Search
152 articles for “load combination”
-
Analysis and Design of Pre-Engineering Building Structure by Using Staad Pro Software
Abstract: The analysis and design of a Pre-Engineered Building (PEB) were conducted using STAAD Pro software, alongside manual calculations for accurate load estimation, to ensure the building's compliance with relevant engineering standards and codes. The evaluation took into account multiple load types, including dead loads, live (imposed) loads, wind loads, and relevant load combinations to replicate actual conditions the structure might face during its lifespan. This comprehensive approach provided a deep …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 3, 2024 · pp. 1–7 Read article
-
Soil Around the Pier Below the Bed Level of River
Abstract: This study presents the evaluation of vertical and lateral loads acting on a bridge pier–pedestal system subjected to self-weight and vehicular loading. The pier, having a height of 25 m, length of 20 m, and thickness of 1 m, was found to carry a self-weight of 1200 t. When combined with a vehicular load of 2000 t, the total vertical load on the pier becomes 3200 t. Considering lateral force …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 64–70 Read article
-
Thermo-mechanical Analysis of Orthotropic plate under Sinusoidally Distributed Thermal load by using Trigonometric shear Deformation Theory (TSDT)
Abstract: For the thermal analysis of simply supported square and rectangular plates applied to sinusoidal distributed linear thermal load throughout the plate thickness and in combination with sinusoidal distributed transverse mechanical loading, a trigonometric shear deformation theory is proposed. In this work, a sinusoidal function in terms of thickness coordinates is being used in the displacement field in conjunction with the transverse shear deformation effect. The normal and shear stress can …
Published in Journal of Experimental & Applied Mechanics Read article
-
Application of Artificial Neural Networks in Optimizing Polyhouse Roof Truss Design
Abstract: Polyhouses are specialised agricultural structures developed to maintain controlled environmental conditions for crop cultivation, thereby ensuring consistent productivity even under adverse climatic circumstances. The performance of these systems largely relies on the structural stability and cost efficiency of the roof truss, which must achieve an effective balance between strength, adaptability, and economy. In this research, an Artificial Neural Network (ANN)-based modelling framework is introduced to optimise the members of polyhouse …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 15–25 Read article
-
Analysis aspects of pressure tank: A review
Abstract: This review paper presents a detailed analysis of pressure vessels, focusing on finite element analysis (FEA) to evaluate structural integrity. Pressure vessels are widely used in industries such as chemical processing, power plants, and oil refineries, where they are subjected to extreme temperature and pressure conditions. Ensuring their safe and efficient operation requires a thorough understanding of stress distribution, deformation characteristics, and failure mechanisms. This study reviews existing research on …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 49–55 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Analysis for Pier of Railway Bridge
Abstract: The load-bearing capacity of a pier is determined by the combined effects of the load from the train and the self-weight of the girder it supports. The bending of the pier is influenced by its height, which necessitates a careful assessment of the pier's thickness across various girder spans and pier heights. This evaluation ensures that the pier can withstand the imposed loads while adhering to permissible deflection limits. By …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 37–43 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
POLYMER AND COMPOSITE-BASED GEOSYNTHETIC REINFORCEMENTS FOR SEISMIC STABILITY OF SOIL RETAINING STRUCTURES: MATERIALS, MECHANICS, AND PERFORMANCE REVIEW
Abstract: Geosynthetic materials based on polymer and composites have become important items for the structural performance and seismic resilience of the reinforced soil retaining systems. Mechanically stabilized earth walls in recent geotechnical engineering practice are increasingly based on enhanced polymeric reinforcements for enhanced tensile strength, durability, flexibility, and energy dissipation under dynamic loading. High-density polyethylene, polypropylene, polyester, and fiber-reinforced polymer composites are usually used. The present review focus on the recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Advanced Energy Metering and Automated Control System
Abstract: In this paper need for energy efficiency especially combining smart metering with control of load and prepaid billing becomes insistent. An ESP32-based Advanced Energy Metering and Automated Load Control System, is presented in this paper taking advantage of an IoT-capable smart meters, real-time data analytics, motion detector-based automation scheduling, Real-time clock (RTC) module-enabled scheduling, and GSM based prepaid billing notifications. The central controller, responsible for real-time energy monitoring, automated load …
