Search
41 articles for “nickel”
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
The Effect of Quicklime on The CBR Value of Soft Soil Stabilized with Nickel Slag and Aluminium Hydroxide
Abstract: The construction of road structures on soft soils is prone to structural damage due to the low bearing capacity of the soil under the load imposed by vehicles. Chemical stabilization is a popular method used to increase the bearing capacity of soft soils. This study aims to examine the effectiveness of soft soil stabilization using a mixture of lime, nickel slag, and aluminium hydroxide to enhance soil bearing capacity. The …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 1, 2025 · pp. 1–8 Read article
-
Dielectric Properties of Reduced Graphene Oxide with Nickel Cobalt Ferrite and Nickel Zinc Ferrite Epoxy Nanocomposites
Abstract: In this work, two systems of the composite were prepared using NiCoFe and NiZnFe with reduced graphene oxide(rGO) epoxy and the samples were subjected to electrochemical impedance spectroscopy (EIS). The Quality factor and loss tangent values of the composite was found out as a function of frequency. The modified ferrite-graphene-epoxy blends show dielectric loss and Quality factor values at low frequency. The incorporation of graphene aims to improve electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 11, 2023 · pp. 28–37 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Electroplating and Corrosion Properties of Binary and Ternary Zinc Alloys with Nickel, Cobalt and Iron
Abstract: The anti-corrosive three binary (Zn-Ni, Zn-Co, Zn-Fe) and two ternary (Zn-Ni-Co, Zn-Co-Fe) alloy coating films on mild steel from acid chloride bath using sulphanilic acid and gelatin as additives for the electroplating technique. The normal Hull cell method was used to optimize the bath compositions, temperature and pH of the bath solutions for coating performance against corrosion. The cause of current density (CD) on metal weight percentage (M = Ni, …
Published in Journal of Thin Films, Coating Science Technology & Application Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe3O4@ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe3O4@ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe3O4) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored onto the modified surface, resulting in a nanocatalyst …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 88–96 Read article
-
Synthesis of Magnetically Recoverable Nickel (II) Complex-Functionalized Fe 3 O 4 @ISNA (ISNA= Isonicotinic acid) Nanomaterials: Catalytic Studies on Nitrophenol Reduction and TD- DFT Studies
Abstract: In this study, we aimed to develop a novel, environmentally sustainable, and magnetically separable heterogeneous nanocatalyst, denoted as Fe 3 O 4 @ISNA@NiL (where L represents the ligand). The synthesis involved a two-step process, first, isonicotinic acid was chemically grafted onto the surface of iron oxide nanoparticles (Fe 3 O 4 ) to introduce functional groups capable of further chemical modification. Subsequently, a nickel(II) Schiff base monomeric complex was anchored …
Published in Journal of Polymer & Composites Read article
-
Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticles: Unification and Current–Voltage Relationship
Abstract: Polydimethylsiloxane (PDMS)–nickel nanoparticle (NiNPs) nanocomposite films were fabricated and systematically investigated to understand their electrical transport behavior through current–voltage (I–V) characterization. Nanocomposite films with varying Ni nanoparticle filler concentrations (14.88 wt%, 15.77 wt%, and 16.65 wt%) were prepared using a solution-mixing and spin-coating technique, followed by controlled thermal curing. The electrical properties of both pristine PDMS and PDMS– NiNPs nanocomposites were examined over a wide voltage range (up to 800 …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 22–29 Read article
-
Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature
Abstract: Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is due to its high hardness, fatigue strength, and chemical resistance. Nevertheless, the EN coverings' effectiveness at high temperatures, as well as their heat resistance, have yet to be evaluated. The current work investigates the tribological properties, namely friction and wear, of EN coatings at increased temperatures (100 ºC, 200 ºC, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 12–17 Read article
-
Performance and Structural Analysis of Different Lithium-Ion Battery Chemistries for Electric Vehicle Applications
Abstract: Lithium-ion batteries (LIBs) stand at the forefront of electric vehicle (EV) technology and have become a driving force behind the development of advanced energy storage systems. In this study, performance and structural analysis of different lithium-ion battery (LIB) chemistries—namely Lithium Nickel Manganese Cobalt Oxide (NMC), Lithium Iron Phosphate (LFP), Lithium Cobalt Oxide (LCO) and Lithium Nickel Cobalt Aluminum Oxide (NCA)—is presented. The study explores important performance parameters like energy density, …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 3, Issue 2, 2025 · pp. 13–31 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 Read article
