Search
406 articles for “Surface model”
-
Geo-chemical Analysis of Arsenic in Medium Aquifers and Its Relation with Physical Parameters: A Study of Ballia District, India
Abstract: The main objective of this paper is to assess the spatial variation of arsenic (As) in medium aquifer and to relate it with surface elevation and slope generated using Shuttle Radar Topography Mission (SRTM) satellite data and water table. Water samples were collected in both pre- and post-monsoon season in 2011. The analysis of water samples for As were carried out by using atomic absorption spectrophotometer (AAS). Total 33 water …
Published in Journal of Water Resource Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 38–50 Read article
-
Augmentation of Heat Transfer in a Trough Shaped Solar Collector Compared to Flat Plate Collector Using CFD
Abstract: Surface Enhancement plays a vital role in augmenting the thermal performance of flat plate collectors. In this paper, an attempt is made to explain in a comparative way the effect of surface geometry of solar flat plate collector having troughs with that of a normal collector. Flat plate collectors with and without troughs of dimensions 1 × 0.5 m is modelled in CATIA V5R19 and meshed using ANSYS ICEM CFD. …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 3, 2014 · pp. 1–7 Read article
-
New Methods for the Prediction of Multiphase Flow through Wellhead Choke in Gas-Condensate Reservoirs
Abstract: Abstract The wellhead chokes are installed in order to stabilize oil and gas flow rates in production and operation disciplines. Most of the existing empirically derived correlations and predictive models to estimate choke performance have been proposed for oil fields production and operational conditions, and particularly production systems and reservoirs involved with condensation of the gaseous phase still suffer from a detailed consideration on the development of reliable predictive models. …
Published in Journal of Offshore Structure and Technology · Vol. 4, Issue 1, 2017 · pp. 1–10 Read article
-
Enhanced Iron Removal in Experimental Iron Overload by Nanoniosomes of Desferrioxamine
Abstract: This preliminary study explores the feasibility of employing nanocapsules prepared from nonionic surfactant vesicles (niosomes) as a carrier for an iron-chelating agent, Desferrioxamine (DFO, Desferal), to enhance iron excretion from the body. The methodology consisted of creating an iron overload model in an experimental animal followed by measurement of iron excretion pattern in the urine by atomic absorption spectrophotometry. Niosomes were prepared with span 60: cholesterol:dicetyl phosphate by the lipid …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 5, Issue 1, 2014 · pp. 14–20 Read article
-
Statistical Optimization and Decolourization of Methyl Violet Using Peroxisdase from Radish
Abstract: Statistical optimization design based on Response surface methodology for the decolourization of methyl violet using peroxidase from radish (Raphanus sativus) was applied. Effect of four influencing parameters (pH, Temperature, Dye concentration, enzyme volume) on decolourization was studied using One Factor At a Time (OFAT) method. The factors were optimized using RSM based on Box- Behnken design and analyzed for its significance through Analysis of Variance. The optimized operating conditions for …
Published in Journal of Water Pollution & Purification Research · Vol. 1, Issue 1, 2014 · pp. 20–29 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
3D Printable Polymer Nanocomposites: Challenges, Availability and Future
Abstract: Three-dimensional (3D) printing technology is evolving rapidly, with various materials used during the process. One of the most recent advancements in this area is the use of polymer nanocomposites for fused deposition modelling (FDM) printing. Polymer nanocomposites have a great potential due to their unique properties such as high strength, stiffness, excellent thermal and electrical properties as well as superior surface finish. But there are also some challenges associated with …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 38–55 Read article
-
Formulation and Evaluation of Solid Lipid Nanoparticles of BCS Class II Drug
Abstract: In the present study, we explored the potential of antihypertensive drug loaded solid lipid nanoparticles (SLNs), as a new formulation in improving the oral bioavailability of drug, which otherwise reported with poor bioavailability. The problem of poor water-solubility has remained as a significant challenge in pharmaceutical industry. The reduction of drug particle to the nano-level increases the surface area and improves solubility and dissolution of drug and proportionate increase in …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 6, Issue 2, 2019 · pp. 32–54 Read article
-
Flow Reversal and Pressure pulsation: Innovative technique to enhance flux in Nanofiltration
Abstract: Reduction in Permeate flux with the period of time is the major drawback for the Pressure-driven membrane processes. Concentration polarization and membrane fouling are the two major limitations for the Pressure-driven membrane filtration processes. They lead to the severe flux decline and that need to be controlled for the better process efficiency. The resistance determination provides basis for selection of membrane and appropriate pressure –driven separation process. This paper outlines …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
Engine Performance Analysis of Cottonseed Based Biodiesel Using Design Expert Statistical Based Tool
Abstract: Biodiesel is a biofuel acquired by substance forms from vegetable oils or creature fats and liquor that can be utilized in diesel engines alone or mixed with diesel oil. It is characterized as the mono-alkyl esters of unsaturated fats got from vegetable oils or creature fats. In basic words biodiesel is the item that gotten when vegetable oil or creature fat is artificially responded with a liquor to deliver unsaturated …
Published in International Journal of Industrial and Product Design Engineering · Vol. 1, Issue 1, 2023 · pp. 1–5 Read article
-
Comparison Analysis of Transformer Boosting and Induced Degeneration Topology Design of LNA for Millimeter Wave Frequency Range Using Polymeric Substrates