Published in Journal of Control & Instrumentation · Vol. 17, Issue 2, 2026 Read article
-
Solar Sentry: Solar Power Module with Border Alert System for Fishing Vessel
Abstract: Fishermen are being caught and killed by the naval forces of the neighboring country, due to the lack of awareness about the ocean frontiers and advanced alert instruments in the boats. For this reason, maritime security has become a major concern of all coastal areas to protect the fishermen and provide assistance about sea frontiers via alerting, tracking, and monitoring of boat vessels. Thereby, a path-breaking technology of maritime border …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 2, Issue 2, 2024 · pp. 1–6 Read article
-
Design and Analysis of G+4 Building with Ductile Detailing
Abstract: This study presents the structural design and analysis of a G+4 residential building, with a specific focus on ductile detailing to enhance seismic performance. Ductility plays a crucial role in enabling structures to absorb and dissipate energy during seismic events, thereby minimizing structural damage and improving safety. The project emphasizes key reinforcement strategies such as beam-column junction detailing and confining reinforcement, which are critical to preventing brittle failures and improving …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Interfacial Bonding Efficiency in Jute-Carbon Fiber Polyester Matrix Composites Evaluated Through Short Beam Shear and Interlaminar Fracture Toughness Testing
Abstract: The natural Fiber–synthetic Fiber hybrid composites are jute–carbon Fiber hybrid in polyester matrix which could be used in semi-structural applications of automotive, construction and marine industry as an eco-friendly and cost-effective alternative of conventional carbon Fiber reinforced polymer. But the hydrophilic nature of jute Fibers and the relatively inert surface of carbon Fiber's cause weak bonding at the interface of the polyester matrix, which causes premature delamination, poor interlaminar shear …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Influence of Hybrid Fiber Reinforcement on the Interfacial Bonding and Fracture Toughness of Epoxy-Based Polymer Composites Under Cyclic Loading
Abstract: This study investigates the influence of hybrid fiber reinforcement on the interfacial bonding and fracture toughness of epoxy-based polymer composites under cyclic loading. Carbon, glass, and aramid fibers, both individually and in hybrid combinations, were incorporated into the epoxy matrix to evaluate their thermal, mechanical, and fatigue-resistant properties. Thermal characterization revealed distinct material behaviors, with carbon fibers exhibiting superior thermal conductivity, while glass and aramid fibers provided enhanced thermal stability. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 799–824 Read article
-
RFID Based Smart Trolley Billing System Using IoT
Abstract: Customers experience better retail interactions while operations become more efficient in the modernizing retail industry. Shopping through traditional methods requires lengthy manual scanning for products and billing operations leading retailers to require automation solutions for streamlining these processes. This system consists of RFID detection alongside 8051 microcontroller processing and load cells monitoring and uses IoT communications and relay controls to power an intelligent automated shopping cart. Real-time data tracking functions …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 3, 2025 · pp. 1–8 Read article
-
Comparative Study of Clamped-Clamped and Clamped-Free Elastic Beams Resting on Bi-Parametric Subgrades and Subjected to Concentrated Moving Loads
Abstract: In this paper, a comparative study of clamped-clamped and clamped-free elastic beams resting on bi-parametric subgrades subjected to concentrated moving load has been investigated. This work takes into account the viscous effects of the moving load. The findings are shown graphically. The methods of solution incorporate integral transformation in combination with convolution theory, a version of Struble's asymptotic approaches, and Fourier integral translate with the series representation of the Dirac-delta …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 17–33 Read article
-
Influence of the Load, Sliding Speed, and Weight Fractions on Wear of a Hybrid Aluminium Metal Matrix Composite
Abstract: The vital focus of the research is intended in examining the aspect that impact the rate of wear for a hybrid aluminium metal matrix composite. The percentages of two reinforcements that are employed, the weight, and the sliding speed are the variables taken. The procedure entails employing the vortex-stir casting process to produce the hybrid composite. Utilizing a pin-on-disc apparatus, the fabricated composite materials are evaluated in compliance with the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 188–198 Read article