Journal of Polymer & Composites
Volume 12, Issue 2 (2024)
Table of contents
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
Experimental investigation of humidification-dehumidification desalination system
Abstract: The aim of present study is to investigate an H-DH desalination system experimentally. The system consists of a solar air heater, a humidifier, and a dehumidifier connected with an evaporative cooler. The proposed system is operated in a closed loop configuration, at two airflow rates. The performance metrics are assessed via the examination of energy and economic factors. The solar air heater has the ability to produce hot air with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 104–113 Read article
-
Dynamic Performance Enhancement of Polymer Composites through Metaheuristic machinining optimization
Abstract: This work aims to provide an optimization of meta-heuristic algorithms in order to improve the dynamic behavior of composite materials utilized in various practical engineering tasks. Based on the Comprehensive literature review it has been observed that composite sandwich panels with PVC foam cores accomplished mechanical characteristics superior than those ones that were produced on PU foam core mainly in flexural, compression, and impact tests Thus the study establishes the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 114–129 Read article
-
Modelling of Large Elasto-plastic Deformations by EFGM
Abstract: Current work reports modelling and simulation of geometric and material nonlinearities arising due large elasto-plastic displacements in structural specimens by invoking enriched element free Galerkin method (EFGM). The displacement approximations are constructed by using moving least square approach. Standard displacement based approximations are modified by incorporating suitable enrichment functions depending on the nature of interfaces present in the components. Large deformations give rise to geometric nonlinearities which have been modelled …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 130–143 Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
Experimental Study on Load Transfer Mechanism in Columns Retrofitted by Bonding Precast Segments and FRP Wrapping
Abstract: An experimental study was conducted to investigate the load transfer mechanism in columns retrofitted with precast segments and Fiber-Reinforced Polymer (FRP) wrapping. As the demand for structural retrofitting grows, it becomes crucial to comprehend the behavior and effectiveness of retrofit techniques to ensure the safety and integrity of existing infrastructure. The study involved subjecting a series of column specimens to axial compression loads in order to evaluate the load transfer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 153–165 Read article
-
Study to evaluate and correlate the levels of heavy metals in dental calculus of burnt tobacco (Mishri) users and non-tobacco users with their periodontal status Using Atomic Absorption Spectrometry (AAS)
Abstract: The use of burnt tobacco products, such as Mishri, is associated with numerous health risks, including periodontal diseases. Heavy metals present in tobacco can accumulate in dental calculus, potentially exacerbating periodontal conditions. This study aimed to assess and establish a correlation between the levels of heavy metals present in dental calculus among burnt tobacco (Mishri) users and non-tobacco users, in relation to their periodontal health status. Utilizing Atomic Absorption Spectrometry …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 166–174 Read article
-
Numerical simulation and Artificial neural network illustration of phase-change material integrated into lattice structures printed in 3D
Abstract: This work examines the phase change material (P.C.M.) deposited in various lattice formations—such as “S.C., B.C.C., and F.C.C”.—at varied characteristics. The test concentrates on comprehending heat transport properties and thermal activity throughout the “melting and solidification processes”. The heater's maximum temperature, P.C.M. “melting and solidification”, and Nusselt number are among the essential factors examined. According to the findings, the heater's maximum temperature drops as porosity increases. Although the Nusselt values …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 175–183 Read article
-
Evaluation of composite material based on different phases of Face recognition System
Abstract: Composite materials can indeed play a crucial role in various phases of a face recognition system, offering advantages such as lightweight construction, durability, and tailored mechanical properties. Let's explore how composite materials can be utilized in different phases of a face recognition system. A composite material based different phases of Face recognitions System is software that recognizes or verifies a person based on a digital image or a frame from …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 195–204 Read article
-
Fabrication and Evaluation of Aluminum Hybrid Metal Matrix Composite via Powder Metallurgy Approach
Abstract: The growing demand for lightweight materials in modern automotive industries has spurred the development of Aluminum-based metal matrix composites (AMMC). Utilizing the powder metal-lurgy method for fabrication offers a cost-effective alternative to other methods. Composites of Al6061 with varying compositions of 6–18 wt% SiC (8 microns) and 6–18 wt% B4C (10 mi-crons) were prepared to assess their physical and mechanical properties. Scanning Electron Mi-croscope analysis revealed uniform dispersion of SiC …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 205–211 Read article
-
Comparative Seismic Analysis of Multistorey Core in Core Structure Using Beam, Fluid
Abstract: The main objective of this paper is to analyze and study the comparative analysis of multistorey core in core structure with beam, Fluid viscous dampers and bracings using Etabs. Core in core structures, also known as dual core structures, are a structural design concept employed in high-rise buildings to enhance their structural performance and increase resistance to lateral loads such as wind and earthquakes. The concept of core in core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 212–223 Read article
-
Dynamic Analysis of Reinforced Tall Structural Systems Connected in Series