-
Synthesis, Characterization and Antibacterial Evaluation of Novel Canola Oil-Based Poly-(Citrate/Succinate)-amide Incorporated with Zn (II) and Ni (II) Metal Ions
Abstract: This present research study is to fabricate efficient metal-incorporated Canola oil (CO) polymers synthesised using dicarboxylic acids – Citric acid (CA) and Succinic acid (SA). The research mainly highlights the fabrication of polymeric materials using CO via a safer chemical synthesis route with less toxic reactants and minimal solvent/diluent to accomplish sustainability, adopting the green chemistry principle. Divalent Zinc (Zn) and Nickel (Ni) were incorporated in the poly-(Citrate/Succinate)-amide matrix, Ni …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 45–69 Read article
-
Heavy Metal Exposure in Industrial Workers of Punjab
Abstract: Background: Particularly for those in sectors such textiles, metallurgy, and electronics, heavy metal exposure in industrial environments is a major health issue. A range of negative health effects can result from metal exposure including lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), and nickel (Ni), including neurological, pulmonary, and renal ones. There is little information available on the degree of heavy metal exposure industrial workers in Punjab, India experience. Objective: …
Published in Research and Reviews: A Journal of Toxicology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Enhancement of the Life of Helical Spring Systems
Abstract: Helical springs are essential mechanical factors considerably employed in automotive, aerospace, and artificial systems because of their capability to store and release energy, absorb shock, and sustain repeated weight cycles. The performance, responsibility, and durability of these springs play a vital part in ensuring the effectiveness and safety of the entire system in which they are integrated. Over time, numerous researchers have focused on strategies to enhance the service life …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 12–24 Read article
-
Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array
Abstract: Abstract Wire Arc Additive Manufacturing (WAAM) has gained significant attention in recent years as a promising technique for producing complex metallic components. This study focuses on the processing of Cu90Ni10 alloy using WAAM and employs an L9 orthogonal array to optimize the mechanical properties of the resulting components. Cu90Ni10 alloy is known for its excellent corrosion resistance and electrical conductivity, making it a critical material in various industries, including aerospace …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 292–301 Read article
-
An effort for maximizing the material removal rate during the wire cutting of difficult to machine Inconel X750 using electric discharge machining process
Abstract: The growing demand for harder materials with exceptional hardness poses a significant challenge for industries as achieving precise machining becomes increasingly tricky. The Inconel family of materials, renowned for their hardness, has been extensively studied. However, with the continuous introduction of new materials, the scope of research remains vast. In this context, Inconel X750, a corrosion and oxidation resistance, nickel-chromium-based alloy with excellent hardness, has gained attention. Despite its significance, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 1–17 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Heavy Metals Contamination in Groundwaters of Punjab: A Man-made Curse and its Mitigation
Abstract: The curse of heavy metal contamination in groundwaters of Punjab state is causing health hazards for the population of Punjab. It is not so much a natural disaster as its origin can be traced to a man-made crisis in Punjab. Potentially toxic elements, including high levels of Uranium (U) contamination in the Malwa belt of Punjab, Arsenic contamination in the Majha belt, and Selenium contamination in the Doaba belt of …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 6–22 Read article
-
Cobalt-Iron Sulfide and Cobalt Sulfide of Cobalt –III Dithiocarbamate Complexes Synthesis and Efficacy for Photocatalytic Dilapidation of Tints
Abstract: Dithio Carbamate compounds comprising pyrrole moiety which is a hetero cyclic fragrant Carbon- based composite for identifying of anions of Cobalt-III, Methyl Ferro Cenyl Sulfoxide and Nickel-II complexes were used as only basis originators on behalf of working out of Sulfide & Iron Sulfide of Cobalt atoms. Infrared spectral notes on nanoparticles endorse the occurrence of coating agent – Tri- ethylenetetramine. The exploration of nano particles by photo reagents to …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 1, 2024 · pp. 01–06 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article