Journal of Polymer & Composites
Volume 14, Issue 3 (2026)
Table of contents
-
Thermo-Fluid Characterization of Corrugated U-Tube Shell-and-Tube Heat Exchanger with Polymer Composite Tube Wall: A Combined CFD and Experimental Investigation
Abstract: Shell-and-tube heat exchangers built with metallic tubes work well thermally, but corrosion problems, extra weight, and the inability to adjust the wall’s thermal properties through material choice remain genuine engineering headaches, particularly for corrosive or weight-critical applications. Over the past few years there has been a fair amount of interest in replacing metal tubes with polymer composite alternatives, since blending thermally conductive fillers — graphite nanoplatelets, boron nitride platelets and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Enhance Thermal and Conductive Properties through Graph Neural Network-Based Machine Learning-Driven Advanced Polymer Material Design
Abstract: Advanced polymer materials are widely used in modern engineering and manufacturing because of their lightweight nature, flexibility, durability, and adaptability to different applications. However, designing polymer materials with enhanced thermal and electrical properties remains a challenging task. The performance of polymers is influenced by a complex combination of molecular structures, filler materials, processing parameters, and nanoscale interactions. Conventional optimization methods often require extensive experimental trials and computational resources, making it …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Recent Advances in Hybrid Polymer–Cement Composites: Interfacial Engineering, Self-Curing Mechanisms, and Microstructural Performance
Abstract: The increasing demand for high-performance polymer-modified cementitious composites has stimulated extensive research into hybrid self-curing composite systems with engineered aggregate phases. Self-curing hybrid polymer–cement composite systems, using recycled aggregates, constitute one of the solutions proposed by researchers to overcome problems related to moisture loss during the curing process, shrinkage, cracking, and the limited amount of natural aggregate available. This critical review provides an overview of recent developments concerning the production, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Valorization of shrimp processing waste by green methodology and its application in Chitosan-PEG composite film
Abstract: Shrimp processing waste is mostly unidentified marine by product, presents considerable environmental pollution which also offers a rich but not fully exploited sources of biopolymers. The current work presents a sustainable method to convert shrimp processing waste into chitosan a biopolymer by green methodology. Isolation of chitin to chitosan from shrimp processing waste was carried through four green methodology steps i. Demineralization using citric acid ii. Deproteinization using papain iii. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Develop the Design of Sustainable Polymer Materials: Applying Reinforcement Learning, IoT-Enabled Monitoring, and Data-Driven Manufacturing Approaches
Abstract: Sustainable polymer materials development is a must due to resource constraints, environmental concerns, and the demand for designed materials with high performance. When it comes to material optimization, energy utilization, process unpredictability, and lifecycle sustainability, traditional polymer production methods have their challenges. Reinforcement Learning (RL), Internet of Things (IoT) monitoring, and data-driven production are utilized in the design and manufacturing of sustainable polymer materials. It is recommended to use Internet …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Comparative Analysis of Polymer-Enhanced and Conventional Magnetorheological Fluids in E-Bicycle Semi-Active Suspension
Abstract: In light of the increased use of electric bicycles as a sustainable transport means, various mechanical challenges emerge which were absent in traditional bicycles, primarily concerning vibration isolation and riding comfort. Indeed, hub motors, batteries and the entire drivetrain system produce dynamic excitations which passive suspension cannot handle effectively. This paper presents a comparison of conventional magnetorheological (MR) fluid and the polymer-based MR nanocomposite fluid within the context of semi-active …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Recent Advances in Smart Polymer Composites for Plant Health Monitoring: A Strategic Integration of Sensing Mechanisms and Computational Intelligence
Abstract: Plant health assessment is crucial for agricultural production and food security, as plant diseases significantly affect crop yields and quality. This paper reviews the applications of polymers and composite materials in the evaluation of plant health, focusing on both natural and artificial polymers, carbon materials, and polymeric–nanoparticle composite materials. Various types of sensing principles, such as colorimetry, fluorimetry, surface plasmon resonance (SPR), surface enhanced Raman scattering (SERS), and interferometry, are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Generative AI-Based Inverse Design of Sustainable Biodegradable Polymers with Target Mechanical and Thermal Properties
Abstract: The escalating global plastic pollution crisis has intensified the urgent need for sustainable biodegradable polymer alternatives that can match or exceed the performance of conventional petroleum-based plastics while minimizing environmental impact. However, traditional polymer discovery approaches are severely constrained by high experimental costs, protracted development cycles spanning years, and fundamental inability to simultaneously optimize multiple conflicting material properties such as mechanical strength, thermal stability, and degradation kinetics. This study presents …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Analyzing Thermal Expansion in Polymer Composites Through Heat Transfer Simulations
Abstract: Although lightweight and strong, polymer composites require careful handling in environments where temperatures shift. Their usefulness in fields like aviation, vehicle manufacturing, and electronic devices comes from customizable heat behavior alongside favorable mechanical traits. Yet variation in size due to heating or cooling remains a concern hard to dismiss. As conditions change, expansion occurs - sometimes enough to disrupt fit, alignment, or function within complex systems. This response to warmth …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Design and Development of Lightweight Polymer Composite Manifold Using CF-ABS and GFRP for Aerodynamic Energy Recovery in Electric Vehicles
Abstract: Electric vehicles provide a number of advantages over conventional fuel vehicles due to their low to no emissions. High energy efficiency improves the driving performance of Electric vehicles. However, they have to face certain challenges such as the high purchase cost of batteries and lack of battery charging facilities. The major drawback of an Electric vehicle is to store sufficient energy to run the vehicle for a long time. This …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Generative AI for Designing Sustainable Polymer Composites for Renewable Energy Applications
Abstract: Sustainable polymer composites are increasingly required for renewable energy devices, yet conventional trial-and-error formulation cannot efficiently balance performance, processability, recyclability, and environmental constraints. This study proposes a generative artificial intelligence framework for designing polymer composites for photovoltaic encapsulation, dielectric energy storage, polymer electrolytes, and thermal-management systems. Public polymer-property and composite datasets were curated from open databases and published supplementary records. Chemical descriptors, molecular fingerprints, polymer embeddings, processing variables, and sustainability …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products : A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Artificial Intelligence Techniques for Smart Polymer Nanocomposite Materials and Industrial Applications
