Search
88 articles for “sample preparation”
-
DEM Simulation of Macro and Micro-scale Behavior of Granular Materials during Loading and Unloading
Abstract: The present paper aims at comparing the simulated stress-strain behavior of granular materials quantitatively with the experiment and exploring the evolution of the micro-scale behaviors during loading and unloading using the discrete element method (DEM). A numerical sample consisting of 9826 randomly generated spheres similar to the experiment was prepared. The numerically prepared isotropic sample was subjected to loading and unloading under strain controlled condition. It is noticed that the …
Published in Journal of Geotechnical Engineering Read article
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Temperature-Dependent Viscoelastic Response of Magnetorheological Grease with Varying Particle Shapes
Abstract: This study examines the effect of temperatures on the magnetic and rheological properties of magnetorheological greases (MRGs) comprised of different particle shapes, under oscillatory shear mode test. Two samples were prepared with 70 wt.% flake-shaped electrolytic iron particles (EIP) and spherical carbonyl iron particles (CIP) which dispersed in 30 wt.% lithium-based grease, separately. Respective to magnetic properties test, the vibrating sample magnetometry (VSM) revealed that MRG-EIP exhibited 11.4% higher magnetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 139–147 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Enhancing Concrete Durability and Mechanical Properties for Pavement Quality Concrete (PQC) Roads Using Basalt Fiber Reinforcement
Abstract: Concrete, by nature, is brittle and has a very low tensile capacity, which is a double whammy in transportation infrastructure, such as pavement quality concrete (PQC), for roadways, where we need durability and strength. One such method is the use of basalt fibre, as it is a much better way of enhancing the road runway way performance of concrete. This research studies the impact of the addition of basalt fibres …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 266–280 Read article
-
Study of the Rheological, Physical-Mechanical Properties of Disposed Polypropylene and Polyvinyl Chloride Binary Mixtures
Abstract: In this study, various compositions were prepared by modifying the decommissioned polypropylene (PP)-based polymer waste with polyvinyl chloride (PVC) in different proportions for the purpose of modification, and the flow index and physical and mechanical properties of their alloys were studied. As a result of the research, the following results were obtained. PP/PVC binary compositions were prepared and samples were obtained based on 6 different proportions by changing the amount …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 Read article
-
Molecular Transport Kinetics of Non-Polar Solvents Through AGNP Filled EPDM Elastomeric Composites
Abstract: EPDM Based rubber composites can be used in tank and pipe lining works. In these applications one of the major requirements is that the composite must have good fluid permeability and chemical degradation resistances in their working environment. In order to enhance the performance of EPDM rubber to suit these applications, scientists and engineers are trying to develop novel nanocomposites by incorporating nano fillers. In the present work, to ensure …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 993–1006 Read article
-
Assessing the Influence of Aggregates and Cement Type on the Properties of Roller-compacted Concrete
Abstract: Roller-compacted concrete (RCC) pavement is suitable for heavy traffic and harsh environment. In the present investigation, RCC slab samples have been prepared using two types of aggregates (crushed and rounded), and two types of cement binder (ordinary Portland and sulphate resistant). Cubes and beam specimens have been extracted from the slab samples with the aid of diamond saw. Specimens were tested for bulk density, ultrasound pulse velocity, compressive and flexural …
Published in Trends in Transport Engineering and Applications Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: The nanocomposites Ag NPs-zeolite involve zeolite loaded with silver nanoparticles and have been prepared by an easy one-pot hydrothermal autoclave method. Three samples of silver-bearing zeolite were prepared for 8 hours, 6 hours, and 4 hours, respectively, inside an autoclave at 100°C. A range of characterization procedures were used to examine the samples, such as x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV-visible spectroscopy, and zeta potential. Results …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 80–90 Read article
-
Service Life Improvement Analysis of Cryogenically Treated Blanking Punch
Abstract: After traditional heat treatment, Cryogenic treatment is carried out as a secondary process to improve the hardness and wear resistance of tool steels. The researchers have already studied and it is well published the potential use of cryogenic treatment of AISI D2 tool steel under laboratory conditions. However, to ensure the sustainable use of this technology for industrial application, its analysis is essential. Therefore, in this work a small scale …
