Search
116 articles for “Binder”
-
Modeling of Thermocol Waste Polymer Reinforced Asphalt Bitumen
Abstract: The purpose of this research is to investigate the possibility of using thermocol waste as polymer additives in Bituminous Mix. The characteristics of thermocol modified binder obtained by fix mixing temperature, was investigated. The binders were prepared by mixing the PET in 1, 2, 3, 4 and 5% (by the weight of optimum bitumen) with 80/100 penetration grade bitumen at temperature of 150ºC. It may be inferred that PET-modified bituminous …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 12–16 Read article
-
Initiation of Distress in Asphalt Concrete After Practicing Moisture Damage
Abstract: The moisture damage of asphalt concrete is considered as major type of distress in heavy rainfall environment. In this work, the decline in the initial flexural stiffness of asphalt concrete was monitored after practicing the moisture damage process. The variations were analyzed relative to the control mixture. Asphalt concrete mixtures were created in the laboratory with the optimal binder content. Extra mixtures were also prepared with ±0.5% variation of binder …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 7–13 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Evaluation of Mechanical Behaviour of Tungsten Carbide and Magnesium Reinforced Aluminium Matrix Composites
Abstract: With industries like automotive and aerospace also being more inclined on the lightweight material and strength that is much substantial, the aluminium-based metal matrix composite has become a major focus of interest. This paper examines the influence of addition of tungsten carbide (WC) and magnesium (Mg) particles on the mechanical characteristics of Al6063 aluminium alloy. The crucible casting technique was made in two composite compositions 2.5 percent and 5 percent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1–8 Read article
-
Cloning and Expression of LPS-Binding Single Domain Antibody Clones Selected from Phage Display Library of Indian Desert Camel
Abstract: Despite the absence of light chains in their structure, camelid and shark “heavy chain antibodies” (HCAbs) variable domains (designated as VHH) are able to make functional paratopes. The authors have selected lipopolysaccharide (LPS)-binder “single-domain antibodies” (dAb) clones from the previously constructed phage display library of (LPS)-immunized Indian desert camel. This study was undertaken to make available large amounts of some LPS-binder dAb clones by using a suitable expression vector-host system …
Published in Research and Reviews : A Journal of Immunology · Vol. 4, Issue 1, 2014 · pp. 1–7 Read article
-
Microstructural Evolution and Mechanical Performance of Ambient-Cured Fly Ash–Metakaolin Inorganic Polymer Composites Activated by Anhydrous Sodium Silicate Powder
Abstract: Inorganic geopolymer networks offer a low-carbon and sustainable solution to traditional binder systems through the alkali-activation of industrials-grade aluminosilicate material. The present paper focuses on the microstructure development and the mechanical performance of the ambient-cured fly ash – metakaolin inorganic polymer composite activated with solid anhydrous sodium silicate powder. Five inorganic polymer binder combinations were formulated by replacing fly ash with metakaolin at mass fractions of 0%, 10%, 20%, 30%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Performance Evaluation of Semi-Dense Bituminous Macadam with Crumb Rubber Modified Bitumen
Abstract: This research focuses on evaluating the performance behavior of Semi-Dense Bituminous Macadam (SDBM) mixes incorporating 9% Crumb Rubber Modified Bitumen (CRMB), with varying proportions of bitumen binder. The aim is to understand how different binder contents influence critical pavement properties such as Marshall stability, flow value, bulk density, air voids, Voids in Mineral Aggregate (VMA), and Voids Filled with Bitumen (VFB). The experimental investigation reveals that increasing the bitumen content …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 15–20 Read article
-
Advancing Conductive Ink Formulations for DIW with Graphene and Hybrid Nanostructures
Abstract: The development of solvent-based conductive inks for direct ink writing (DIW) has gained significant attention as a pathway toward flexible, wearable, and scalable electronic devices. This review critically examines conductive fillers, binders, solvent systems, and hybrid ink strategies reported in recent literature. Graphene and carbon nanotubes (CNTs) remain the most studied fillers due to their high intrinsic conductivity and unique dimensionality, but challenges such as restacking, bundling, and high viscosity …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 36–49 Read article