Abstract: Protecting sensitive material data, manufacturing processes, and intelligent monitoring platforms is essential for the fast development of innovative polymer nanocomposite systems in fields such as aerospace, medicine, electronics, automobiles, and energy. In order to safeguard, consistently enhance, and optimize distributed industrial systems that consist of polymer nanocomposite materials, this study presents an AI-driven cybersecurity and cloud computing architecture. The suggested solution employs artificial intelligence (AI), machine learning (ML), cloud computing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Cardanol Glycidyl Ether in Advanced Materials: Recent Progress, Synthetic Strategies, and Future Perspectives
Abstract: Cardanol glycidyl ether (CGE), a bio-based precursor and epoxy derived product has been emerged as a promising sustainable alternative to conventional petroleum-based epoxy materials. Due to the presence of a phenolic hydroxyl group and an unsaturated aliphatic side chain, cardanol can be effectively undergoes glycidylation to produce reactive epoxy monomers that has excellent flexibility, hydrophobicity, low viscosity, and notably good chemical resistance. In recent years, CGE-based systems have attracted remarkable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
AI-Driven Framework for Accelerating Polymer Nanocomposite Commercialization in Computational Materials Engineering
Abstract: The remarkable mechanical strength increased functional qualities, lightweight structure, and thermal stability of polymer nanocomposites have prompted modern materials research to prioritize their rapid commercialization. Advanced materials can be created by adding nanoscale fillers such as carbon nanotubes, graphene, silica, and metal oxides to polymer matrices. These materials have applications in biomedical engineering, aerospace, electronics, packaging, and automobile manufacture. Research and development of polymer nanocomposites has traditionally relied on costly …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–19 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Polymeric Materials in the Anthropocene: Environmental Accumulation, Human Health Concerns, and Cultural Response
Abstract: Polymers made via conventional techniques are very useful because of their strength, adaptability, and cheap. Plastics are not degradable naturally, which creates lots of environmental issues. As plastic products degrade over time, they decompose into microplastics which enter the environment. These microscopic particles called microplastics have been identified in agricultural soils, freshwater and marine environments, and atmospheric dust, enabling their continuous movement through ecosystems and food webs. Recent research shows …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1016–1034 Read article
-
Multi-Scale Analysis of Polymer Based Energy Storage Systems for High Performance Battery Applications
Abstract: The energy storage systems based on polymers are becoming promising materials for the next generation of high performance batteries because of their excellent mechanical flexibility, improved safety, and favorable electrochemical properties. Even with computational tools in Python, polymer-based energy storage systems remain plagued by poor ionic conductivity, complicated electrochemical reactions and potential thermal runaway. Therefore, a multi-scale model is proposed to improve battery performance, thermal stability, reliability, and large-scale deployment …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1035–1048 Read article
-
Polymeric Nanocomposite Aided Bioaugmentation for Marine Oil Spills – A Review
Abstract: Bioaugmentation is a promising, cost-effective bioremediation technique that enhances the degradation of marine pollutants by introducing hydrocarbon-degrading microorganisms. This review explores recent advancements in the use of bioaugmentation for petroleum biodegradation in marine environments, emphasizing the integration of microbial systems with polymeric and composite materials. Innovative methods, such as the immobilization of microbial cells within biodegradable polymeric matrices (e.g., alginate, chitosan, polyvinyl alcohol), have significantly improved microbial viability, metabolic efficiency, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1049–1061 Read article
-
A Hybrid Multi-Physics Ensemble Deep Learning Framework for Simultaneous Prediction of Thermal and Electrical Conductivity in Functional Polymer-Based Nanocomposites
Abstract: Polymer-based nanocomposites have become promising materials for applications in energy storage, flexible electronics, biomedical devices, aerospace components, and advanced engineering because of their tunable thermal and electrical properties. Reliable prediction of these properties is essential for accelerating material design; however, existing analytical models and conventional machine learning techniques often fail to represent the complex interactions among filler characteristics, polymer matrices, processing conditions, and interfacial transport phenomena. This work presents HMEP-Net, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1062–1082 Read article
-
Polymers and others Advance Materials: A State-of-the-Art Review
Abstract: Developing emerging technologies requires pushing the boundaries of material science. Right now, conventional neat polymers simply do not last long enough in the field. They suffer from sudden mechanical failure, struggle with thermal instability, and throwaway disposal methods have created a massive environmental crisis. To tackle these exact issues, this review provides a critical evaluation of two rapidly growing solutions: sustainable bio-composites and self-healing polymer systems. Rather than offering a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 108–119 Read article
-
AI-Based Discovery of High-Performance Energy Storage Polymer Composites: A Comprehensive Review
Abstract: The accelerating global demand for high-performance energy storage systems has stimulated significant research into advanced polymer composites as next-generation electrolytes, electrode binders, and functional membranes for batteries, supercapacitors, and photovoltaic devices. However, the vast compositional and structural design space of polymer materials presents formidable challenges for conventional trial-and-error discovery strategies, which remain slow, costly, and biased by prior expert knowledge. Machine learning (ML) and artificial intelligence (AI) have emerged as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1083–1097 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
Comparative Assessment of Polymers and Composites for Solar Panels: Fundamentals, Performance Metrics, Manufacturing, and Sustainability
Abstract: This paper presents a comprehensive review of the main types of Photo Voltaic polymers and composites such as crystalline silicon (both mono- and poly-Si), thin-film tech (CdTe, CIGS, a-Si), perovskites, and organic/dye-sensitized cells and analyses the parameters such as efficiency, fill factor, open-circuit voltage, temperature response, and degradation. The analysis focusses on polymers and composites and manufacturing techniques like vapor deposition, roll-to-roll printing, and both solution and vapor techniques for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 120–130 Read article
-
Adaptive Drift Correction in Polymer-Based Wearable Biosensors via Data-Driven Signal Modeling
