Search
1131 articles for “system simulation”
-
Study of Two-distinct Automotive Bumper Beam Designs during Low Speed Impacts
Abstract: Bumper beam is one of the key components in the automotive bumper system, which plays an important role in crash as a protection for occupants and a car's frontal compartment by absorbing impact energy. The most critical parameters, including material, thickness, and shape and impact condition are studied in this paper for the design and analysis of an automotive front bumper beam to enhance the low-velocity impact crashworthiness design. Two …
Published in Journal of Automobile Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 16–28 Read article
-
Modeling Reaction Rate of Dispersion Coefficient and Oxygen Deficit on Nitrobacteria Transport in Onu-Imo River
Abstract: The migration rate of nitrobacteria in the Onu-Imo River was monitored based on some variables that determine the predictive model for such pollution transport. These parameters were factors applied in developing the derived model for the study. The variables were integrated into the system to monitor their various rates of impact on the transport process in the study environment. This was monitored by applying a one-dimensional flow transport system at …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 1, 2021 · pp. 28–41 Read article
-
Design and Implementation of Modular 3D LED Cube
Abstract: Abstract3D LED cube is a real 3D display that is built from many individual LEDs arranged in X, Y and Z axis. Because many LEDs are used these displays have complicated structure, electronic board and software. Different dimension (resolution) of this display are proposed and implemented, but these systems are non-modular, and we can’t develop their dimensions simply and quickly. In this paper, we propose three novel electronic modules for …
Published in Journal of Microcontroller Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 14–28 Read article
-
Harmonics Analysis of Single Phase VSI with 5-level and 7-level Inverter
Abstract: Abstract: The conventional two-level inverter is most commonly used for AC drive systems. The inverter produces harmonics, which will cause heating of the power electronic devices as well as load and deteriorate the life of it. Thus, anyhow harmonics should be suppressed or removed, the most common or well-known method to filter out harmonics are introduction of various filters between inverter and load according to requirements. The filters are mainly …
Published in Recent Trends in Electronics Communication Systems · Vol. 6, Issue 1, 2019 · pp. 16–23 Read article
-
Effect of Climate Change and Sea Level Rise Along the Coastline of Mumbai in 2050-using MIKE 21
Abstract: Sea-level rise being one of the most significant effects of climate change have grabbed the attention of the world. Although the exact forecast of rise of sea level remains uncertain, many projections for high emission scenarios from individual studies were found much greater than likely range of 1 m of the 21st century SLR given in AR5 of IPCC. Moreover, due to the additional load from melt ice the Sea …
Published in Journal of Offshore Structure and Technology · Vol. 8, Issue 3, 2021 · pp. 55–64 Read article
-
Analysis of Thermally Actuated Micromirrors
Abstract: Use of microelectromechanical system (MEMS) to craft deformable mirror is in the embryonic stage. However, MEMS micromirrors hold significant advantages in speed, compactness, and economy in comparison to macroscale counterparts. The MEMS micromirrors are fabricated by silicon batch processing or micrometer scale lithographic pattering technique which offer flexibility in low volume manufacturing and inter batch variations. The project is a structural study and involves the modeling of various geometries for …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 3, 2019 · pp. 17–23 Read article
-
Development and validation of a method for simulataneous determination of tenovifir disoproxil fumarate emtriculabine and isonized in bulk and pharmaceutical dosage form using RP-HPLC with relevance to toxicological aspects
Abstract: Hence, proposed analytical methods are simple, novel, economical, rapid, sensitive, reproducible and accurate for the Simultaneous estimation of Tenofovir Disoproxil Fumarate, Emtricitabine and Isoniazid in Bulk and Phamaceutical dosage form by using RP- HPLC. This Method gives reliable assay results with short analysis time using mobile phase of Acetonitrile : 0.02M Potassium Dihydrogen Orthophosphate: water (pH 5.3) in the ratio of 60: 25: 15 respectively. Retention time was found to …
Published in Research and Reviews: A Journal of Toxicology · Vol. 14, Issue 1, 2024 · pp. 17–25 Read article
-
Innovative Design and Implementation of PCD-Based Drawing Dies and Tungsten Carbide Molds for Automotive Fastener Manufacturing
Abstract: This study presents an integrated engineering investigation into the design, optimization, and implementation of advanced tungsten carbide and polycrystalline diamond (PCD) tooling technologies within the cold forging and wire drawing processes at Koobesh Kavir Semnan Company, one of Iran’s leading automotive fastener manufacturers. By combining powder metallurgy principles, material flow simulation, and experimental validation, this research introduces a technological advancement that improves productivity, tool longevity, and cost-efficiency in industrial production. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 16–26 Read article
-
Aerodynamic Effects of Wind on Multi-Story Structures: A Height- and Terrain-Based Analysis
Abstract: Wind loads are a critical consideration in the structural design of buildings, with direct implications for safety and serviceability. This study investigates the aerodynamic behavior of reinforced cement concrete (RCC) buildings under varying heights and terrain conditions, in accordance with IS: 875 (Part 3): 2015. 12 structural models representing 20 m, 35 m, and 50 m tall buildings were analyzed using extended three-dimensional analysis of building system (ETABS) across four …
Published in Journal of Offshore Structure and Technology · Vol. 12, Issue 3, 2025 · pp. 1–14 Read article
-
Comparative Study and Analysis of Composite Bridge and Concrete Bridge for Moving Loads
Abstract: Composite Bridges are mainly used in the construction of various flyovers to minimize the traffic flow. Composite highway bridges are subjected to many dynamic actions with different magnitudes due to the action of different types of vehicles. Depending on the magnitude and intensity and many other adverse effects the structural system and performance may compromise and that may lead to a reduction of the expected bridge life. A composite (steel …
