Search
462 articles for “Power System Simulation”
-
Simulation of Electric Vehicles DC Engine Performance
Abstract: This works develops a simulation model to predict the performance of direct current electric motors for electric vehicles (EV), mainly focused on the required power and mechanical torque as a function of the driving conditions. The simulation, therefore, has been based on the dynamic conditions of the electric vehicle to reproduce the current driving in urban routes or intercity travels. The model has been applied to synchronous and asynchronous transmission …
Published in Journal of Automobile Engineering and Applications Read article
-
Power Factor Improvement of Boost PFC Converter for Street Light Application
Abstract: Street lighting is an integral part of urban infrastructure, ensuring public safety and urban development. The conventional street lighting systems often exhibit poor power factor characteristics, leading to inefficient energy usage and increased electricity costs. This paper presents a study focused on enhancing the power factor of a Boost Power Factor Correction (PFC) converter tailored specifically for street light applications. The Light Emitting Diode (LED) streetlights powered by AC sources …
Published in Journal of Power Electronics and Power Systems · Vol. 13, Issue 2, 2023 · pp. 12–18 Read article
-
Current Controlled Oscillator Using FinFET
Abstract: A current-controlled oscillator using 18 nm FinFET technology is proposed in this study which consists of a Current Controlled Differential Difference Current Conveyor (CCDDCC) block to control the current. FinFET technology has better scalability and lower leakage current compared to traditional CMOS, which allows it to surpass the obstacles faced by CMOS-based oscillators. The suggested oscillator is suitable for electronic applications such as Phase-Locked Loop (PLL) systems, radio frequency (RF) …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 3, 2025 · pp. 17–28 Read article
-
Design of Slew Aware Clock Distribution Network for Ultra Low Power Sub-threshold Applications
Abstract: Clock distribution network consumes significant amount of power due to its high switching activity. The high power consumption issue can be satisfactorily addressed by the sub-threshold operation of device, however at the cost of degraded performance and magnified variability. This paper investigates the suitability of conventional clock distribution network for sub-threshold regime and proposes a novel strategy of having an optimized uniform H-tree with a pair of buffer only at …
Published in Journal of VLSI Design Tools and Technology · Vol. 9, Issue 1, 2019 · pp. 22–37 Read article
-
Advanced Laser Technology for Curing Cancer Affected Melanoma-Cell
Abstract: In this paper we report the results about the study and experimental usage of a cancer curing laser equipment. Cancer can be detected using laser induced ultrasound .This device could scan a lymph node biopsy with laser pulses, whereby the pigment of melanin which is present in each and every cells reacts to the laser's beam, absorbing the light, and heating and cooling rapidly. This produces a popping sound that's …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 1–5 Read article
-
Securix: An Open-Source Security-based Linux Distribution for Novice Cyber Security Enthusiasts
Abstract: In the ever-evolving field of cybersecurity, the need for accessible and user-friendly tools in favor of beginner users has never been greater. The existing ethical hacking-related operating systems, while powerful, often overwhelm beginners with their complexity. The main objective of this project is to bridge the gap by providing an operating system for novice cyber enthusiasts looking to explore the world of ethical hacking and security. The proposed operating system …
Published in Journal of Open Source Developments · Vol. 11, Issue 3, 2024 · pp. 1–6 Read article
-
The Digital Frontier: How Computers Are Shaping the Future of Space Exploration
Abstract: The integration of computers and space technology has revolutionized the way we explore and understand space. Advanced computing systems play a pivotal role in space missions, from spacecraft navigation and communication to data processing and analysis. These technologies enable accurate modelling, simulation, and mission planning, allowing scientists and engineers to overcome the challenges of space exploration. Computers have also facilitated innovations such as artificial intelligence in autonomous spacecraft and real-time …
Published in International Journal of Satellite Remote Sensing · Vol. 3, Issue 1, 2025 · pp. 1–10 Read article
-
Design and Simulation of Full Adder-Based CMOS 4-2 Compressor using CMOS XOR-XNOR Logic
Abstract: This study utilizes the recent development of CMOS transistors to construct an energy-efficient Full adder-based CMOS 4-2 compressor. The CMOS Exclusive-OR-Exclusive-NOR component and multiplexer used in the transmission logic of the novel CMOS compressor include eight transistors. The XOR-XNOR logic style is the most efficient and effective due to its speed and reduced power consumption. Utilizing an operational supply voltage of 0.7 V and 90nm CMOS technology, the Cadence Virtuoso …
Published in Recent Trends in Electronics Communication Systems · Vol. 12, Issue 3, 2025 · pp. 1–8 Read article
-
Design and Simulation of Low Power Allow Area High Speed Carry Save Adder using CMOS 16 nm Technology.