Abstract: Polymer-based wearable biosensors have emerged as a promising technology for continuous health monitoring due to their mechanical flexibility, biocompatibility, and suitability for long-term physiological interfacing. However, prolonged exposure to biofluids, environmental variability, and mechanical deformation introduces signal drift, which significantly degrades measurement accuracy and limits clinical reliability. This paper presents a data-driven methodology for compensating signal drift in polymer-based wearable biosensors using adaptive signal processing and machine learning techniques. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 131–139 Read article
-
Computational Modeling of Polymer Semiconductors for Electronic Applications
Abstract: Polymer semiconductors have become important materials in modern electronic applications because they combine semiconducting behavior with mechanical flexibility, low-cost processing, and tunable molecular structure. Their growing use in organic field-effect transistors, organic photovoltaics, organic light-emitting diodes, and flexible sensing devices has increased the need for accurate computational approaches that can predict material properties and device performance before experimental fabrication. This paper reviews the major computational modeling techniques used for polymer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 132–146 Read article
-
Comparative Analysis of the Structural Integrity and Dimensional Stability of Additively Manufactured Biopolymers vs. Thermoformed PETG: A 1-Year Retrospective Study on Polymer Performance in Orthodontic Applications
Abstract: Objective: This study aimed to evaluate the long-term dimensional accuracy and structural performance of direct 3D-printed biopolymers compared to conventional vacuum-formed Polyethylene Terephthalate Glycol (PETG) composites. The investigation focused on how different polymer processing methods (additive manufacturing vs. thermoforming) influence material thinning and resistance to occlusal stress. Methods: A retrospective analysis was conducted on 60 cases (n = 60) of post-orthodontic maintenance. The sample was divided into two cohorts: Group …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 140–146 Read article
-
Eco-Efficient Skies: Life Cycle Assessment and Carbon Footprint Minimization of Fiber-Reinforced Polymer Composites in Aerospace Application
Abstract: The increasing integration of fiber-reinforced polymer (FRP) composites in aerospace structures necessitates a rigorous evaluation of their environmental sustainability throughout their entire life cycle. This study presents a comprehensive life cycle assessment (LCA) and carbon footprint analysis of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) composites applied to structural and semi-structural components in commercial aerospace applications. Following ISO 14040/14044 standards and employing the ReCiPe 2016 Midpoint (H) impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–160 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Integrated DIPlib and OpenCV Framework for Precise Geometric Characterisation of Woven Fibre-Reinforced Polymer Composites
Abstract: The mechanical properties of woven fibre-reinforced polymer (FRP) composites stem entirely from the geometrical regularity inherent in their reinforcement structure. Changes in the size of the unit cell, fibre tow separation, weave angle, and fibre tow spacing will have an immediate effect on the stiffness and shear modulus of the material. In this paper, a combined machine vision system that incorporates both the OpenCV and DIPlib libraries is proposed for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 158–171 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Image-Based Evaluation of Implant Tissue Interface Integrity in Polymer Orthopaedic Devices
Abstract: Polymer orthopedic implants offer radiolucency and mechanical compatibility with bone, but long-term success depends on maintaining a stable implant–tissue interface. Routine imaging is widely available for follow-up, yet interface integrity is commonly judged qualitatively, limiting early detection of fixation compromise and reducing comparability across devices and time points. This work presents an image-based methodology to quantify interface integrity by extracting interpretable interface descriptors from a standardized interface belt around the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 170–179 Read article
-
Polymer Composite-Assisted Crystal Engineering for Drug Synthesis and Property Control through Solid Solutions and Co-Crystals
Abstract: The long-standing problem of low aqueous solubility, which affects about 90% of all new drug molecules under development, requires an immediate need for alternative approaches apart from the usual practice of crystallization. Polymer-composite-assisted crystal engineering is a novel technique for overcoming the aforementioned problem. This involves the addition of accepted pharmaceutical polymers, such as HPMC, PVP, PEG, and Eudragit copolymers in a single process, which can promote nucleation, stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 172–189 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Image-Based Quantitative Mapping of Structure Property Relationships in Polymer Composite Materials
Abstract: The performance of polymer composite materials is intrinsically governed by their microstructural architecture, which is shaped by manufacturing conditions and constituent interactions. Despite extensive experimental characterization efforts, establishing transparent and quantitative structure–property relationships from microstructural images remains a challenge. In this study, an explainable image-driven framework is developed to systematically correlate microstructural features with composite property indicators. Microstructure images are processed to identify voids, fibers, and filler phases, from which …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 188–196 Read article
-
Development and Comparative Study of Aluminium- Copper Metal Based Composite Through Different Routes
Abstract: The aim of this study is to develop aluminium-copper composite through powder metallurgy technique. Powder metallurgy is an art or technology which can produce exact dimension of final roducts utilizing less energy. Copper oxide (CuO) was used as the source of copper, which was extracted through a reduction process using dextrose. The reaction was thoroughly examined and reported. Commercially available aluminium powder served as source of the aluminium. Aluminium- copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 19–32 Read article
-
Smart Bio-Polymer Composite Systems for Sustainable Bio-Polymer Composite Media for Enhanced Pollutant Removal in Constructed Wetland Systems Using Machine Learning
Abstract: Constructed wetlands are widely used for wastewater treatment due to their low cost and ecological compatibility; however, their efficiency in removing emerging contaminants remains limited. This study presents the development of biodegradable polymer-based composite materials integrated into wetland filtration systems to enhance pollutant removal efficiency. Bio-polymers combined with natural fillers such as biochar and clay were synthesized and evaluated under simulated wetland conditions. The results demonstrate improved adsorption capacity, increased …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 190–200 Read article
-
Signal Drift Compensation in Polymer-Based Wearable Biosensors Using Data Processing Techniques
Abstract: Polymer-based wearable biosensors have emerged as promising platforms for continuous physiological monitoring due to their mechanical flexibility, low operating voltage, and compatibility with soft biological interfaces. However, their long-term deployment remains challenging because of signal drift caused by polymer ageing, hydration–dehydration cycles, ionic trapping, and environmental variations. These effects introduce baseline fluctuations and sensitivity degradation, which compromise the reliability and interpretability of physiological measurements. This study proposes a data-processing–driven framework …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 197–207 Read article
