Search
175 articles for “column”
-
Innovations in Atmospheric Remote Sensing: From Satellites to Lidar and Beyond
Abstract: Atmospheric remote sensing plays a vital role in monitoring and understanding the Earth's atmosphere, providing essential data for climate studies, weather forecasting, and environmental management. This review discusses various remote sensing technologies, including satellites, radiometers, lidar, radar, and GPS radio occultation, each contributing unique capabilities for atmospheric observations. Satellite remote sensing allows for global coverage and continuous monitoring of atmospheric parameters, while ground-based systems enhance localized measurements. Key applications include …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 10–15 Read article
-
A Sensitive SPE-ECD-GLC Procedure for Analyzing Simazine Quantitatively in Food Products
Abstract: Short and simple solid-phase extraction (SPE) method interfacing and hyphenating gas liquid chromatographic-electron capture detection (GLC-ECD) method has been developed for the qualification and quantification of simazine in some daily used agro products. United States Pharmacopeia G-42 gas chromatography stationary phase with ZB-35a, HTb Inferno-cZ (Zebron, Za) capillary column with an enlarged and extended temperature range of –60° to 400°C and electron capture detector was selected correlating some chemical, physical …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 3, Issue 1, 2025 · pp. 20–27 Read article
-
Anti-Microbial Potential of Onion Peel Extracts
Abstract: Onion (Allium cepa L.) is a source of bioactive compounds, particularly flavonoids such as quercetin, and possesses antioxidant and beneficial properties to health. Onion skin, which is normally considered as waste, has more of these compounds compared to the edible portion. This research sought to isolate and analyze the antioxidant and antimicrobial activity of onion skin with ethanol and hexane using Soxhlet and column chromatography techniques. Antioxidant activity was maximum …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 15, Issue 3, 2025 · pp. 1–10 Read article
-
RP-HPLC Analytical Method Development and Validation for Quantitative Estimation of Metoclopramide Hydrochloride in Solid Oral Formulations
Abstract: RP-HPLC technique formulated for the numerical assessment of Metoclopramide Hydrochloride in tablet formulation has been confirmed for reliability. A C18 column facilitated the chromatographic separation using a mobile phase comprising 60:40 (v/v) potassium dihydrogen phosphate buffer: meth anol mixture. Such method was used to detect, where the retained time was 6.78 minutes and Metoclo pramide Hydrochloride produced a clear peaked at 273 nm. Results were in agreement with ICH Q2 …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 2, 2025 · pp. 07–15 Read article
-
Bioanalytical Method Development and Validation for the Estimation of Levothyroxine in Human K₃EDTA Plasma by Using UPLC-MS/MS
Abstract: A rapid, sensitive, and highly selective UPLC-MS/MS method was developed and validated for the quantitative estimation of Levothyroxine in human plasma using Levothyroxine-D₃ as the internal standard (IS). Chromatographic separation was achieved on a Gemini NX-C18 column (50 × 3.0 mm, 3 µm) with a mobile phase consisting of acetonitrile and water (70:30, v/v) containing 0.015% formic acid at a flow rate of 0.5 mL/min. The total run time was …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 3, 2025 · pp. 32–46 Read article
-
Development of a Natural Fiber Sand–Carbon Composite Filter Using Agave sisalana for Sustainable Domestic Sewage Treatment
Abstract: This study presents an innovative approach to decentralized domestic sewage treatment by integrating Agave sisalana fibers as the core functional component within a composite filtration system. The filtration column was constructed using a vertical 1:3:1 layered configuration comprising silica sand (top), Agave sisalana fibers (middle), and activated carbon (bottom). Comprehensive experimental analyses were conducted to evaluate the system’s efficacy in removing key water quality parameters, including turbidity, total solids (TS), …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 43–51 Read article
-
Configuration and Properties of Group III Elements in the Periodic Table
Abstract: Group III elements comprise those found in the third column of the periodic table, including boron, aluminum, gallium, indium, and thallium. These elements possess three valence electrons in their outermost shell, characterized by the electron configuration ns2np1, which influences their location and characteristics within the periodic table. The distribution of electron pairs, formal charges, oxidation states, and molecular morphologies of Group III elements and their compounds are illustrated in this …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 2, 2025 · pp. 23–30 Read article
-
Continuous Commissioning Techniques for Ground Source Heat Pumps: Review
Abstract: This study offers a model-based continuous commissioning methodology to find control-related performance gaps in HVAC systems with ground-source heat pumps. Traditional continuous commissioning is still helpful in finding energy performance gaps, even if MBCCx employs a system model as a reference to find operational inefficiencies and control issues arising from subsystem integration. A calibrated physics-based model that depicts the system performance as intended during the design phase forms the basis …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 3, 2025 · pp. 22–36 Read article
-
Stability-Indicating Rp-Hplc Development and Validation for the Estimation of Lercanidipine Hydrochloride Content in Tablet Dosage Form
Abstract: A sensitive, stability-revealing, and easy reverse-phase high-performance liquid chromatographic (RP-HPLC) technique was developed and rationalized to be in a position to determine Lercanidipine hydrochloride in ingested dosing preparations. It was separated by chromatography on a C 18 column using a mobile phase containing 10 mM potassium dihydrogen phosphate buffer and methanol (20:80, v/v; pH 4.0) at a flow rate of 1.0 mL/min and UV detected at 258 nm. The retention …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 1, 2026 · pp. 17–26 Read article
-
Effect of Span, Load Intensity, and Beam Geometry on Stress and Deflection Behavior of RCC Beams
Abstract: This study investigates the influence of variations in beam geometry, span, load intensity, and permissible stresses on the structural behavior of reinforced concrete beams. Using classical bending and shear stress formulations, the effects of a 20% increase in key parameters were analytically evaluated. Results indicate that a 20% increase in beam span leads to a proportional 20% increase in beam depth, whereas a 20% increase in beam width or permissible …
