Journal of Polymer & Composites Original Research Special issue

Fabrication and Comparative Study of Synthetic and Eggshell Waste Derived Hydroxyapatite-Based Composites for Biomedical Applications

  1. Subhasis Nath Department of Mechanical Engineering, Central Tool Room and Training Center, Kolkata
  2. Sujan Krishna Samanta Department of Biomedical Engineering, Netaji Subhash Engineering College, Kolkata
  3. Sourav Debnath Department of Electrical Engineering, Brainware University, Barasat, Kolkata
  4. Soumya Mukherjee Department of Metallurgical Engineering, Kazi Nazrul University, Asansol, Paschim Bardhaman

Abstract

Hydroxyapatite is widely used as a bioceramic material in orthopedic and dental field because of its exceptional biocompatibility and bioactivity. Hydroxyapatite (HAp) doped with several mineral ions has been frequently reported to further enhance its bioactive nature. Several studies indicate that biological waste materials can serve as calcium sources for hydroxyapatite synthesis, with eggshells being one such promising source. In the present work, two types of hydroxyapatite were synthesized: pure hydroxyapatite and 5% magnesium-doped hydroxyapatite (based on weight percentage). Laboratory-grade calcium hydroxide was used for synthetic HAp, while eggshell powder was employed for eggshell-derived HAp. The activity of the developed materials in biological environment was assessed using in vitro methods. Porous ceramic blocks were fabricated by compacting the powders using a hydraulic press and sintering them at 950°C. Powder samples calcined at 800°C were analysed by X-ray diffraction (XRD) to assess the lattice parameters and functional groups identification was done by Fourier transform infrared spectroscopy (FTIR) to identify. Apparent porosity was determined using Archimedes’ principle, confirming the presence of pores in the pellets. Hemolysis studies demonstrated that the synthesized materials are hemocompatible. Simulated body fluid (SBF) studies confirmed the appearance of apatite layer on the sintered pellets, establishing the bioactive and interactive nature of the developed materials.

Keywords

References (44)