Abstract: In recent years, there has been a notable surge in the development of multi-tower connected structures. This architectural phenomenon encompasses the creation of interconnected high-rise buildings that feature shared elements like podiums, sky bridges, or other forms of physical connection. These structures are designed to create a cohesive and functional complex that offers a range of amenities and promotes a sense of community. Dynamic analysis of horizontally connected reinforced concrete …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 224–234 Read article
-
Rotational Speed Influence on Weld Temperature in Friction Stir Lap Joint of Aluminium Alloy 6061 Using Numerical Simulation
Abstract: The weld quality assessment in friction stir welding depends on the choice of suitable weld parameters. Rotational speed is one such parameter. The study utilizes a computational fluid dynamics model to examine the influence of various rotational on the workpiece and weld interface temperature. The workpiece selected for this study is an Aluminium Alloy 6061, while the tool employed is a truncated conical pin tool featuring a conical shoulder in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 235–245 Read article
-
Comparison of Index and Engineering properties of weak soils stabilized by Rubber Tyre Chips and Powder
Abstract: Engineered constructions on weak or soft ground soil carry inherent risks due to the instability of the foundation. Soft ground lacks the necessary strength to support structures adequately, making it prone to settlement, subsidence, or even collapse under the weight of buildings or infrastructure. Various methods of improvements are used to improve the soil's stability to support various loads.one of the solution is can use the waste products incorporated into …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 24–33 Read article
-
Microstructural and Mechanical responses of Al6061 alloy matrix composite reinforced with yttria particles
Abstract: The increasing need for materials that can improve the overall performance of automotive and aerospace components has driven the development of composite materials. Aluminium Metal Matrix Composites (AMMC) have become a popular alternative due to their ability to satisfy the changing needs of industries. This study investigates the mechanical characteristics of AMMC (Aluminium Matrix Metal Composite) made using the stir casting method. The study examines the effects of different amounts …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 246–252 Read article
-
Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars
Abstract: It has been known for decades that geopolymer will significantly replace cement's function in construction industry. Geopolymer has low creep and shrinkage and a peak compressive strength. That is as per a recent study, geopolymer mortar is made by Fly ash and GGBS. The composition includes (100-60%) GGBS with a 10% substitution of fly ash. Alkali activators used in the research are sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). In …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 253–264 Read article
-
Parametric optimization and validation of novel 3D scanning approach for sustainable manufacturing of patient-specific orthodontic retainers
Abstract: The purpose of the proposed study is to identify the ideal procedure parameters for 3D scanning a denture in order to produce customised orthodontic retainers that can be produced sustainably. However, pilot investigations rarely explore parameters like scanning angle, light intensity, or scanning distance. In order to lower acquisition error, the suggested study examines a method for forecasting the ideal values of the previously indicated scanning parameters. Based on the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 265–278 Read article
-
Finite Element Analysis of Spur Gear Manufactured of Al7475-SiC Composites
Abstract: The spur gear is used in power transmission systems in industrial and automotive sectors. But sometimes, these gears have problems with their teeth due to excessive stress and wear. Some gears don't work as well, so in the present work better material is used to make them work well. Composite materials, which is known for their optimal strength-to-weight ratio and weight reduction benefits. So, these materials are considered substitutes for …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 279–284 Read article
-
Current Trends and Future Trajectories: Polymer-Modified Concrete in the Context of Bangladesh
Abstract: Polymer-modified concrete (PMC) presents itself as a novel way to improve the characteristics of conventional concrete, tackling a variety of issues in the building industry. This paper explores the present dynamics and future potential of PMC, with a focus on Bangladesh, a fast-expanding country with unique environmental, economic, and infrastructure needs that call for the use of cutting-edge building materials. The benefits of polymer modification, such as increased durability, flexural …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 285–294 Read article
-
Parametric optimization of residual stress of TiO2 composite coating
Abstract: The primary objective was to develop a composite coating by utilizing the HVOF thermal spray technique and including TiO2. The substrate was covered with a high-quality composite layer utilizing the HVOF coating process. The TiO2-based powder and carbon powder were initially combined in the mixer for deposition. The composite powders were applied via an HVOF torch, namely the PT F4 model. The firearm frequently produces a high-speed flow of extremely …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 295–301 Read article
-
Effect of Compressive Strength of Core and Precast Concrete on the Behavior of Column Retrofitted by Precast Segment and FRP Wrapping - A Finite Element Study
Abstract: In the present investigation the effect of compressive strength of core and precast concrete on the behavior of columns retrofitted by attaching precast segments and followed by FRP wrapping through Finite Element Analysis. A rectangular column converted into an elliptical column by attaching precast segment is modeled using ANSYS workbench, A Finite Element Analysis software. A Finite Element Model is developed, considering various structural parameters such as grades of core …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 302–310 Read article
-
Review of Input Selection Criteria; Comparison of Popular Methods Used in Water Stress Analysis.