-
Polymer Based Optoelectronics in Clinical Application Treated with Sodium Fluoride and Aqueous Dimethyl Sulfoxide Solutions
Abstract: In polymer science, dimethyl sulfoxide (DMSO) and sodium fluoride (NaF) are frequently combined to dissolve, modify, or treat particular polymers, most notably in the processing of cellulose and the creation of polyvinylidene fluoride (PVDF) membranes. The viscosities, ultrasonic velocities, and sodium fluoride densities of aqueous solutions of dimethyl sulfoxide (DMSO) have been measured at T=303.15, 308.15, 313.15, and 318.15 K. Fluorides (such as NaF or TBAF) help break inter-chain hydrogen …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 20–29 Read article
-
pH-Responsive Smart Polymer Nanocomposites for Anti-Corrosive Coatings
Abstract: Metallic corrosion under adverse marine and industrial conditions imposes gigantic financial burdens and risks worldwide. Conventional waterproofing waterborne epoxy has passive barrier protection, but is also inherently microporous, lacking intrinsic repair ability against mechanical damage and thus rapidly decays. This is a critical gap that this work tries to bridge by designing a new pH-responsive hybrid polymer nanocomposite by using polyethyleneimine-tannic acid-cerium functionalized boron nitrate nanosheets with chitosan-capped mesoporous silica …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 201–213 Read article
-
Polymeric Micelles for Medicinal Plant Solubilization and Delivery of Bioactive Compounds
Abstract: This study involved the design, fabrication, and characterization of polymeric micellar nanocomposites utilizing amphiphilic block copolymers to effectively encapsulate and transport hydrophobic phytoconstituents. The selected bioactive molecule is curcumin, a polyphenol with limited water solubility. A polymeric system known as PEG-PCL was utilized to fabricate core-shell nanostructures by a solvent evaporation-induced self-assembly method. The resulting nanocomposites exhibited homogeneity and colloidal stability, characterized by a zeta potential of −18.7 ± 1.4 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 208–219 Read article
-
Physicochemical Transitions and Polymerization Dynamics in Multi-Generational Dentin Adhesives: A Critical Review of the Resin-Dentin Composite Interface
Abstract: Adhesive dentistry has undergone a transformative refinement over the past three decades, transitioning from technique-sensitive, multi-step etch-and-rinse protocols to streamlined universal formulations. This narrative review critically synthesizes evidence from thirty peer-reviewed investigations to evaluate the evolution of dentin bonding agents from the fourth through the eighth generations. The analysis places particular emphasis on the physicochemical dynamics of the resin-dentin interface, including interfacial bond strength metrics, marginal integrity, and microleakage behavior. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 209–228 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Machine Learning Optimization for VARTM Carbon Polymer Laminates
Abstract: Vacuum-assisted resin transfer moulding (VARTM) is a key low-cost, out-of-autoclave process for manufacturing large-scale carbon-fibre reinforced polymer (CFRP) laminates crucial to aerospace wings, wind-turbine blades, marine hulls, and automotive structures. Unpredictable resin flow often leads to voids, dry spots, and race-tracking defects, resulting in 27.9% scrap rates and lengthy, costly trial-and-error design cycles. Although surrogate models provide rapid impregnation predictions for simple flat-plate geometries, vision-based monitoring is limited to idealized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–245 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Data-Driven Digital Twin Model for Real-Time Strength Estimation in Polymeric Materials
Abstract: The real-time prediction of mechanical properties in polymeric materials is essential for ensuring quality, consistency, and operational efficiency in modern manufacturing systems. As industrial processes become increasingly complex, traditional trial-and-error approaches to material characterization are no longer sufficient to meet the demands of high-throughput production environments. This study introduces a digital twin-integrated machine learning approach for the real-time estimation of tensile strength in polymeric materials by combining simulation-driven insights with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 246–257 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Dynamic Response Analysis of Isotropic and Orthotropic Rectangular Plates under Clamped-Free Conditions
Abstract: This study explores Theoretical and numerical tools of determining the free vibration properties of isotropic and fiber-reinforced composite rectangular plates. The effect of anisotropy of materials on the dynamic response of the plates is compared between the Aluminium plates and the glass-epoxy laminates. The model used in the study is a three-dimensional finite element model that is designed using a combination of SolidWorks and ANSYS workflow. Clamped-free boundary conditions are …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 258–274 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Enhancement in Biomedical Polymer Nanocomposites: Biocompatibility and Mechanical Property Predictions using Machine Learning
Abstract: A machine learning (ML)-based framework is developed and validated through experimental analysis and comparative modeling to enhance system dependability and improve prediction performance. The proposed framework includes key stages such as data preprocessing, feature evaluation, model training, and performance benchmarking to determine the most effective prediction technique. Several machine learning models were evaluated, including Ensemble models, Artificial Neural Networks (ANN), Decision Tree (DT), Random Forest (RF), Support Vector Machine (SVM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 275–296 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Recent Advancements in Nanobiocomposite-Based Wound Healing and Tissue Regeneration
Abstract: Haemostasis, inflammation, proliferation, remodeling, and other highly coordinated cellular and molecular activities are all part of the complex biological processes of wound healing and tissue regeneration. Following an injury, these stages cooperate to restore tissue integrity and function. However, this normal process is disturbed in many clinical circumstances, especially chronic wounds such diabetic ulcers, burns, and pressure sores. Prolonged inflammation, chronic microbial infection, diminished angiogenesis, and impaired extracellular matrix production …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 297–318 Read article
-
Predicting Dielectric Constants of Polymers Using Molecular Structural Descriptors and Explainable Machine Learning: A Data-Driven Approach
Abstract: Accurate prediction of dielectric constants in polymeric materials is fundamental to the rational design of advanced electronic components, energy storage capacitors, flexible substrates, and high-frequency communication circuits. Conventional approaches to identifying suitable polymer dielectrics rely on extensive experimental synthesis and characterisation, which are both time-consuming and resource-intensive. In this work, an explainable machine learning framework is developed to predict the dielectric constant of polymers directly from molecular structural descriptors derived …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 297–304 Read article
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Structure Property Correlation of Polymer Dielectrics Using Electrical Response Data