  1. Ayrilmis N, Kanat G, Yildiz Avsar E, Palanisamy S, Ashori A. Utilizing waste manhole covers and fibreboard as reinforcing fillers for thermoplastic composites. Journal of Reinforced Plastics and Composites. 2024;44(17-18):1108-1118. doi:10.1177/07316844241238507
  2. Mylsamy B, Aruchamy K, Marudhamuthu Shanmugam SK, Palanisamy S, Ayrilmis N. Improving performance of composites: Natural and synthetic fibre hybridisation techniques in composite materials – A review. Materials Chemistry and Physics. 2025;334:130439. doi:10.1016/j.matchemphys.2025.130439
  3. Palaniappan M, Palanisamy S, Murugesan TM, Tadepalli S, Khan R, Ataya S, et al. Influence of washing with sodium lauryl sulphate (SLS) surfactant on different properties of ramie fibres. BioResources. 2024;19(2):2609-2625. doi:10.15376/biores.19.2.2609-2625
  4. Manickaraj K, Thirumalaisamy R, Palanisamy S, Ayrilmis N, Massoud EES, Palaniappan M, et al. Value‐added utilization of agricultural wastes in biocomposite production: Characteristics and applications. Annals of the New York Academy of Sciences. 2025;1549(1):72-91. doi:10.1111/nyas.15368
  5. Palanisamy S, Kalimuthu M, Dharmalingam S, Alavudeen A, Nagarajan R, Ismail SO, et al. Effects of fiber loadings and lengths on mechanical properties of Sansevieria Cylindrica fiber reinforced natural rubber biocomposites. Materials Research Express. 2023;10(8):085503. doi:10.1088/2053-1591/acefb0
  6. Ramasubbu R, Kayambu A, Palanisamy S, Ayrilmis N. Mechanical properties of epoxy composites reinforced with Areca catechu fibers containing silicon carbide. BioResources. 2024;19(2):2353-2370. doi:10.15376/biores.19.2.2353-2370
  7. Henkel J, Woodruff MA, Epari DR, Steck R, Glatt V, Dickinson IC, et al. Bone Regeneration Based on Tissue Engineering Conceptions — A 21st Century Perspective. Bone Research. 2013;1(3):216-248. doi:10.4248/br201303002
  8. Narasaraju TSB, Phebe DE. Some physico-chemical aspects of hydroxylapatite. Journal of Materials Science. 1996;31(1):1-21. doi:10.1007/bf00355120
  9. Shackelford JF. Bioceramics - Current Status and Future Trends. Materials Science Forum. 1998;293:99-0. doi:10.4028/www.scientific.net/msf.293.99" rel="nofollow">doi:10.4028/www.scientific.net/msf.293.99
  10. Santos MH, Oliveira MD, Souza LPDF, Mansur HS, Vasconcelos WL. Synthesis control and characterization of hydroxyapatite prepared by wet precipitation process. Materials Research. 2004;7(4):625-630. doi:10.1590/s1516-14392004000400017
  11. Nasiri-Tabrizi B, Honarmandi P, Ebrahimi-Kahrizsangi R, Honarmandi P. Synthesis of nanosize single-crystal hydroxyapatite via mechanochemical method. Materials Letters. 2009;63(5):543-546. doi:10.1016/j.matlet.2008.11.030
  12. Borello, A. Deptuła, W. Łada, T. Olczak, C. Alvani, A. Di Bartolomeo, NON-CRYSTALLINE SOLIDS Preparation of spherical powders of hydroxyapatite, Journal of Non-Crystalline Solids. 148 (1992) 537–541.
  13. Pramanik S, Agarwal AK, Rai KN, Garg A. Development of high strength hydroxyapatite by solid-state-sintering process. Ceramics International. 2007;33(3):419-426. doi:10.1016/j.ceramint.2005.10.025
  14. Sampath Kumar TS, Manjubala I, Gunasekaran J. Synthesis of carbonated calcium phosphate ceramics using microwave irradiation. Biomaterials. 2000;21(16):1623-1629. doi:10.1016/s0142-9612(00)00014-4
  15. Liu HS, Chin TS, Lai LS, Chiu SY, Chung KH, Chang CS, et al. Hydroxyapatite synthesized by a simplified hydrothermal method. Ceramics International. 1997;23(1):19-25. doi:10.1016/0272-8842(95)00135-2
  16. Webster TJ, Massa-Schlueter EA, Smith JL, Slamovich EB. Osteoblast response to hydroxyapatite doped with divalent and trivalent cations. Biomaterials. 2004;25(11):2111-2121. doi:10.1016/j.biomaterials.2003.09.001
  17. Murugan N, Murugan C, Sundramoorthy AK. In vitro and in vivo characterization of mineralized hydroxyapatite/polycaprolactone-graphene oxide based bioactive multifunctional coating on Ti alloy for bone implant applications. Arabian Journal of Chemistry. 2018;11(6):959-969. doi:10.1016/j.arabjc.2018.03.020
  18. Cacciotti I, Bianco A, Lombardi M, Montanaro L. Mg-substituted hydroxyapatite nanopowders: Synthesis, thermal stability and sintering behaviour. Journal of the European Ceramic Society. 2009;29(14):2969-2978. doi:10.1016/j.jeurceramsoc.2009.04.038
  19. Bigi A, Falini G, Foresti E, Ripamonti A, Gazzano M, Roveri N. Magnesium influence on hydroxyapatite crystallization. Journal of Inorganic Biochemistry. 1993;49(1):69-78. doi:10.1016/0162-0134(93)80049-f
  20. Landi E, Tampieri A, Mattioli-Belmonte M, Celotti G, Sandri M, Gigante A, et al. Biomimetic Mg- and Mg,CO3-substituted hydroxyapatites: synthesis characterization and in vitro behaviour. Journal of the European Ceramic Society. 2006;26(13):2593-2601. doi:10.1016/j.jeurceramsoc.2005.06.040
  21. Kolmas J, Jaklewicz A, Zima A, Bućko M, Paszkiewicz Z, Lis J, et al. Incorporation of carbonate and magnesium ions into synthetic hydroxyapatite: The effect on physicochemical properties. Journal of Molecular Structure. 2011;987(1-3):40-50. doi:10.1016/j.molstruc.2010.11.058