Abstract: This paper examines input variables and their respective selection criteria intended for application in methodologies addressing water scarcity. It presents a comparative analysis of prominent approaches utilized in assessing water stress within urban contexts, such as the Analytic Hierarchy Process (AHP), Multiple Criteria Decision Making (MCDM), Geographic Overlay Decision (GOD), and System for Integrated Assessment of City Transformation towards Sustainability (SINTACTS). The principal aim is to scrutinize prevailing input parameters …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 311–319 Read article
-
A Study of The Performance of surface modified NACA 2416 Airfoils at various Angles of Attach at Re80000
Abstract: This study delves into the aerodynamic effects and characteristics of surface-modified NACA 2416 airfoils, placing a greater emphasis on the aerodynamic efficiency of a two-dimensional surface-modified NACA 2416 airfoil under subsonic flow conditions at Re=80000 and various angles of attack (AOAs). The surface-modified airfoils were crafted using CATIA V5, and simulations were conducted in ANSYS Fluent for angles of attack ranging from 0° to 12°.The CFD results encompass a broad …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 34–39 Read article
-
Investigation on Structural Behavior of RC Beam-Column Joints: State-of-the-art
Abstract: Beam-column joints (BCJs) are critical structural elements in buildings, influencing overall structural performance and safety. This review paper presents a comprehensive analysis of findings of research showing concern about various aspects of BCJs, focusing on eccentricity effect, numerical investigation, joint behavior, shear strength, retrofitting strategies, and recent advances. Through experimental studies, numerical simulations, and analytical approaches, various studies have made significant progress in understanding BCJ response to various loading circumstances …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 40–68 Read article
-
Experimental Investigation of Mechanical Properties of AR Glass Fibre Reinforced Self Compacting Concrete
Abstract: The plain cement concrete has brittle in nature and low tensile strength. Self-Compacting Concrete (SCC) is an efficient choice in construction because of its inherent capacity to fill gaps and flow without the need for external vibration. The necessity of self-compacting concrete can be recognized by seeing the growing issue of a trained labour shortage in the building sector. The advantage of SCC is that it allows for an earlier …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 69–79 Read article
-
Design and Reliability Analysis of Polymer Pervious Concrete Mix for Preparation of Paver Block
Abstract: Porous concrete is a specially designed kind of concrete featuring high water porosity, allowing water to readily move through the already present interconnecting vast porous structures. The present experimental study emphasized on the production of permeable concrete with a lower Portland cement and recycled aggregate aggregates building environmentally friendly permeable pavements. The literature review suggested in most of the studies the use of single size of aggregate in the pervious …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 8–23 Read article
-
Strength and Compressibility Behaviours of Expansive Soil Treated with Coffee Husk Ash and Xanthan Gum
Abstract: The strength of the sub-grade, the caliber of the subbase and base course, the surrounding conditions, and the characteries of the soil utilized are some of the variables that might impact how long a road lasts. Because expansive soil swells and shrinks in response to variation in moisture content, roads constructed on it are especially vulnerable to early deterioration. Buildings with black cotton soils have experienced different settlement due to …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 80–90 Read article
-
Assessment of Chlorides In The Water Samples And Its Absorption By Thermosetting Polymer Phenol Formaldehyde Resin
Abstract: Assessing chloride levels in water samples is critical for monitoring water quality and ensuring environmental and public health protection. This study presents a comprehensive methodology for estimating chloride concentrations in water samples through various analytical techniques, including titration. Results obtained from each method were compared and discussed to evaluate their accuracy, and applicability in different environmental settings. The data shows that the samalkot drinking water sample has a relatively high …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 91–98 Read article
-
Influence of Different Fluxes on the Angular Distortion of A-TIG Welded 316L Steel Plates
Abstract: The conventional Tungsten Inert Gas (TIG) welding process is an autogenous welding process primarily used to weld thin metal sheets in the food processing and chemical industry. The process can weld almost all engineering materials but suffers from the limitation of slow speed and inability to weld thick sections. With the development of A-TIG welding, some of the drawbacks of traditional TIG welding have been addressed, where the activated flux …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 99–103 Read article