Search
71 articles for “discontent”
-
Study of Strength of Composite Laminates with Ply- Discontinuities Using FEM
Abstract: Present research work attempts to understand the effect of ply-discontinuities on the strength of the FRP Composite. Finite Element Analyses have been performed for specimen undergoing four-point bend loading condition using ABAQUS software. Three specimens consisting of different ply sequences, same resin pocket size and location have been considered for the present analysis. Cohesive zone modelling technique is implemented to simulate and predict crack propagation pattern during failure of composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 89–98 Read article
-
Comparative Study of PSC Spun Pole using Higher Grade Concrete without and with Discontinuous Glass Fiber
Abstract: This experimental study was carried out on the prestressed concrete spun pole of length 13 m with and without use of anti-crack discontinuous glass fiber in high-strength concrete. The pole is having outer diameter at top and bottom as 206 mm and 379 mm respectively. The pole is having thickness 50~55 mm. The investigations were done to study the effect of use of high dispersion discontinuous glass fiber on deflection …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 1, 2014 · pp. 1–6 Read article
-
Fabrication of AA5182-Semis for Precise Components
Abstract: Al4.5MgMn alloy is known to show an excellent physical and mechanical properties as well as manufacturing and fabrication ease as semis, suitable for making precise components like hull of the light weight vehicles and seamless tubes. Present work has tried to describe the development of microstructure and texture of an industrial tandem hot rolled Al4.5MgMn alloy sheet after laboratory cold rolling and annealing. Crystallographic orientation dependent strengthening rate has been …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 3, 2021 · pp. 21–32 Read article
-
Seismic Response of Multistoreyed Building for Different Stiffness Conditions
Abstract: Many buildings in the present scenario have irregular configurations both in elevation and plan. This in future may subject to devastating earthquakes. It is necessary to identify the performance of the structures to withstand against disaster for both new and existing buildings. Now a days, openings in the floors is common for many reasons like stair cases, lighting architectural etc., these openings in diaphragms cause stresses at discontinues joints with …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 22–26 Read article
-
Reengineering Engineering Education Through Total Quality Methodology
Abstract: Normal 0 false false false EN-GB X-NONE X-NONE This work attempts to build a case for the combo application of reengineering and TQM, for improving quality of the students (as a product). The holistic development of higher-order skills in them is investigated applying the concepts/tools. Addressing deficiencies of engineering education is a symptomatically pursued common minimum and continual program in which the imperative of job placement is most impressed upon. …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 35–50 Read article
-
INFLUENCE OF ASPECT RATIO, GEOMETRIC CONFIGRATION AND CONTINUTY ON SHEAR WALL PERFORMANCE
Abstract: This study investigates the dynamic behavior of shear walls in high-rise buildings, focusing on the impact of varying parameters like aspect ratio, geometry, and continuous-discontinuous structures. By accurately identifying and quantifying various loads and conducting comprehensive structural analysis. The high-rise complex features reinforced concrete shear walls designed to resist lateral forces, ensuring safety and stability.This topic is chosen because the dynamic behavior of shear walls in high-rise buildings is critical …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 26–40 Read article
-
Performance Analysis of Bridgeless Converter Based SMPS used for Welding Application
Abstract: Abstract: This paper deals with performance analysis bridgeless converter based switched mode power supply (SMPS) of improved power quality. Power Factor Correction (PFC) based bridge less SMPS having so many applications in the area of welding power supply with IPC. This topology based on the constant voltage output and output current varied according to load changes. In the proposed topology, it is replaced the front end diode bridge rectifier with …
Published in Journal of Electronic Design Technology · Vol. 10, Issue 1, 2019 · pp. 27–33 Read article
-
Harmonic Analysis for Different PWM Techniques
Abstract: In this paper, harmonic analysis of different pulse width modulation algorithms for induction motor drives is presented. This paper uses the PWM techniques such as conventional SVPWM, discontinuous PWM, simplified SVPWM and digital SVPWM. In this study, the conventional SVPWM and discontinuous PWM requires the angle and sector information but the simplified SVPWM uses the imaginary switching times which can be obtained from the reference voltages. In this study, the …
Published in Trends in Electrical Engineering · Vol. 6, Issue 1, 2016 · pp. 26–31 Read article
-
Detect the Edges in Satellite Image Using CED Algorithm
Abstract: Edge detection is that the name for a collection of mathematical strategies that aim at distinguishing points in a very digital image at that the image brightness changes sharply or, a lot of formally, has discontinuities. The points at that image brightness changes sharply square measure generally organized into a collection of flexuous line segments termed edges. Constant drawback of finding discontinuities in 1D signal is understood as step and …
Published in Research & Reviews: Discrete Mathematical Structures · Vol. 2, Issue 3, 2015 · pp. 30–35 Read article
-
Pharma Guard: Smart Medication Management System
Abstract: Pharma Guard Smart Medication Management System presenting a comprehensive overview of an innovative technology designed to revolutionize medication management in healthcare settings. In an era of advancing digital solutions, the Pharma Guard system offers a sophisticated approach to ensuring medication safety and adherence. Through the integration of smart technology, including internet of things (IoT) devices and machine learning algorithms, Pharma Guard enables real-time monitoring, tracking, and management of medication consumption …
Published in International Journal of Mobile Computing Technology · Vol. 2, Issue 1, 2024 · pp. 30–37 Read article
-