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Structure–Property Modeling of Cement-Based Multi-Component Composites Using Ensemble Machine Learning and Explainable Feature Attribution
Abstract: Accurate prediction of compressive strength is central to structure–property optimization, quality control, and sustainability-driven design in cement-based composite materials. Cementitious systems represent heterogeneous multi-phase composites composed of reactive binder matrices and dispersed aggregate phases, whose macroscopic mechanical performance emerges from complex nonlinear interactions among constituents and curing-dependent microstructural evolution. This study develops a data-driven structure–property modeling framework to quantify the nonlinear dependence of compressive strength on multi-component composite composition and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 112–131 Read article
-
Studies on Polymer Modified Bitumen with various Fiber Impregnation
Abstract: Transportation sector is showing immense growth in the recent decades, modern vehicles introduced require a more stable platform to run better. In terms of road construction, we are not yet reaching the modernized standards adopted by other countries and usage of modern and innovative road construction materials are yet to be used in transportation infrastructure sector. The available roads are also getting damaged due to improper maintenance of top layer …
Published in Trends in Transport Engineering and Applications · Vol. 1, Issue 3, 2014 · pp. 19–24 Read article
-
Contributing factors in the initiation of failure of asphalt concrete
Abstract: As long as the asphalt concrete pavement is under service, signs of failure usually initiate and the distress types start showing throughout the service life. The asphalt concrete pavement practices repeated tensile and shear stresses through the vehicular loading. In the present study, the contributing factors in the initiation of failure under repeated flexural stresses have been detected. Slab samples of Asphalt concrete have been prepared at the laboratory by …
Published in Trends in Transport Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 55–61 Read article
-
THE STUDY OF BURNING CHARACTERISTICS OF AP/HTPB/AL BASIC COMPONENTS OF A COMPOSITE PROPELLANT
Abstract: Starting the research on a solid propellant would be very much easier if the burning characteristics of a simple propellant is known. A simple propellant is a propellant made of three basic components namely oxidizer, fuel and binder without any additive substance to alter its characteristics. Unfortunately, a very limited number of references were published discussing the burning characteristics of simple propellant. This paper describes the burning characteristics of basic …
Published in Journal of Aerospace Engineering & Technology · Vol. 1, Issue 1, 2011 Read article
-
Characterization of Tabletting Properties of Mango Gum
Abstract: The aim of the study is to elucidate the physical, thermal, sorption, and functional properties of a mango gum obtained from the stem of Mangifera indica were characterized viz. elemental analysis, Fourier transmittance infrared, particle size analysis, thermogravimetric analysis, differential scanning colorimetry, scanning electron microscopy, and X-ray powder diffraction. Mango gum had a glass transition temperature (Tg) and melting peak of 90 and 318.795°C, respectively. This material showed a 14.59% …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 1, Issue 2, 2014 · pp. 22–30 Read article
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
Lignin-modified bitumen: Exploring characteristics and performance
Abstract: The surge in crude oil prices has sparked interest in finding efficient and cost-effective alternatives to bitumen, a binder used in road pavement. Bitumen, derived from crude oil distillation or natural deposits, is primarily utilized in pavement grade bitumen, accounting for 83% of its usage. However, traditional hot mix asphalt, which relies heavily on bitumen, emits significant amounts of CO2, CH4, and N2O, contributing to environmental concerns. To address these …
Published in Journal of Petroleum Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 24–30 Read article
-
Properties of Binary Waste Based Geopolymer Concrete Composite: A Review
Abstract: Concrete composite as construction material is utilized all over the world and it is not considered as eco-friendly because cement is provided as a binder in it. Therefore, replacing binder in concrete composite by alumina and silica rich by-products in presence of chemical activators give rise to geopolymer concrete composite which is eco-friendly in nature. Geopolymer concretes composite can be used to build a variety of structural configurations, have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 44–52 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article