Abstract: Polymer dielectrics are foundational to insulation, capacitors, embedded passives, and flexible electronics, where performance is governed by the frequency-dependent electrical response rather than a single dielectric constant. This study presents a spectroscopy-aware structure–property correlation framework that transforms dielectric response data into physically interpretable spectral fingerprints and learns mappings from polymer descriptors to these fingerprints for prediction and interpretation. Broadband spectra are standardized on a log-frequency grid and parameterized using relaxation-informed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 315–324 Read article
-
Sustainability Driven Marketing in the Polymer Composites Sector: Green Positioning and Circular Economy Strategies
Abstract: Marketing strategies have progressively shifted toward sustainability, fundamentally transforming the polymer composites sector. Green positioning focuses on showcasing a product’s environmental advantages, whereas circular economy strategies emphasize reuse, recycling, and waste reduction. These approaches have gained considerable interest amid rising consumer demand for eco-conscious products and stricter environmental regulations. Sustainable polymer composites contribute to lower carbon emissions and improved resource management. Such materials are particularly valuable in sectors where ecological …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 319–330 Read article
-
Sustainable Polymer-Based Cementitious Composites with Granite Dust as Fine Aggregate: Strength and Durability Evaluation
Abstract: This study investigates the potential for creating a new kind of cementitious composites that is obtained through the different compositions of rocks and chemicals in which granite dust that is helpful in resistance of chloride penetration and heat of hydration as a substitution with sand in composite. The primary goal of this study focuses on the effect of the stone waste like polymer matrix on evidence bases of researches for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 325–339 Read article
-
Fabrication and Comparative Study of Synthetic and Eggshell Waste Derived Hydroxyapatite-Based Composites for Biomedical Applications
Abstract: Hydroxyapatite is widely used as a bioceramic material in orthopedic and dental field because of its exceptional biocompatibility and bioactivity. Hydroxyapatite (HAp) doped with several mineral ions has been frequently reported to further enhance its bioactive nature. Several studies indicate that biological waste materials can serve as calcium sources for hydroxyapatite synthesis, with eggshells being one such promising source. In the present work, two types of hydroxyapatite were synthesized: pure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 33–46 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Biopolymer-Based 3D Composite Scaffolds for Bone Tissue Engineering: Photothermal-Responsive Systems with Controlled Pt (IV) Prodrug Release
Abstract: Biopolymer-based composite scaffolds have attracted significant attention as multifunctional platforms at the intersection of polymer science, regenerative medicine, and cancer nanotherapy. In this study, a dual-functional scaffold was developed for simultaneous osteosarcoma treatment and bone regeneration using poly (L-lactic acid) (PLLA) reinforced with bioactive glass (BG) and integrated with a glutathione-responsive platinum (IV) prodrug system (PDA@Pt). To improve interfacial adhesion, photothermal conversion efficiency, and tumor-specific activation, the Pt (IV) prodrug …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 351–361 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Recycling and Reinforcement of Retired EV Battery Materials in Polymer Composites for Sustainable Engineering Applications
Abstract: The rapid proliferation of electric vehicles (EVs) has led to a substantial increase in lithium-ion battery waste, necessitating sustainable strategies for material recovery and reuse. This review explores the valorization of retired Electrical Vehicle batteries within polymer and composite systems, highlighting second-life applications as a promising pathway toward circular material utilization. Batteries retaining 70–80% of their original capacity remain suitable for extended use; however, beyond conventional energy storage, their constituent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 362–371 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Polymer Encapsulants for Photovoltaic Modules: Electrical Insulation Performance and Long-Term Durability under Accelerated UV Exposure
Abstract: Influence on the reliability and service life of PV modules is a major issue, which is influenced by the encapsulant degradation in long-term exposure to the sun's ultraviolet (UV) radiation. A systematic accelerated UV aging study of Ethylene Vinyl Acetate (EVA), Polyolefin Elastomer (POE), and Polyvinyl Butyral (PVB) films under IEC 61215-2:2021 specified test chamber conditions of Q-UV is conducted. The material properties were tested at various exposure intervals including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 384–408 Read article
-
Machine Learning Assisted Design and Analysis of Polymer Composite Materials for Sustainable Renewable Energy Systems
Abstract: Accurate prediction and optimization of polymer composite properties is of paramount importance in the design of these lightweight, durable, and sustainable materials within renewable energy technologies. This work will provide a holistic machine learning-assisted framework that unites materials informatics with domain-specific features and state-of-the-art ML methodologies in the prediction of the mechanical properties of polymer composites, such as tensile strength. This includes embedding several ensemble models, including Random Forest and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 391–402 Read article
-
Polymer-Based Acoustic Composite Materials for Urban Noise Mitigation: Design, Performance and Legal Integration
Abstract: This study explores the development and use of polymer-based acoustic composite materials for effective urban noise mitigation, wherein the performance of the materials is linked to legal compliance frameworks. Rapid urbanization has intensified noise pollution from transportation, industrial activity, and construction, posing a serious threat to public health and environmental quality. Although regulatory standards exist, their implementation is often limited due to inadequate technical interventions. This research focuses on advanced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 403–412 Read article
-
Hybrid Numerical–Artificial Neural Network Study of Chemically Reactive MHD Nanofluid Flow Incorporating Thompson–Troian Slip and Stefan Blowing
Abstract: Boundary layer behaviour in chemically reactive nanoliquid is significantly affected by surface conditions, magnetic fields, heat and mas transfer mechanisms. However, the combined impact of Stefan blowing and nonlinear Thompson–Troian slip under inclined magnetic fields remains mostly unexplored, particularly in mixed convection flows. In this research work, the flow of a chemically reactive nanoliquid over a permeable surface is investigated by considering the Troian slip, inclined magnetic fields, Stefan blowing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 409–425 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Automated Microstructure Classification with Class-Specific Segmentation for Titanium Based Composite Materials
Abstract: In engineering, characterisation of microstructure is required to determine and forecast behaviour of titanium alloys. Our proposal in this work has been a deep-learning-based framework in the automatic classification and segmentation of Titanium Based Composite Material. The framework then uses EfficientNetB0 backbone, where we have chosen the backbone to scale the performance of classification and the computational efficiency with the assistance of the transfer learning and the compound scaling. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 424–433 Read article