Abstract: In this study, a comparison between transformer boosting and source degeneration LNA topologies is conducted using two polymeric substrates—Polyimide (PI) and Liquid Crystal Polymer (LCP)—for millimeter-wave (mmWave) applications. With growing interest in flexible and high-frequency electronics, polymeric materials offer unique advantages such as low dielectric constants, mechanical flexibility, and thermal stability. The analysis explores gain, return loss, and noise figure performance while evaluating the influence of dielectric properties on the …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 2, 2025 · pp. 1–24 Read article
-
Estimation of Soil Erosion Using GIS in Pune District, Maharashtra
Abstract: The Varandha Ghats pans approximately 14.62 km 2 , where changes in temperature, vegetation, topography, and soil characteristics are causing continuous soil erosion. Catchment heterogeneity and climatic variations cause spatial variability in hydrological processes. Differences in land use, soil type, topography, and rainfall patterns influence how water moves and accumulates across regions, resulting in diverse hydrological responses. This complexity challenges accurate modeling and effective water resource management strategies across variable …
Published in Journal of Remote Sensing & GIS · Vol. 16, Issue 2, 2025 · pp. 26–33 Read article
-
Strategic Optimization of CNC Machining in Production Systems: A Managerial Review of Methods, Metrics, and Industry 4.0 Integration
Abstract: Computer numerical control (CNC) machining has significantly influenced modern production systems by enabling higher efficiency, quality, and sustainability. As industrial operations strive for leaner production and strategic competitiveness, optimization of machining parameters—including cutting speed, feed rate, depth of cut, and tool path strategies—has emerged as a cornerstone of production planning. This review evaluates the optimization methodologies developed from 2015 to 2025, spanning traditional mathematical models to artificial intelligence (AI)-driven metaheuristic …
Published in Journal of Production Research & Management · Vol. 15, Issue 2, 2025 · pp. 25–30 Read article
-
The theoretical study of behavior of the gas bubble, fixed on the surface of a solid material, under simultaneous changes of the surface tension on the border section of the phases of the fluid-gas and contact angle
Abstract: In the practice of ore and particular coal flotation, the injection of oils (nonpolar reagents) into the flotation pulp intensifies the process of the flotation, separation of the particles of different minerals, and contributes of extraction into the foam product considerably of the larger and heavier particles, no floating before. However, conducted studies to present time do not permit to explain significant strengthening of contact between the bubble and the …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 17–28 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Mathematical Modelling of an Unbalanced Rotor Subjected to Transverse Vibrations
Abstract: The static and dynamic balancing of a rotor plays a very important role in deciding the life-span of any turbo-machinery which is running at a very high speed. The major problems which face during the running of turbo machineries are unbalancing of the rotor. Rotor unbalance may be due to wrong selection of the manufacturing process, method of manufacturing, wear and tear of rotating component, thermal deformations, deposition of material …
Published in Trends in Machine design · Vol. 7, Issue 1, 2020 · pp. 9–16 Read article
-
Modeling Deformation Mechanisms of Horseshoe Tunnel Excavation In Layered Ground Using Flac 3D
Abstract: In the modern era of civilization, the transportation sector plays a pivotal role in a nation's development. Efficient transportation networks are essential for economic progress, and tunnels are particularly valuable in this regard, as they help reduce travel time and fuel consumption. With growing interest in underground infrastructure, researchers are increasingly focusing on tunnel-related studies. This paper examines the deformational behavior of a horseshoe-shaped tunnel constructed in layered soil, subjected …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 46–61 Read article
-
Use of Response Surface Methodology to Optimize the Formulation of Rice based Gluten Free Bread and Its Characterization
Abstract: The formulation for gluten free bread was optimized on the basis of specific volume, crumb firmness and overall acceptability of the bread. A rotatable central composite design (CCRD) was applied on three control variables viz. xanthan gum, extruded rice flour and corn starch varying within the range (-α to +α) of 0.5–1.5%, 15–35% and 15–35% w/w, respectively. All three responses were significantly (p<0.05) affected by the combinations of independent variable. …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 3, Issue 2, 2014 · pp. 1–11 Read article
-
Boiling Heat Transfer Enhancement on Macro-, Micro- and Nano-scales
Abstract: This paper presents a review of investigations on boiling heat transfer enhancement on macro-, micro- and nano-scale surfaces and fluids by the authors at the Moscow Power Engineering Institute (MPEI) plus known results of other researchers. These investigations were conducted with the purpose of increasing safety and efficiency of power generating systems. The investigations were focused on such problems as effective cooling at high heat flux (1 MW/m2 and more), …
Published in Journal of Nuclear Engineering & Technology · Vol. 2, Issue 2-3, 2012 · pp. 1–10 Read article
-
Thermal Analysis of Piston
Abstract: Analysis of thermal changes of piston, in an automobile an engine is heart of automobile likely in engine that actual mean to piston, who having very important role in the engine, Piston is always subjected to various loads mainly subjected to thermal and mechanical stresses. The role of piston is very clear i.e. transmit or the guide the piston rod which is connected to crankshaft while transmitting piston has to …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 9, Issue 4, 2022 Read article