Experimental, Analytical and Numerical Study of Energy Absorption Properties of Aluminum Crush Boxes with and without Buckling Initiators (Axial Loading)
Abstract: The crashworthiness in automobile is stated as the capability of a passenger car and its interior arrangements to safe-guard occupants from harm. Whenever an accident occurs, the passengers in the car can be injured due to one of the following reasons: (1) excess acceleration force; (2) physical injury from contact with injurious surfaces, and; (3) exposed to fire, smoke, and chemicals released during accidents. Thus effective crashworthiness design must take …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 1–9 Read article
-
Seismic Induced Landslide Vulnerability in the Chittagong City, Bangladesh
Abstract: Chittagong is the second largest city of Bangladesh and evidences of hundreds of earthquakes that jolted this city and its surrounding areas. In this paper, we show the cause of slope failure in Chittagong city with the response of earthquake (seismic) activity. We have collected four in-situ samples from each of the upper and lower layers, i.e., eight samples from each of the seven different locations (Motijharna, Tankir Pahar, Batali …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 1, 2015 · pp. 1–13 Read article
-
DC and RF Analysis on Specific Quantum-Well Heterostructures
Abstract: Polarization-graded AlGaN back-barrier nano-layer is introduced in high electron mobility transistor (HEMT) structure to have an improved drain current characteristics and better radio-frequency performance, using two-dimensional drift-diffusion simulation by SILVACO-ATLAS physical simulator. In this work, the AlGaN/AlN/GaN/AlGaN/GaN double heterojunction HEMT structure is optimised with graded back barrier layer to study the DC and RF performances. Investigation of this structure with graded back barrier layer is the novelty of this work. …
Published in Journal of Semiconductor Devices and Circuits · Vol. 9, Issue 1, 2022 · pp. 1–13 Read article
-
LabView Based Control System Design for Water Tank Heater System
Abstract: This paper presents the control system design for water tank heater system (WTHS) with the help of LabVIEW and Arduino UNO R3 based Atmega328 microcontroller to regulate the temperature of water inside the water tank heater system to a certain reference value. In the process control system, the accurate measurement of the temperature is not an easy task. The aim of this work is to develop a low-cost and flexible …
Published in Trends in Electrical Engineering · Vol. 7, Issue 3, 2017 · pp. 31–40 Read article
-
DRX and DTX Algorithms at BS and UE for Minimum Power Consumption in LTE Network
Abstract: Power in any cellular network is a key degree in management of connectivity, energy factors, speed etc. In LTE network the power consumption is dominated at evolve node. To compute this issue a mechanism has been proposed to reduce the power consumption at evolve node. This issue is tackled by discontinuous transmission (DTX) mechanism where the evolve node is switched off for specified amount of time when there is no …
Published in Journal of Advancements in Robotics · Vol. 2, Issue 2, 2015 · pp. 26–32 Read article
-
Integrated Maximum Power Point Tracking and Harmonic Reduction in a Grid Interactive Solar PV Inverter
Abstract: Normal 0 false false false EN-US X-NONE X-NONE A solar photovoltaic (PV) cell exhibits a non-linear i-v characteristic and its maximum power point (MPP) varies with solar insolation and temperature. A dc-to-dc converter is generally employed along with inverter circuit to operate the solar PV system at maximum power point. This adds to the cost, which increases significantly with the size of the system. Moreover, grid-tie inverter employing thyristors has …
Published in Journal of Instrumentation Technology & Innovations · Vol. 4, Issue 1, 2014 · pp. 7–15 Read article
-
Seismic Retrofitting of Floating Column Building with Fluid Viscous Dampers and Structural Bracings by using Fast Non-linear Time History Analysis
Abstract: In some of the building structures, even in the newly constructed one, floating columns are used to achieve an aesthetic view or to satisfy the space requirement criteria of building areas like reception lobbies, parking spaces, conference rooms in malls etc. With the use of proper design considerations, buildings built with floating columns, which otherwise are not advised by the codes, can withstand vertical loads, i.e., gravity loads and live …
Published in Journal of Offshore Structure and Technology Read article
-
Failure Analyses of 16 mm Thick SA 516 GR 70 Auto Clave
Abstract: With the acceleration of global industrialization, there is a demand for high-or low-pressure storage of liquids or gases. Because of the complicated operating conditions that will inevitably encounter a possible hazard, pressure vessel design is a critical responsibility. Previous failure studies have revealed that the presence of local loads and discontinuities increases pressure vessel fracture. As a result, a detailed examination of pressure vessel steel from the standpoint of fracture …
Published in Trends in Mechanical Engineering & Technology · pp. 21–30 Read article
-
Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications
Abstract: The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting metal-insulator transition (MIT) behavior at a particular frequency at ambient temperature. Other substances, like two-dimensional (2D) transition metal dichalcogenides (TMD), vanadium oxide (VO2), and germanium telluride (Ge-Te), have difficult challenges in achieving effectively the MIT property at a given frequency and temperature. It is also difficult to …
Published in Journal of Polymer & Composites Read article
-
Evaluating Epidemiological and Physical Risk Factors in the Development of Chemotherapy-induced Peripheral Neuropathy (CIPN): An In-depth Systematic Review and Meta-analysis
Abstract: Background of study: Chemotherapy-induced peripheral neuropathy (CIPN) encompasses a range of adverse effects caused by various cytotoxic medications and stands as a primary source of pain among individuals who have survived cancer. In instances of pronounced and sudden CIPN, it might become necessary to diminish chemotherapy dosages or discontinue their application. Currently, no efficacious strategy exists for proactively preventing CIPN, managing established chronic CIPN is constrained, and the risk factors …
Published in International Journal of Oncological Nursing and Practices · Vol. 1, Issue 2, 2023 · pp. 10–21 Read article