Search
114 articles for “bottom-up”
-
Performance Analysis of Fully Flexible Organic Humidity Sensor with Top-Contact and Bottom-Contact OTFTs
Abstract: Abstract: Organic field-effect transistor (OFET) based humidity sensors are extensively used nowadays due to their low cost, mechanically flexible and compatibility with lower temperature fabrication techniques that support the plastic substrate based device and circuit applications. This paper investigates the humidity dependence of performance of organic humidity sensor with Top-Contact and Bottom-Contact OTFTs. Subsequently, impact of channel length on sensor performance is analyzed. The humidity sensitivity of organic sensor drain …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 1, 2019 · pp. 26–34 Read article
-
Ag₂S–Ag Nanocomposites: A Bottom-Up Approach to Enhance Thermoelectric Power Factor at Near Room Temperature
Abstract: The intrinsic ductility, low toxicity, and naturally occurring abundance of silver sulphide (Ag₂S) have made it a potential thermoelectric material in recent years. However, high electrical resistance severely limits its practical application. Here, we present a thorough analysis of how metallic Ag nanoinclusions affect the structural, electrical, and thermoelectric characteristics of Ag₂S nanocomposites made using a simple bottom-up polyol approach. (Ag₂S)₁₋ₓAgₓ nanocomposites with an Ag content ranging from 0 to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 40–55 Read article
-
Hydraulics of Flow Through and Over Fayoum Weir with Rectangular Bottom Openings
Abstract: Fayoum standard weirs have been modified by adding number of bottom openings to convey much water to downstream direction. This study aims to investigate the effects of using different configurations of Fayoum weirs with rectangular bottom openings on flow characteristics under different dimensions and number of openings. 46 weir configurations with height of 25 cm were used in this study, divided into four groups A, B, C and D. Each …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 17–25 Read article
-
Empowering Concrete: Enhancing Strength and Durability with Coal Bottom Ash
Abstract: The utilization of coal bottom ash, an industrial waste byproduct, as a sustainable alternative to river sand in concrete production has gained increasing attention due to environmental concerns and the need for resource optimization. This study examines how incorporating coal bottom ash into concrete mixtures, either partially or entirely replacing river sands, affects different properties. These properties include the workability of fresh concrete, as well as its compressive strength, splitting …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 Read article
-
Numerical Simulation-based Comparative Study of P3HT-based Top Contact and Bottom Contact OTFTs
Abstract: AbstractIn this paper presents numerical simulation-based comparative study of bottom and top contact configurations of P3HT based organic thin-film transistor (OTFT). I-V characteristics has been evaluated using the TCAD simulator and comparison of the performance parameters of these devices has been presented. The dimensions of the transistors for all the proposed structures are kept the same for a valid comparison between them. The observed results were explained based on the …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 3, 2019 · pp. 27–32 Read article
-
Aluminium Recovery from Incineration and Gasification Bottom Ashes
Abstract: The recovery of ferrous and nonferrous metals from the bottom ashes is a common practice, both for the environmental advantages of their recycle and to avoid problems of swelling and expansion that metals can cause when bottom ashes are reused in concrete production or in road construction. This paper focuses on metal recovery from bottom ashes produced in municipal solid waste (MSW) incinerators, with a particular focus on aluminium. A …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 2, 2015 · pp. 1–5 Read article
-
The Theoretical and Experimental Study of the Behavior of the Mercury Drop, Fixed on the Glass Bottom of Vessel with Fluid, Under the Acceleration of Gravity Change
Abstract: At present time, accumulated theoretical material of the studies of the equilibrium forms of the gas bubbles or mercury drops, fixed on the surface of solid material in the fluid or on the glass bottom of vessel with fluid, under the acceleration of gravity change, was carried out either on the basis of geometric similarity laws that greatly simplify the essence of physical processes, or on the basis of theoretical …
Published in Recent Trends in Fluid Mechanics Read article
-
Calculation Method for Determining the Gas Flow Rate Needed for Liquid Removal from the Bottom of the Wellbore
Abstract: As a result of flooding and accumulations of liquid at the bottomholes, the operating conditions of gas wells become complicated, so that they end up self-squeezing and losing of gas production. A method is proposed for determining the technological parameters of operation of the gas wells with the purpose of removing liquid from the bottom of the wells. Data from the gas dynamics and special studies were used to develop …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 1–8 Read article
-
The Theoretical and Experimental Study of the Behavior of the Mercury Drop, Fixed on the Glass Bottom of Vessel with Fluid, Under the Acceleration of Gravity Change
Abstract: At present time, accumulated theoretical material of the studies of the equilibrium forms of the gas bubbles or mercury drops, fixed on the surface of solid material in the fluid or on the glass bottom of vessel with fluid, under the acceleration of gravity change, was carried out either on the basis of geometric similarity laws that greatly simplify the essence of physical processes, or on the basis of theoretical …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 2, 2021 · pp. 1–12 Read article
-
Development and Characterization of Bottom Ash–Fly Ash–GGBS-Based Geopolymer Composites for Sustainable Applications
Abstract: The growing demand for sustainable construction materials has spotlighted geopolymer concrete (GPC) as an environmentally viable substitute for conventional cement-based systems. This study presents an innovative dual-waste valorization approach, integrating pulverized bottom ash (BA) and ground granulated blast furnace slag (GGBS) as binders while replacing sodium silicate (Na₂SiO₃) in the alkaline activator with treated textile effluent. Unlike prior works that focus solely on solid waste incorporation, this research pioneers the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 32–42 Read article