  22. Landi E, Tampieri A, Celotti G, Sprio S. Densification behaviour and mechanisms of synthetic hydroxyapatites. Journal of the European Ceramic Society. 2000;20(14-15):2377-2387. doi:10.1016/s0955-2219(00)00154-0
  23. Yajing Y, Qiongqiong D, Yong H, Han S, Pang X. Magnesium substituted hydroxyapatite coating on titanium with nanotublar TiO2 intermediate layer via electrochemical deposition. Applied Surface Science. 2014;305:77-85. doi:10.1016/j.apsusc.2014.02.163
  24. M. Serre, M. Papillard, P. Chavassieux, J.C. Voegel, G. Boivin, Influence of magnesium substitution on a collagen–apatite biomaterial on the production of a calcifying matrix by human osteoblasts., Journal of Biomedical Materials Research. 42 (1998) 626–633. https://doi.org/10.1002/(sici)1097-4636(19981215)42:43.3.co;2-j.
  25. Mehrjoo M, Javadpour J, Shokrgozar MA, Farokhi M, Javadian S, Bonakdar S. Effect of magnesium substitution on structural and biological properties of synthetic hydroxyapatite powder. Materials Express. 2015;5(1):41-48. doi:10.1166/mex.2015.1205
  26. Jones JE, Schwartz R, Krook L. Calcium homeostasis and bone pathology in magnesium deficient rats. Calcified Tissue International. 1980;31(1):231-238. doi:10.1007/bf02407186
  27. Landi E, Logroscino G, Proietti L, Tampieri A, Sandri M, Sprio S. Biomimetic Mg-substituted hydroxyapatite: from synthesis to in vivo behaviour. Journal of Materials Science: Materials in Medicine. 2007;19(1):239-247. doi:10.1007/s10856-006-0032-y
  28. Milovac D, Gamboa-Martínez TC, Ivankovic M, Gallego Ferrer G, Ivankovic H. PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: In vitro cell culture studies. Materials Science and Engineering: C. 2014;42:264-272. doi:10.1016/j.msec.2014.05.034
  29. Akram M, Ahmed R, Shakir I, Ibrahim WAW, Hussain R. Extracting hydroxyapatite and its precursors from natural resources. Journal of Materials Science. 2013;49(4):1461-1475. doi:10.1007/s10853-013-7864-x
  30. Ruksudjarit A, Pengpat K, Rujijanagul G, Tunkasiri T. Synthesis and characterization of nanocrystalline hydroxyapatite from natural bovine bone. Current Applied Physics. 2008;8(3-4):270-272. doi:10.1016/j.cap.2007.10.076
  31. Sang Cho J, Um SH, Su Yoo D, Chung YC, Hye Chung S, Lee JC, et al. Enhanced osteoconductivity of sodium‐substituted hydroxyapatite by system instability. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2013;102(5):1046-1062. doi:10.1002/jbm.b.33087
  32. Rahavi SS, Ghaderi O, Monshi A, Fathi MH. A comparative study on physicochemical properties of hydroxyapatite powders derived from natural and synthetic sources. Russian Journal of Non-Ferrous Metals. 2017;58(3):276-286. doi:10.3103/s1067821217030178
  33. Jaber HL, Hammood AS, Parvin N. Synthesis and characterization of hydroxyapatite powder from natural Camelus bone. Journal of the Australian Ceramic Society. 2017;54(1):1-10. doi:10.1007/s41779-017-0120-0
  34. Janus AM, Faryna M, Haberko K, Rakowska A, Panz T. Chemical and microstructural characterization of natural hydroxyapatite derived from pig bones. Microchimica Acta. 2007;161(3-4):349-353. doi:10.1007/s00604-007-0864-2
  35. Ofudje EA, Rajendran A, Adeogun AI, Idowu MA, Kareem SO, Pattanayak DK. Synthesis of organic derived hydroxyapatite scaffold from pig bone waste for tissue engineering applications. Advanced Powder Technology. 2018;29(1):1-8. doi:10.1016/j.apt.2017.09.008
  36. Pal A, Paul S, Choudhury AR, Balla VK, Das M, Sinha A. Synthesis of hydroxyapatite from Lates calcarifer fish bone for biomedical applications. Materials Letters. 2017;203:89-92. doi:10.1016/j.matlet.2017.05.103
  37. Murugan R, Ramakrishna S. Crystallographic Study of Hydroxyapatite Bioceramics Derived from Various Sources. Crystal Growth & Design. 2004;5(1):111-112. doi:10.1021/cg034227s
  38. Ho WF, Hsu HC, Hsu SK, Hung CW, Wu SC. Calcium phosphate bioceramics synthesized from eggshell powders through a solid state reaction. Ceramics International. 2013;39(6):6467-6473. doi:10.1016/j.ceramint.2013.01.076
  39. Shi, H. Ke, J. Xie, H. Tan, G. Luo, B. Xu, G. Abakari, Jo u pr oo f, Geoderma Regional. (2020) e00484. https://doi.org/10.1016/j.algal.2023.103165.
  40. Dupoirieux L, Pourquier D, Souyris F. Powdered eggshell: a pilot study on a new bone substitute for use in maxillofacial surgery. Journal of Cranio-Maxillofacial Surgery. 1995;23(3):187-194. doi:10.1016/s1010-5182(05)80009-5
  41. Sasikumar, R. Vijayaraghavan, Low temperature synthesis of nanocrystalline hydroxyapatite from egg shells by combustion method, Trends in Biomaterials and Artificial Organs. 19 (2006) 70–73.
  42. Anushika, Sharma P, Trivedi A, Begam H. Synthesis and characterization of pure and titania doped hydroxyapatite. Materials Today: Proceedings. 2019;16:302-307. doi:10.1016/j.matpr.2019.05.094
  43. Kokubo T, Takadama H. How useful is SBF in predicting in vivo bone bioactivity? Biomaterials. 2006;27(15):2907-2915. doi:10.1016/j.biomaterials.2006.01.017
  44. F04 Committee. Practice for Assessment of Hemolytic Properties of Materials. doi:10.1520/f0756-13
Support