Abstract: In this article, we propose a novel 1-bit hybrid full adder circuit that is implemented using eighteen transistors. Simulations are done using the Mentor Graphics Tool 16nm technologies. The performances are evaluated based on their speed, average power consumption, and power-delay product. The essential components of arithmetic units including compressors, comparators, parity checkers, etc. are full adders. Thus, raising the performance of the entire adder will raise the system's performance. …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 2, 2023 · pp. 17–28 Read article
-
1-Bit Full Adder's Analysis and Comparison
Abstract: The full adder circuit forms the basis of majority of digital circuits. Improvement in a basic full adder circuit in terms of area, power and delay affect the performance of whole system. It becomes compulsory to investigate and analyze the performance of implementation of full adder circuit in literature, till now. In this paper, a study is carried out to look into performance parameters of full adder circuit using different …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 2, 2015 · pp. 1–6 Read article
-
Performance Optimizing of a Simulated Model of a Fabry-Perot based Tunable Laser Operating at 1550 nm
Abstract: AbstractThe paper presents data for an optimized Fabry-Perot tunable laser, with a wavelength tuning range of 56.3 nm, with a high output power of 17.4307 dBm. Incentive for this research has been due to the cause that Fabry–Perot semiconductor laser diodes have been fine contenders as transmitters to be used in WDM optical networks. The proposed system is capable of modulating a maximum bit rate of 26.58 Gb/s, with an …
Published in Trends in Opto-electro & Optical Communication · Vol. 4, Issue 3, 2014 · pp. 23–31 Read article
-
Robust Access Control Mechanisms Using VHDL Programming for IoT Security
Abstract: The Internet of Things (IoT) devices are increasingly becoming targets for criminal actors. A compromised device can result in data breaches, denial-of-service attacks, and even physical damage. While software-based security solutions are important, they are susceptible to attacks and often impose significant overhead, negatively impacting both performance and battery life. A viable alternative is provided by hardware-based security, which takes advantage of the inherent security benefits that are associated with …
Published in Journal of VLSI Design Tools and Technology · Vol. 15, Issue 2, 2025 · pp. 6–1`9 Read article
-
Study of Energy Efficiency in IoT Devices
Abstract: The Internet of Things (IoT) is transforming industries and daily life by connecting billions of devices, yet its growth presents significant energy efficiency challenges. This paper explores strategies to address these challenges by investigating energy harvesting techniques and low-power communication protocols. Energy harvesting methods, including solar, kinetic, and thermal energy, offer sustainable alternatives to traditional battery-powered IoT devices, reducing dependency on non-renewable resources and enabling longer operational lifetimes. Simultaneously, low-power …
Published in Journal of Remote Sensing & GIS · Vol. 16, Issue 2, 2025 · pp. 34–40 Read article
-
Battery Energy Storage Optimization for Enabling Black Start in Offshore Wind Farms
Abstract: The transition toward power systems dominated by renewable energy sources (RES) introduces significant challenges to the provision of black start services. Black start units are essential for restoring power following a system-wide outage; however, the gradual retirement of conventional generation reduces the availability of such resources, potentially compromising grid resilience. Offshore wind farms (OWFs) are increasingly considered as viable alternatives for black start support. Nevertheless, their inherent variability and intermittent …
Published in Trends in Electrical Engineering · Vol. 16, Issue 2, 2025 · pp. 1–15 Read article
-
Breakdown Characteristics of Solid Insulating Materials for High Voltage Applications
Abstract: Electrical power systems are experiencing significant changes worldwide both in size and in complexities. Rapid growth of the power sector in the nation provides the opportunity to power engineer to design the power equipment which can with stand the high voltage and also provide reliability during their operating life. As the generating capacity of power plants have increased in recent time, application of high voltage has also intensively increased due …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 3, 2015 · pp. 17–24 Read article
-
Design and Analysis of Energy-Efficient GDI Cell and Its Impact on Multipliers
Abstract: VLSI design technology suffers from three major issues such as area, speed and power. Among these issues, power is a serious concern that is yet to be considered. So, in this paper, power is concerned more as compared to area and speed. GDI (gate diffusion input) is one of the common techniques used in VLSI design systems to reduce power consumption. Due to its high performance and less area overhead, …
Published in Journal of VLSI Design Tools and Technology · Vol. 4, Issue 2, 2014 · pp. 32–36 Read article
-
Polypyrrole-Based Conductive Polymer-Gated Single Electron Transistor with Deep Neural Network Assistance for Biomedical Energy Harvesting and Charge Detection
Abstract: The increasing demand for intelligent biomedical monitoring systems has accelerated research into ultra-low-power sensing technologies capable of operating with high sensitivity and minimal energy consumption. Conductive polymers have attracted considerable attention for biomedical and nanoelectronic applications due to their tunable electrical properties, biocompatibility, and environmental stability. Among them, Polypyrrole (PPy) is a promising functional polymer that can enhance charge transport and electrostatic coupling in nanoscale devices. In this work, a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
An Approach Towards Chatbot Using Speech Recognition
Abstract: Chatbot is software that, rather than facilitating direct interaction with a live human agent, conducts online conversations using text or text-to-speech. It is designed to accurately mimic human behavior during conversation. This paper presents a proposed chat system that dynamically responds to web-based customer queries. Speech recognition is the basis of the artificial intelligence used in the proposed system. The web-based platform provides a large intelligence base to help simulate …
Published in Journal of Advancements in Robotics · Vol. 11, Issue 1, 2024 · pp. 1–5 Read article
-
Fast Charging of Lithium-Ion Batteries Using a Full-Bridge Rectifier and Buck Converter with SOC Tracking
Abstract: This paper presents a simplified and cost-effective approach to electric vehicle (EV) fast charging by replacing the conventional neutral point clamped (NPC) converter with a full-bridge diode rectifier followed by a buck converter. The proposed topology is designed to deliver a regulated 80 V DC from a three-phase AC grid to charge a lithium-ion battery at a controlled current of 3 A. The converter design includes a three-phase diode bridge …
Published in Trends in Electrical Engineering · Vol. 15, Issue 2, 2025 · pp. 18–25 Read article
-
High Gain Observer and Moving Horizon Estimation for Parameters Estimation and Fault Detection of an Induction Machine: A Comparative Study
Abstract: The synthesis of a high gain observer (HGO) and moving horizon estimation (MHE) for the on-line estimation of the rotor fluxes, the rotor speed of the induction motor from the current and voltage measurements is presented. This paper presents two approaches for estimating the parameters of an induction machine during normal and faulty functionning. These approaches are based on the HGO and MHE. Simulation results show that we can identify …
Published in Journal of Control & Instrumentation · Vol. 8, Issue 2, 2017 · pp. 15–26 Read article