Search
395 articles for “Inter-phase”
-
Instrument for Identification of Inter-phase between Two Liquids (Organic and In-organic) in Extraction Process Using Conductivity
Abstract: This paper is for design and development of a concept for an instrument for identification of phase separation between two liquids (i.e. organic and inorganic) in a single vessel. The instrument finds its applications in various industries like oil, nuclear etc. The process dynamics are maintained such that the ratio between the organic and the inorganic liquids always remains the same. Any deviation would indicate a change in the dynamics …
Published in Journal of Instrumentation Technology & Innovations · Vol. 2, Issue 1, 2012 Read article
-
Fuzzy Logic and Internet of Things based Automatic Three Phase Changeover
Abstract: Three phase supply is preferred over single-phase supply not only in commercial sector but also in residential sector due to its ability of supplying uniform and less fluctuating power. However phase cuts or phase failure may occur in a three phase supply due to a disturbed transformer or any other technological factor. This generally renders one phase inoperative. A commonly available solution is manual three phase changeover switch. Manual switching …
Published in Journal of Advancements in Robotics · Vol. 5, Issue 3, 2018 · pp. 1–11 Read article
-
Sustainable Electromagnetic Culinary Interface with Dual-Phase Filtration for Energy Efficiency and Environmental Impact Reduction
Abstract: Induct Net is an innovative kitchen appliance that seamlessly integrates advanced cooking technology with an inbuilt chimney system, marking a significant step towards sustainable culinary environments. This space-efficient device prioritizes energy efficiency, user safety, and environmental responsibility through its incorporation of internet of things (IoT) technology. Induct Net features a dual-filtration system with removable grease and charcoal filters, ensuring optimal performance while reducing waste. The IoT connectivity facilitates real-time monitoring, …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 3, Issue 1, 2025 · pp. 45–50 Read article
-
Polymer-Inspired Underwater Friction Stir Welding of Aluminum–Copper Composite Joints
Abstract: The problem of high-performance dissimilar joints and their compatibility with polymer and composite engineering applications is the impetus to the current work. This paper seeks to investigate the possibility of applying the polymer-based composite ideas with underwater friction stir welding (UWFSW) to improve the performance of AA5083 aluminumcopper joints. To achieve this a systematic experimental method was followed by varying the tool rotational speed, traverse speed and tilt angle and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 372–383 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
Structural Analyses of SoxY and SoxZ Proteins from Epsilonproteobacterium Sulfurimonas denitrificans: A Structural Bioinformatics Approach
Abstract: Abstract:Molecular level participation of epsilonproteobacteria for the global sulfur oxidation phenomena is an essential zone to be indulged with. Epsilonproteobacteria aids in the microbial sulfur metabolism both at and beneath the seafloor. For the recycling of the inorganic sulfur compounds, microbial redox reactions are one of the responsible and most important reactions to maintain the environmental sulfur balance. These reactions are carried out by phylogenetically diverse sets of microorganisms. The …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 5, Issue 1, 2015 · pp. 35–44 Read article
-
Total-internal-reflection-based optical rotation quasi-phase-matching for efficient second-harmonic generation in Cadmium Germanium Arsenide crystal
Abstract: This study investigates a total-internal-reflection (TIR)-based optical rotation quasi-phase-matching (ORQPM) approach for second harmonic generation within a cadmium germanium arsenide crystal slab. The crystal is coated with a thin film of yttrium oxide to facilitate precise control over phase shifts between p- and s-polarized light upon reflection at the slab-film interface. By leveraging the interplay between TIR- induced optical rotation and fractional QPM effects at designated bounce points, the configuration …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 01–09 Read article
-
Study of Diurnal Anisotropy Variation in Cosmic Ray Intensity During Minimum Solar Activity Period
Abstract: we present a comprehensive study of cosmic ray variations over the period from 1964 to 2018, encompassing solar cycles 20, 21, 22, 23, and 24. Both annual average and day-to-day variations have been analyzed to capture the temporal dynamics of cosmic ray intensity across multiple solar cycles. The study focuses particularly on periods of minimum solar activity, namely the years 1965, 1976, 1986, 1996, and 2008, when cosmic ray modulation …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 2, 2025 · pp. 30–37 Read article
-
Experimental and Simulation Study on Reduction Kinetics of Magnetite Ore by using Hydrogen
Abstract: In the present work, magnetite ore fines pellets were prepared for a study of reduction kinetics using hydrogen gas. In the present work, various parameters are investigated to assess their influence on reduction kinetics with respect to hydrogen utilisation. The different input variables influence the process, yielding the reduction fraction. The effect of temperature on reduction kinetics with hydrogen flow rate was explored for the optimum value of these parameters. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 71–81 Read article
-
Sputter Deposition of Ni/Ti Thin Film and their Molecular Dynamics
Abstract: Ni/Ti multilayer fabricated using DC/RF magnetron sputtering technique. Multilayer of Ni/Ti is deposited by alternate deposition of nickel layer and titanium layer, followed by annealing at different temperatures. Annealing treatment is carried out to achieve NiTi SMA thin films. The annealing was accompanied by inter-diffusion, amorphization and precipitation of various intermetallic phases. Classical molecular dynamics simulations have been performed for the atomic diffusion during annealing of Ni/Ti multilayer using embedded …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 35–43 Read article
-
An Operational Study to Assess and Maintain the Oral Hygiene of Toddlers and Preschoolers in a Resettled Colony of Dadu Majra Colony UT, Chandigarh, 2011-12
Abstract: Oral hygiene is known as the process of maintaining the mouth, teeth, and gums clean and healthy all at the same time to prevent tooth decay and gum disease. Knowledge imparted at a right age on a regular basis in incredible manner can go a long way in encouraging children to maintain good oral hygiene. The current study was undertaken with the objective to develop skills in maintaining the oral …
Published in Research and Reviews: A Journal of Dentistry · Vol. 4, Issue 2, 2013 · pp. 1–7 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
What if the "Big Bang" was not the Beginning Point of our Observable Universe?