Published in Journal of Structural Engineering and Management · Vol. 13, Issue 1, 2026 · pp. 9–22 Read article
-
Structural Assessment of Rigid Pavement Systems Under Heavy Loading Conditions
Abstract: This study presents an analysis of pavement and foundation layer design subjected to heavy vertical loads and upward soil pressure. A total load of 1716 tonnes transmitted from the superstructure is considered acting on the pavement system. Due to upward soil pressure, tensile stresses develop in the foundation layers, requiring adequate thickness of sand and aggregate layers to ensure structural stability. Based on the tensile strength of sand (2 N/mm²), …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 36–48 Read article
-
Photochemically Assisted LC–MS Method Development and Validation for Stability-Indicating Determination of Glasdegib in Rat Plasma
Abstract: A simple, precise, and cost-effective LC–MS method was successfully developed for the determination of Glasdegib in rat plasma. The method optimization was carried out by systematically varying key chromatographic parameters, including flow rate, injection volume, analyte concentration, and mobile phase composition, to achieve optimal sensitivity and resolution. A C18 Hypersil BDS column (150 mm × 4.6 mm, 3.5 µm particle size) was used for chromatographic separation, offering effective peak shape …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 1, 2026 · pp. 11–20 Read article
-
Binary Distillation Design and Control
Abstract: This paper discusses design and control strategies of binary distillation process using ASPEN PLUS V8.8 simulating tool. Steady state design procedure for binary distillation column design to separate acrolein and propylene is explained. Dynamic simulations were conducted by designing control structure. The developed control structure contains level controllers, pressure controllers and temperature controllers. The developed control structure has shown good performance in withstanding the various process disturbances.
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 19–25 Read article
-
Mass Transfer Correlation Development in Circular Conduit with the Presence of Entry Region Spiral Tape Wound on Rod as Turbulence Promoter in Homogeneous Flow
Abstract: In this study, an experimental investigation has been carried out to develop a model for mass transfer correlation. As a part of that experimental data obtained in terms of limiting current values and the data was measured for various flow rates using spiral tape wound on a rod promoters of varying geometric parameters. The geometric parameters are height (H), width (W) and the pitch (P). The experiment carried out for …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 3, 2014 · pp. 1–14 Read article
-
Design and Energy Analysis of Butyl Acetate Plant using Aspen HYSYS and Aspen Energy Analyzer
Abstract: This paper discusses the design of Butyl acetate production process by using Aspen Hysys. Heat integration is performed for the entire designed plant using Aspen Energy Analyzer. The proposed design consists of a mixer, continuous stirred tank reactor and two distillation columns. Methyl acetate reacts with butyl alcohol and gives the butyl acetate, methanol. The paper is divided in to three parts. In the first part, the entire process plant …
Published in Emerging Trends in Chemical Engineering · Vol. 1, Issue 2, 2014 · pp. 15–26 Read article
-
Selection of R14-tyres using Analytic Hierarchical Process on the Basis of Uniformity and Strength
Abstract: Tyres play a commanding role in an automobile industry. Balancing and safety of the vehicle are the primary issues for automobile industry. These two parameters are highly dependent on the uniformity and strength of the tyres. There are various criteria that affect tyres uniformity and strength. Consequently, selection of tyres is a Multi-criteria Decision Making (MCDM) problem. In that respect are many methods available for selection of tyres; however, this …
Published in Journal of Automobile Engineering and Applications · Vol. 1, Issue 3, 2014 · pp. 7–17 Read article
-
Direct and rapid synthesis of amides from carboxylic acids under solvent free condition using Clay based Heterogeneous recyclable catalyst
Abstract: Direct condensation of Carboxylic Acids and Amines has resulted in a highly simple and practical technique for the synthesis of amides. Fe-Al clay catalyst was used in the solvent-free, microwave-irradiated amide synthesis. Only a small amount of the catalyst was needed to produce products in very short of time with a good yield. The catalyst was easy to separate and could be recycled several times with negligible loss of catalytic …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 2, 2023 · pp. 1–9 Read article
-
Production of Pectin from Orange Peels (Citrus sinensis)
Abstract: The study on pectin manufacturing from orange peel raw material indicated the effect of operating temperature on the quality and quantity obtained at a given mass of orange peels loaded in the distillation column, as well as the influence of time. The pectin was measured at various operating temperatures, times, and pH values of acidic media namely 1, 1.5, 2, 3, and 4 with operating temperatures of 60°C, 70°C, and …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 3, 2023 · pp. 29–40 Read article
-
IMPACT OF MASONRY INFILL WALLS ON THE SEISMIC RESPONSE OF G+7 REINFORCED CONCRETE BUILDING
Abstract: AbstractReinforced concrete [RC] frame structure with masonry infill walls are being widely used for various purposes such as multi-storied residential, commercial, buildings in the earthquake-prone area. For partition and external walls of building infill walls or panels are commonly used to fill the gap between beam and column frame.The present study investigates the influence of the infill walls on the seismic performance of the high rise reinforced concrete building prone …
Published in Journal of Construction Engineering, Technology & Management · Vol. 8, Issue 2, 2018 · pp. 33–43 Read article
-
A Reliable Routing Architecture and Algorithm for Network-on-Chip
Abstract: The Network-on-Chip (NoC) is Network-version of System-on-Chip (SoC) means that on-chip communication through packet based networks. In NOC topology, routing algorithm and switching are main terminology. The routing algorithm is one of the key factors in NoC architecture. The routing algorithm which defines as the path taken by a packet between the source and the destination. The paper proposes a novel algorithm for a Network-on-Chip, which is based on packet …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 3, 2015 · pp. 40–48 Read article