-
Improved Performance Characteristics of a Designed 1050 nm Bottom Emitting MQW VCSEL using Al0.25Ga0.22In0.53As/InP Materials
Abstract: AbstractIn this work, the design and performance characteristics of a bottom emitting Al0.25Ga0.22In0.53As/InP Multi-Quantum Well (MQW) Vertical-Cavity Surface-Emitting Lasers (VCSEL) have been presented for operation at a wavelength of 1050 nm. The transparency carrier density and bandgap energy of the QW and barrier materials are computed. An improved performance of the designed VCSEL has been obtained by selecting a material with high gain and lower transparency carrier density in the …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 3, 2013 · pp. 22–30 Read article
-
A Review on Synthesis and Characterisation of Nanoclusters
Abstract: Nanoclusters are materials with size less than 2 nm. Because of their small size and high surface area, they have properties which can be used for various applications like bio-sensing, catalysis, fuel cells etc. The synthesis techniques are carried out in such a way that the size-selection of nanoclusters take place. The synthesis methods discussed in this review include both top-down and bottom-up techniques. The different characterization techniques taken into …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 1–19 Read article
-
Comparative Study between Smart Controls and Conventional Bottom Hole Completions
Abstract: This research project made use of Schlumberger’s “ECLIPSE 100” reservoir simulator to predict the performance of a reservoir with an overlying gas cap and an underlying aquifer (i.e., a three- phase Water-Oil-Gas reservoir) under conventional BHC techniques. Additional work was done to ascertain the suitability of incorporating an Intelligent Well (IW) to deal with water production problem by placing Inflow Control Valves (ICV) at particular segments in the well to …
Published in Journal of Petroleum Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 77–89 Read article
-
Effect of Surface Free Energy on the Surface-Driven Capillary Flow in SU-8 based Glass Microfluidic Devices
Abstract: Surface-driven capillary flow of dyed water is recorded in the SU8 based glass microfluidic devices fabricated by the standard cleanroom processes. The effect of surface wettability on the surface-driven capillary flow is studied in the individual SU8 based microfluidic devices of glass bottom wall and polyimide bottom wall. The surface-driven capillary flow is faster on the glass bottom wall surface due to the higher polar component of solid surface free …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 1–7 Read article
-
Production of Dense Graded Cold Asphalt Mixtures with New Cementitious Material
Abstract: The energy revolution for offering sustainable energy supply and utilize in terms of economically and environmentally is interested evident for governments and industry. Cement is the main material for constructing the society’s buildings and infrastructures. Meanwhile, 5% of global CO2 emission is related to cement industry. Therefore, replacing of cement with one of the other sustainable materials is one of the main objectives of the climate change mitigation strategies around …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 3, 2016 · pp. 15–22 Read article
-
Experimental Investigation on Two Lift Cement Concrete Pavement
Abstract: Rigid pavement construction is promoting now a days due to its durablilitycriteria.Cost of fresh aggregate is 30-35% more than recycled aggregate which causes increase of overall cost of pavementthustwo lift pavement has great potential as a sustainable paving solution.The main objective of this study is to use recycled aggregate in concrete pavement which reduced overall cost of the pavement.Sincenatural aggregate scarcity is increasing day by day.Generally homogenous layer of concrete …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 1–7 Read article
-
Exploration of The Justice Section from Book of Luminous Benefits Explanation by Mr. Nimat Allah Al-Jazairi (1050-1112 AH)Assist. Lecturer.
Abstract: This study included the topic of justice ,that was involving a lot of sayings ,and explanations of Mr. Nimat Allah Al-Jazairi saying: ((So justice)) is the interpretation, and justice in the language is the tendency , and in terminology is what the author mentioned .His saying: ((a built infinitive of the object)) ended. The purpose of this assessment is to refute the objection that the commentator Al-Radi mentioned to the …
Published in Journal of Advancements in Library Sciences · Vol. 11, Issue 1, 2024 · pp. 35–46 Read article
-
Stability Analysis of Pontoons under Breakwater and Mooring System
Abstract: Floating pontoons are the new advance method and technology in construction industry. Land issue is very common issue in various countries. Constructing on waters and in the waters is the only option to overcome the land issue. Also, the construction of the bridges and other water-based structures also can be constructed by using pontoons. Pontoons are being used in the construction since ancient time Including temporary bridges and small shelters. …
Published in Journal of Water Resource Engineering and Management Read article
-
Stability Analysis of Pontoons Under Breakwater and Mooring System
Abstract: Floating pontoons are the new advanced method and technology in the construction industry. Land issues are very common issues in various countries. Constructing on and in the waters is the only option to overcome the land issue. Also, the construction of the bridges and other water-based structures can be constructed by using pontoons. Pontoons have been used in construction since ancient times. This includes temporary bridges and small shelters. It’s …
Published in Journal of Water Resource Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 29–37 Read article
-
Reliability Analysis of a Semi-gravity Retaining Wall Designed to Eurocode 7
Abstract: This research investigated the structural integrity of a semi-gravity retaining wall when subjected to potential sliding and overturning failures, while adhering to the guidelines outlined in Eurocode 7. It is widely acknowledged that the factor of safety alone is insufficient for risk assessment, and previous research has demonstrated the challenges in identifying how much safer a retaining wall becomes as the factor of safety increases. The dependability index, the element …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 3, 2023 · pp. 35–47 Read article