-
Optimized Utilization of Kota Stone Slurry Waste in Fly Ash–Based Geopolymer Mortar: A Taguchi-Driven Approach
Abstract: The large-scale generation of stone-processing wastes presents a critical sustainability challenge and an opportunity for value-added reuse in construction materials. This study develops a high-performance fly ash geopolymer mortar by partially replacing Class F fly ash with Kota stone slurry waste (KSSW) and optimizing the key mix parameters using a Taguchi design framework. Five governing factors—binder replacement level, NaOH molarity, sodium silicate–to–sodium hydroxide ratio (SS/SH), curing temperature, and alkaline solution-to-binder …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 426–445 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Cyber-Secure IoT Framework for Monitoring Fiber-Reinforced Polymer Composites Using Embedded Sensors
Abstract: The present research paper suggests a cyber-safe Internet of Things system in real-time monitoring of fiber-reinforced polymer composites with inbuilt sensors. It is aimed at enhancing structural health maintenance, using sensual, intelligent analysis, and data protection in the same platform. Multi-layer architecture An embedded sensor, signal processing, anomaly detection and lightweight layer of cyber-security are developed. Experimental validation is done under controlled conditions and the performance is measured by these …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 434–458 Read article
-
A Sustainable and Green Prototyping Framework for Low-carbon and Resource-efficient Virtual Product Development
Abstract: The increasing emphasis on sustainable manufacturing has intensified the need for environmentally responsible design and development methodologies for polymer and polymer-composite materials, where material selection, processing routes, and waste generation play a critical role in overall environmental impact. This paper presents a Sustainable and Green Prototyping (SGP) framework that integrates Virtual Prototyping (VP), Life Cycle Assessment (LCA), and multi-objective optimization to systematically reduce carbon footprint, energy consumption, and material waste …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 459–471 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Extraction and Characterization of Pectin from Malabar Tamarind, and Indian Wild Lime
Abstract: Pectin is a versatile heteropolysaccharide that is widely used in the food, pharmaceutical, and biomedical industries because of its gelling, stabilizing, and emulsifying properties. This review discusses the extraction of pectin from agro-waste peels of Malabar tamarind (Garcinia cambogia) and Indian wild lime (Citrus indica) using conventional acid hydrolysis under optimized conditions: pH 1.5–2.0, 85–90°C, and 90 minutes. The process resulted in 22.5% and 27.8% pectin yields, respectively, verified through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 472–478 Read article
-
Biopolymer Degradation and Structure–Property Relationships in Ageing: A Polymer Science Perspective
Abstract: Ageing, as viewed from the polymer sciences perspective, is perceived as the gradual modification of the structure-property-function interrelationship of biopolymers such as proteins, polysaccharides, nucleic acids and their molecular aggregates. Such changes include structural organization, mechanical behavior, physicochemical stability and functional effectiveness. Ageing is an inevitable multifactorial polymeric process. Due to the growing aging population globally, more age-associated complications emerge, which are correlated with the molecular degeneration of biopolymeric complexes. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 479–489 Read article
-
Polymer-Based Nanocomposite Coatings for Enhancing Solar Photovoltaic Panel Efficiency
Abstract: Environmental factors such as dust deposition, ultraviolet (UV) radiation, and surface reflection significantly reduce the performance of solar photovoltaic (PV) modules. This study investigates the development and performance evaluation of polymer-based nanocomposite coatings designed to improve the optical and surface properties of PV panel glass. A hybrid nanocomposite coating containing TiO₂ and SiO₂ nanoparticles dispersed in a polymethyl methacrylate (PMMA) matrix was synthesized using the sol–gel technique and deposited through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 490–497 Read article
-
Fabrication and Mechanical Characterization of Hybrid Natural Fiber Reinforced Composites using Ferromagnetic and Graphite Fillers
Abstract: The past few years have seen a lot of interest in the creation of hybrid natural fiber composites because of their lightweight properties, environmental friendliness and their potential use in structures. The hybrid composite laminates in the current study were produced by the hand lay-up process by blending the natural fibers with the functional filler materials. Three types of composite structures were created and these are Natural Composite Material (NCM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 498–511 Read article
-
Development and Characterization of Rubber Composites using E-Waste Residue as Functional Filler
Abstract: In the present study, residue generated during the recycling of end-of-life printed circuit boards (PCBs) was utilized as a functional filler in natural rubber to fabricate eco-friendly composites using mixing and molding techniques. Chemical analysis of the residue revealed the presence of several metals, including copper, iron, lead, tin, and zinc. The presence of these metals highlights the need for proper recycling and safe management of PCB residues, as their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 512–523 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article
-
Natural Frequency Analysis of Polymer Composites
Abstract: Polymer composite materials are increasingly utilized in vibration-sensitive engineering applications due to their high strength-to-weight ratio, design flexibility, and tailorable dynamic properties. Among these properties, natural frequency plays a crucial role in determining structural stability, resonance avoidance, and dynamic performance. This review presents a comprehensive synthesis of recent research on the natural frequency characteristics of polymer composite structures, with emphasis on material properties, structural configurations, boundary conditions, damage effects, environmental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 541–553 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
Cognitive AI-Based Quality Control and Operational Optimization of Polymer Composites for Healthcare Applications
Abstract: The use of polymer composite materials in healthcare is on the rise because of their adjustable mechanical characteristics, biocompatibility and structural flexibility. Yet, it is difficult to ensure stable quality of such composites due to process-related defects, heterogeneity of the material and the lack of real-time adaptive control. The proposed study suggests the use of cognitive AI-based framework of quality control and optimization of operation of polymer composite systems which …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 571–591 Read article
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
A Hybrid model of ResNet50 integrated U-Net for image Denoising for Polymer and Composite Microstructure Analysis
Abstract: In digital era a high-quality imaging plays a very important role in polymer and composite material characterization features such as fiber-matrix interfaces, voids, microcracks cause problems in mechanical and functional properties. Polymer imaging includes optical microscopy and scanning electron microscopy, due to sensor limitation, environmental conditions add noise to the image and reduce quality of image. The noise degrades image quality, and it leads to reduce reliability in material analysis. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 592–602 Read article