Published in Trends in Transport Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 1–9 Read article
-
Dual Band Rectenna for Energy Harvesting and Wireless Power Transfer
Abstract: In this paper, anticipated antenna for energy harvesting has been studied with high directivity, high gain and good return loss. The simulation of the proposed antenna was carried using IE3Dsoftware. The presented antenna is fit for wireless power transfer at resonant frequency 2.7 and 4.75 GHz. The microstrip antenna design is very compact which is made of glass epoxy having dielectric constant of 4.4.Keywords: Microstrip patch antenna, return lossCite this …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
Comparative Analysis of CMOS CNFET and Memristor Based Full Adder Circuits and CMOS Memristor Based Multiplexer Circuits
Abstract: Continued developments in microelectronics technology have led to a myriad of new compute- intensive applications at the micro-edge, such as artificial intelligence and signal and image processing. Multiplication is a crucial arithmetic process in such applications. However, large logic complexities typically seen in traditional multipliers generate combinatorial blocks with long chains of cascaded carry addition. As such, energy efficiency has remained a primary design challenge for these applications, when powered …
Published in Journal of VLSI Design Tools and Technology Read article
-
Integrating Advanced Technologies for the Scientific Revalidation of Ayurvedic Principles
Abstract: Background: Ayurveda, a 5,000-year-old holistic healthcare system, emphasizes the dynamic balance of body, mind, and spirit. Recent advancements in science and technology have accelerated its integration into global healthcare systems. Objective: This paper explores the contribution of modern tools and methodologies to the scientific validation and enhancement of Ayurvedic principles across education, clinical practice, and research. Methods: A comprehensive literature review was conducted using databases like PubMed, Google Scholar, and …
Published in Research and Reviews: A Journal of Medicine · Vol. 16, Issue 1, 2026 · pp. 1–6 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
An Overview of Elliptical Low Pass Filter by using Defected Ground Structure Method
Abstract: Calculation and differentiation of the response of elliptical low pass filter (LPF) with and without using defected ground structure (DGS) was done. In the present work, return loss, bandwidth and gain have been evaluated. All the designs are printed on the FR4 lossy substrate of dielectric constant ( ) of 4.3, substrate thickness of 1.6 mm and loss tangent of 0.02. Moreover, the effect of controlling parameters namely slots and …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 2, 2017 · pp. 13–16 Read article
-
Comparative Analysis of CMOS CNFET and Memristor Based Full Adder Circuits and CMOS Memristor Based Multiplexer Circuits
Abstract: Continued developments in microelectronics technology have led to a myriad of new compute-intensive applications at the micro-edge, such as artificial intelligence and signal and image processing. Multiplication is a crucial arithmetic process in such applications. However, large logic complexities typically seen in traditional multipliers generate combinatorial blocks with long chains of cascaded carry addition. As such, energy efficiency has remained a primary design challenge for these applications, when powered by …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 2, 2022 · pp. 22–33 Read article
-
Control Strategies for Shunt Active Power Filters in Total Harmonic Distortion Reduction: A Comprehensive Review
Abstract: This paperwork presents a single-phase shunt active power filter to reduce total harmonic distortion.Harmonic pollution in the power system has increased significantly because of the widespread usage of nonlinearsingle phase power electronic equipment on the low voltage side. For electrical engineers, improving powerquality has emerged as their greatest obstacle. A single-phase shunt active power filter was constructed inMATLAB/SIMULINK using a voltage supply inverter and a hysteresis current regulator. The performance …
Published in Recent Trends in Electronics Communication Systems · Vol. 10, Issue 2, 2023 · pp. 30–42 Read article
-
Modulating Immune System of Mosquitoes with A Novel Salicylate Derivative: A Bioinformatics-Based Study
Abstract: The present study aims to compare the interactions of a novel derivative of salicylic acid, 5-(2-nitroethynl) salicylic acid (5-SANA, salicylic acid nitroalkene), and salicylic acid with the critical residues of mosquito’s juvenile hormone binding protein (mJHBP). Given the better water solubility of 5-SANA and salicylic acid, it is believed that they can interact quicker than the natural substrate, juvenile hormone (JH), with the cavity of mJHBP, a circulating protein in …
Published in Research and Reviews : A Journal of Immunology · Vol. 16, Issue 1, 2026 · pp. 1–5 Read article
-
Enhanced Heat Transfer in Double Pipe Heat Exchanger with Circular Fins Using Copper Nanofluid and Twisted Tape Inserts: A Computational Study
Abstract: The enhancement of convective heat transfer in a double-pipe heat exchanger utilizing circular finned twisted tape inserts and helical screw-tapes with centre rods, in conjunction with copper oxide nanofluid as the heat transfer medium was studied in this project. Computational Fluid Dynamics (CFD) simulations were conducted across Reynolds numbers ranging from 500 to 5000 to analyse heat transfer characteristics. The investigation focuses on Nusselt number improvement and friction factor analysis …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 11–22 Read article
-
Exploring Type-II Diabetes Potential of Phyto-Derived Carbon Dots
Abstract: The integration of phytoconstituents with carbon dots (C-dots) presents a novel and sustainable approach to the development of nanotherapeutics for type 2 diabetes mellitus (T2DM). C-dots, zero-dimensional carbon-based nanomaterials, exhibit unique physicochemical properties including high fluorescence, tunable surface chemistry, biocompatibility, and low toxicity. Their ability to enhance the solubility, bioavailability, and targeted delivery of poorly soluble phytochemicals renders them highly suitable for biomedical applications. This study explores the synthesis of …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 3, 2025 · pp. 08–25 Read article