the material integrity, mechanical reliability and longevity. Classic material inspection techniques face difficulties in recognizing the complex and visually similar defects because of heterogeneous material morphology, changing imaging conditions, and limits of manual feature extraction. To tackle those problems, this study presents a comparative deep-learning framework that integrates Convolutional Neural Networks (CNNs) with three hyperparameter optimization techniques namely KerasTuner, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 377–403 Read article
-
An Investigation on Influence of Gamma-Irradiation and Doping on Chemical Structures and Optical Properties of Conducting Polypyrrole
Abstract: In this study, the authors report on effect of gamma-irradiation and doping (bromine, iodine and sulfate ion) on chemical structure and optical, electronic properties of polypyrrole. Optical absorption spectrum of PPY shown absorption bands centered around 36.2.5 nm (peak 1), 450 nm (peak 2) and 525 nm (peak 3) positions. Gamma irradiation resulted in broadening of peak A together with a band shift of 45–525 nm and disappearance peaks 2 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 48–57 Read article
-
Tailoring the Compressive Behavior of Tetrachiral Auxetic Structures Through FDM Process-Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetrachiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have several useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetrachiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives a negative …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 58–70 Read article
-
Development of Polymersomes as Macromolecular Platforms for Nanomedicine
Abstract: The conventional method of drug delivery is plagued with instability, low targeting and low bioavailability. A solution to these shortcomings is the use of polymersomes, artificial vesicles that are produced through self-assembly of amphiphilic block copolymer, and they are suggested as universal nanoscale carriers. They have stiff, tunable membranes (thickness = 2–50 nm) due to accurate control of polymer chemistry, chain length, and hydrophilic mass fraction (f), which allows predictability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 71–89 Read article
-
Marine Algal Fiber-Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 90–100 Read article