-
Critical Review on Multifunctional Polymer Composites for Weight Reduction and AI Based Battery Thermal Management in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for advanced materials and intelligent control systems capable of improving energy efficiency, driving range, thermal safety, and overall vehicle sustainability. This paper presents a critical review of multifunctional polymer composites and artificial intelligence-based battery thermal management systems (AI-BTMS) for next-generation EV applications. Polymer composites reinforced with carbon fibers, graphene, boron nitride, nanoclays, and carbon nanotubes offer significant advantages over …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 603–619 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Dual Nozzle 3D Printing of Basalt Fiber–Reinforced Polymer Composites
Abstract: Additive manufacturing or 3Dprinting involves building a three-dimensional object by layering materials based on a computer-created design. Generally, 3D printing using single nozzle process where as strength, quality, wastage, and post reinforcement are drawback of this system. To eliminate and to enhance strength, precise control of fiber reinforcement, good bonding, no need of secondary reinforcement the dual nozzle 3D printing is an emerging additive manufacturing technique. In this process the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 620–630 Read article
-
Explainable Machine Learning Integrated with Polymer-Based Diagnostic Technologies for Liver Health Classification
Abstract: Early and reliable assessment of liver health is essential for timely treatment, yet most machine-learning approaches face limitations such as class imbalance and low clinical interpretability. This study proposes a polymer-integrated, explainable machine-learning framework that combines SMOTE-based data balancing, Logistic Regression, and XAI techniques (SHAP and LIME) for transparent liver-health classification. In addition to ML modelling, the study emphasizes the emerging role of polymer-based biosensors, microfluidic polymer chips, polymer nanomaterials, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 631–643 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
IoT-Enabled Self-Monitoring Polymer Composites for Solar Facade Systems with Cloud-Based Thermal Analytics
Abstract: The increasing demand for intelligent and energy-efficient building systems has hastened the production of smart solar facade systems. This paper presents an IoT-based self-monitoring polymer composite system, which includes thermal analytics running on the cloud to provide real-time assessments of the performance of the facade. The artificial composite panel has sensing capability built in which the material is able to measure both surface and internal thermal behavior simultaneously in dynamic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 657–681 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Structural Optimization of FDM-Processed ASA Polymer Frames through Acetone Solvent Welding, Variable Infill Strategy, and Layer Orientation: Experimental Validation via Quadcopter Flight Testing
Abstract: Acrylonitrile styrene acrylate (ASA) is an amorphous terpolymer with superior UV resistance compared to acrylonitrile butadiene styrene (ABS), as its acrylate rubber phase lacks photodegradation-prone carbon–carbon double bonds. This study proposes acetone solvent welding as a polymer joining method to produce monolithic structures from FDM-processed ASA components, addressing three processing challenges: achieving structural continuity through polymer chain interdiffusion at solvent-wetted interfaces, correcting thermal warping via post-print geometric correction during welding, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 689–703 Read article
-
AI-Driven Prediction of Mechanical and Thermal Properties in Polymer-Based Functionally Graded Composites
Abstract: The proposed architecture of the current paper is an artificial intelligence (AI)-driven model of forecasting mechanical and thermal aspects of polymer-based functionally-graded composites (FGCs). Traditional micromechanical and finite element models, which are practical in homogeneous composites, might not be able to account in nonlinear interaction that is caused by compositional gradient. To overcome the challenge, machine learning (ML) models like artificial neural network (ANN), support vectors regression (SVR), and gradient-boosted …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 70–89 Read article
-
Advancements In Energy Storage Materials Are Overcoming Challenges and Shaping Future Innovations
Abstract: The pursuit of efficient energy storage technologies is critical for advancing renewable energy systems and improving the performance of electric vehicles. This review emphasizes the synergistic contributions of polymers and composite materials in phase change materials (PCMs), zinc-based batteries (ZnBs), lithium-ion batteries (LIBs), and graphene-based systems. PCMs, particularly polymer-encapsulated and polymer-stabilized composites, demonstrate a remarkable ability to store and release thermal energy, enabling improved thermal management and operational stability. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 704–723 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Machine Learning-Based Quantification of Polymer Structure Property Relationships for Predictive Material Design
Abstract: Polymer structures exhibit complex, hierarchical arrangements that strongly influence macroscopic properties, yet consistent quantification remains challenging due to nonlinear interactions and limited unified modeling strategies. Existing approaches inadequately capture generalized structure–property mappings across diverse polymer systems. This research aims to establish a machine learning-based quantification model for polymer structure–property relationships to support predictive material design. A Polymer Structure Property Dataset of 5,000 polymer samples includes structural descriptors and experimentally measured …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 737–754 Read article
-
Development of Neuromorphic Polymer Composites Using IoT Sensing and Brain-Inspired Learning Algorithms
Abstract: This research aims to develop neuromorphic polymer composites by combining conductive sensing materials, IoT-based sensing data collection and brain-inspired learning models for adaptive response. Hybrid conductive polymer composites were developed by adding carbon nanofibers and graphene Nano platelets to a thermoplastic polymer. IoT sensors (strain, temperature) were employed to collect real-time sensing data that was combined with environmental data. A material-aware neuromorphic learning algorithm was created with event-driven spike coding …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 755–784 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Noise and Vibration Reduction Using Sustainable Polymer Nanocomposite Materials: A Review
Abstract: Noise pollution and structural vibration represent critical challenges in modern engineering systems, affecting human health, operational efficiency, and equipment durability. This review examines the application of sustainable polymer nanocomposite materials for simultaneous noise and vibration reduction across diverse engineering domains. The fundamental relationship between structural vibration and noise generation is established, followed by a comprehensive analysis of sound absorption and damping mechanisms in nanoparticle-reinforced polymer systems. Multi-walled carbon nanotubes (MWCNTs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 785–798 Read article
-
Performance and Exergy Loss Analysis for a Single Slope Solar Still Using PMMA