Abstract: The Big Bounce theory envisions the Big Bang as the start of a period of expansion followed by a period of contraction. According to this viewpoint, there was a Big Crunch (another singularity) followed by a Big Bang, or, more simply, a Big Bounce. This implies that we could be at any point in an infinite series of universes, or that the current universe is the very first interaction. But …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 10, Issue 3, 2021 · pp. 1–7 Read article
-
Design and Implementation of High-Speed Low Power Low Area Hybrid One Bit Full Adder Using CMOS Technology
Abstract: In this article, we'll take a look at a new kind of Full Adder (FA) design that mixes traditional Complementary Metal Oxide Semiconductors (CCMOS) with Pass Transistors (PTs) and Transmission Gates (TGs). To analyze the circuit's performance, we used the Mentor Graphics software package. Since all twenty (20) varieties of Full Adder circuits were able to be measured and compared, this research was conducted. When the clock rate of the …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 2, 2023 · pp. 29–39 Read article
-
The Hidden Struggle: Premenstrual Depression its Impact on Women’s Health and Management Strategies: A Narrative Review.
Abstract: Background: Premenstrual depression, including Premenstrual Syndrome (PMS) and Premenstrual Dysphoric Disorder (PMDD), represents a significant yet underrecognized contributor to women’s mental health burden. Hormonal fluctuations during the luteal phase interact with neurotransmitter systems, particularly serotonin and GABA, leading to affective and somatic symptoms that impair daily functioning. Objective: This systematic review synthesizes evidence on the prevalence, pathophysiology, psychological impact, and management strategies of premenstrual depression among reproductive-aged women, with particular …
Published in International Journal of Nutritions · Vol. 3, Issue 1, 2026 · pp. 21–32 Read article
-
Dynamic Performance Analysis of Non-metallic Spur Gear subjected to Variable Loads and Speeds
Abstract: The thrust for design and development of nonmetallic gear results in fabrication of inexpensive cement reinforced polypropylene based composite material spur gear. In this work, several experiments are conducted under variable loads and speeds and subsequently the resulting effect of heat emission on the performance of the gear is analyzed. A laboratory made gear test-rig is modified and suitably retrofitted; while pure polypropylene and 10 wt% cement reinforced spur gears …
Published in Trends in Machine design · Vol. 2, Issue 3, 2015 · pp. 1–19 Read article
-
An In-Depth Analysis of Nanocomposites and Their Uses
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions at the nanoscale. When material dimensions are shrunk to the nanoscale level, phase interfaces are created, and they are essential for enhancing the material's qualities. The surface area to volume ratio of the reinforced material used in the production of nanocomposites has a direct impact on our understanding of the relationship between structure and …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 24, Issue 3, 2022 · pp. 15–33 Read article
-
Nuclear Hulthén potentials for F and G partial waves
Abstract: In the past few decades, several investigation have been made and at the same time a number of theoretical models have also been projected for the nucleon-nucleon scattering in the low and intermediate energy range. These phenomenological models involve large number of free parameters to be fitted to reproduce the physical observables. In contrast to these potentials a two-term four parameter nuclear Hulthén type interaction is proposed to describe the …
Published in Research & Reviews : Journal of Physics · Vol. 10, Issue 2, 2021 · pp. 31–37 Read article
-
Quantitative Study of Deformations using Electronic Speckle Pattern Interferometer (ESPI)
Abstract: AbstractThis paper discusses a research proposal to use temporal phase shifting technique of Electronic Speckle Pattern Interferometer (ESPI) for qualitative and quantitative study of deformations of various kinds. Proposed method for quantitative study is a five step phase shifting algorithm for extraction of phase information from the deformed object. Mechanical and thermal deformations in metallic thin films, metal plates and acoustic deformations are been planned for the study.Keywords: Temporal phase …
Published in Research & Reviews : Journal of Physics · Vol. 4, Issue 2, 2015 · pp. 1–7 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article