Published in Trends in Mechanical Engineering & Technology Read article
-
Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron
Abstract: In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the selective amount of silicon, molybdenum, copper and chromium. For fracture toughness characterization, the specimens are prepared from the samples in "as-cast" conditions. The value of static fracture toughness obtained from the experiments for the specimen of Heat-2 with a fatigue pre-crack is 54.49 MPa√ , whereas, for …
Published in Journal of Polymer & Composites Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Experimental Investigation on Thermal Conductivity and Viscosity of Phase Change Material (NaNOᴣ and KNOᴣ) with Different Concentrations of ZnO Polymer Nanofluids for Solar Energy Absorption
Abstract: When evaluating the effectiveness of solar heat absorption methods or solar thermal energy storage systems (TESS), heat transfer fluid is a crucial element. Thermal conductivity and usable heat obtained for any industrial or immediate power plant efficiency are improved by the distinctive refining of Heat Transfer Fluid (HFT). The phase change material used in this study, known as solar salt is a blend of 60% NaNO3 and 40% KNO3. It …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 25–35 Read article
-
Durability Assessment of Geopolymer and OPC Concretes under Chloride and Sulphate Chemical Attack
Abstract: The main problems with durable concrete constructions are attacks by sulphates and chlorides on concrete. The primary objective of this study is to evaluate how the strength properties of concrete are affected by the incorporation of fly ash when exposed to environmental conditions involving sulphate and chloride solutions. In this research, geopolymer concrete (GPC) is utilized as a replacement for conventional ordinary Portland cement (OPC). The concrete composition is prepared …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–218 Read article
-
An Experimental Investigation of Impact of Polyproplene as a Partial Replacement in Concrete
Abstract: India, as a developing nation, will require high-strength and high-performance concrete for future infrastructure projects. Fibrous concrete, which incorporates fibers to enhance structural integrity, is one such material that could meet these demands. With different concrete fibrous materials, shapes, distributions, orientations, and densities, fibrous concrete takes on different characteristics. Polypropylene is a lightweight synthetic fiber that enhances the structural strength of concrete and helps prevent the formation of cracks. In …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 1–6 Read article
-
Elucidation of Physical Structural Stability of Nickel Nanoparticles Additive-Based Magnetorheological Grease
Abstract: This study investigates the influence of nickel nanoparticles on the physical properties and structural stability of magnetorheological grease (NMRG) as a smart composite. The incorporation of nickel nanoparticles aims to mitigate issues commonly observed in conventional magnetorheological grease (MRG), including particle aggregation within the fibrous matrix, limited material performance, and deformation instability. NMRG samples containing 1–5 wt% nickel nanoparticles were prepared using a mechanical stirring method. The tests focused on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–215 Read article
-
Design and Evaluation of Extended-Release Tablet Compositions Containing Oxaprozin: Integrating Concepts from Bioinformatics
Abstract: The procured sample of Oxaprozin was tested for its identification. The manufacturer also was confirmed of quality and purity of sample. The sustained release tablets of Oxaprozin were prepared by wet granulation method, They were evaluated for weight variation, drug content, friability, hardness, and thickness for all batches (T-1 – T-10). The release of Oxaprozin from sustained release tablet of various formulations varied according to the ratio and degree of …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 11, Issue 1, 2024 · pp. 39–45 Read article
-
Design and Evaluation of Extended-Release Tablet Compositions Containing Oxaprozin: Integrating Concepts from Bioinformatics
Abstract: The procured sample of Oxaprozin was tested for its identification. The manufacturer also was confirmed of quality and purity of sample. The sustained release tablets of Oxaprozin were prepared by wet granulation method, They were evaluated for weight variation, drug content, friability, hardness, and thickness for all batches (T-1 – T-10). The release of Oxaprozin from sustained release tablet of various formulations varied according to the ratio and degree of …
Published in Research and Reviews: A Journal of Toxicology · Vol. 11, Issue 1, 2024 · pp. 39–45 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article