Abstract: A solar still constructed using polymethyl methacrylate (PMMA) represents an improved approach to solar desalination, in which conventional materials such as metal or concrete are substituted or reinforced with PMMA- based composites PMMA sheets are often used as the transparent glazing cover of the solar still instead of glass. It allows maximum solar radiation to pass into the basin, heating the saline/brackish water effectively. A tubular solar still made from …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 799–807 Read article
-
Design and Performance Evaluation of PLA-based Umbrella Wheels for Stair-Climbing Robotic Applications
Abstract: Staircase climbing robots require a complex design capable of navigating various stair configurations. A crucial component of such robots is the wheel mechanism. This paper focuses on the umbrella wheel mechanism and its application in staircase climbing robots. In this study, a PLA–based umbrella wheel structure is developed and fabricated using fused deposition modeling (FDM) for application in stair-climbing robots. The umbrella wheel geometry enables transformation from a circular rolling …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 808–824 Read article
-
Mathematical Modelling and Experimental Analysis of a 3D Printed PLA UAV Propeller using NACA 4412 Airfoil
Abstract: The usage of unmanned aerial vehicles (UAVs) has grown significantly because they are cost-effective and easy to availability for many applications. However, researchers have focused on the designing for various UAV propeller/rotors geometries, including their aerodynamic performance and structural examination. An elegant, designed propeller can enhance the UAV's endurance limit and its reliability. This research focuses on designing of UAV propeller and its fabrication using Polylactic acid (PLA) material using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 825–832 Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
Synthesis of Zinc Oxide Nanoparticles Through Polymeric Precursor Route and their Integration into Functional Nanocomposites
Abstract: A polymer precursor approach for creating zinc oxide (ZnO) nanoparticles with regulated size and shape is described in this work. By stabilising and capping particles, the polymer-assisted pathway efficiently reduces particle agglomeration while facilitating controlled nucleation and growth. The surface shape and dispersion of the produced ZnO nanoparticles were assessed using the scanning electron microscopy (SEM). When compared to traditional synthesis techniques, the addition of polymer greatly enhanced surface homogeneity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 883–890 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Impact of Mould Material on Microstructure and Mechanical Properties of Aluminium Castings: A Comparative Study with Aluminium Matrix Composites
Abstract: Casting has a wide industrial usage because it allows manufacturing complicated forms even at a comparatively low cost. Issues like transfer of heat through the interface of the mould and the metals, the rate of solidification, and the characteristics of the mould material have a powerful impact on the quality of cast products. This study measures the influence of various mould substances on the mechanical characteristics of aluminium castings. Sand, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 9–18 Read article
-
A Low-Cost Multi-Sensor IoT System for Real-Time Segregation of Polymer Waste
Abstract: Segregation of solid waste is a critical aspect of waste management, especially in settings where technical and financial constraints limit the adoption of sophisticated technologies. The proposed low cost, sensor-driven smart waste sorting system combines a variety of sensing technologies with an integrated decision-making system. The system employs an inductive sensor, moisture sensor and capacitive sensor to measure the physical properties of waste items, allowing segregation into metal, wet and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–`107 Read article
-
Structure-Property Correlation in PTT/PP Blends with Improved Mechanical Performance
Abstract: The present work investigates a series of poly (trimethylene terephthalate) (PTT)/polypropylene (PP) blends prepared with varying PP concentrations in order to improve the overall performance of PTT, particularly with respect to mechanical properties and processability. PTT is a promising engineering thermoplastic owing to its balanced stiffness, resilience, and chemical resistance; however, its relatively high cost and processing limitations often restrict its wider application. In this context, blending with PP offers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 90–98 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
A Comprehensive Survey of Polymer Detection Techniques and Computer-Based Analysis Methods for Advanced Material Characterization
Abstract: Polymers are widely used in aerospace, automotive, biomedical, packaging, electronics, and manufacturing industries because of their lightweight nature, durability, and versatility. Accurate polymer identification and characterization are essential for quality control, recycling, performance assessment, and the development of advanced materials. Characterization helps determine important properties such as chemical composition, molecular structure, thermal stability, mechanical strength, and surface morphology, which influence material performance and application suitability. Traditional polymer detection methods include …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 921–929 Read article
-
A Review on Integrated Acoustic Emission and Piezoelectric Sensing for Real-Time Damage Characterization of Polymer Composite-Enhanced Concrete: Advances, Challenges, and Future Perspective
Abstract: Polymer composite reinforced concrete has been identified as an efficient material system that can enhance the mechanical properties, durability, and service life of modern structures. The combination of fiber reinforced polymers (FRPs), polymer modifiers, and hybrid composite reinforcements increases structural effectiveness. However, these systems are still vulnerable to damage processes, including matrix cracking, fiber breaking, interfacial debonding, and delamination. Thus, there is a need for structural health monitoring (SHM) strategies …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 930–939 Read article
-
Architectured Multiphase Polymeric Carriers with Microstructural Gradients: Synergistic Filler Effects for the Precision Delivery in Tuberous Plant Systems
Abstract: In this paper, 50 papers were reviewed to analyse the design, techniques, and applications of polymer composite systems for delivering agrochemicals against major tuberous plant pathogens, including fungi, bacteria, and nematodes. Primary tuber plant pathogens affecting yield are studied, followed by a study of control strategies. This is followed by a study of the basic properties of polymer composites, including the significance of natural and synthetic polymers. Then, the study …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 940–949 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Catalytic Performance Improvement in Polymer Derived Nanostructures for Fuel Cell Applications
Abstract: The performance and operational lifetime of PEMFCs are closely linked to the catalytic activity and durability of cathode electrocatalysts. In this research, a polymer-derived cobalt–iron nitrogen-doped carbon (CoFe–N/C) nanostructured catalyst is developed to enhance the ORR performance for PEMFC applications. PAN and melamine serve as nitrogen-rich polymer precursors, while cobalt and iron salts generate highly dispersed metal–nitrogen active sites within a porous carbon matrix through thermal treatment at 900 °C. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 968–979 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article