Search
87 articles for “Strip”
-
A Novel High Gain Cavity Backed Micro Strip-Fed Circular Triangular Corner Fractal Antenna for UWB Applications
Abstract: In the current article, a novel micro strip-fed circular triangular corner fractal unidirectional antenna with high gain is proposed for ultra wideband (UWB) applications. This antenna consists of circular patch with triangular slot with three iterations. A prototype of antenna has been designed on FR4 substrate having dielectric constant 4.4 and thickness 1.6 mm. This reference antenna is then placed in a cavity made up of FR4 having thickness same …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 19–24 Read article
-
Participatory Demonstration of Grass Strips as Biological Soil and Water Conservation Measures in Kamba Woreda, South Ethiopia
Abstract: Land degradation due to soil erosion and soil fertility depletion is a significant threat to the agricultural system, limiting food security and sustainable agricultural production. This study demonstrated Desho grass strips as biological soil and water conservation measures in Kamba woreda Gamo zone south Ethiopia. Six (6) nearby trial farmers who took part in the demonstration directly were chosen for the study using the purposive sample technique. Sole maize and …
Published in International Journal of Land · Vol. 1, Issue 1, 2024 · pp. 1–10 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
Design and Simulation of E-Shape Micro-strip Patch Antenna at 2.45GHz
Abstract: AbstractThis paper presents comparison of rectangular micro strip patch antenna and E-Shaped micro strip patch antenna operating at 2.45GHz. Two parallel slots are made into the basic rectangular patch design of micro strip antenna which resulted into desired E-shaped patch. The basic design consist of inset feed type and we have used dielectric substrate Fr4 epoxy whereas E-shaped patch consist of coaxial probe and RT Duroid as substrate. Both the …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 17–24 Read article
-
Axial Load Carrying Capacity of RCC Column Jacketed with Steel Angels and Steel Strips
Abstract: An The Purpose of this research is to study & analyze the existing structures of Factory shed which is almost 32 years old which is deteriorated and not in working from 20 years. Due to non-working condition of factory shed, steel truss and other structural parts are not maintained time to time as results the structural members are corroded and RCC members are deteriorated. Hence the existing column is retrofitted …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 2, 2023 · pp. 1–12 Read article
-
Performance Evaluation of PET Strip Fiber Reinforced Concrete
Abstract: Polyethylene Terephthalate, commonly known as PET, is a petroleum-based plastic polymer that is widely used in the packaging of various commodities due to its durability, and poses a major threat to the environment. To tackle this scenario, the construction industry is researching all possibilities to incorporate this waste into concrete and enhance the properties of concrete. The present study evaluates the performance characteristics of M 30 grade concrete when reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1076–1088 Read article
-
Pseudo-Static Limit Equilibrium Method for Bearing Capacity of Footing on Slope and Seismic Uplift Capacity of Horizontal Strip Anchor
Abstract: Seismic bearing capacity for a shallow strip footing embedded in a sloping ground is derived along with seismic uplift capacity of horizontal strip anchors. c-ϕ soil medium is used with limit equilibrium method of analysis. A planar failure mechanism has been adopted. The seismic bearing capacity is determined in the form of a single pseudo-static bearing capacity coefficient (Nγe) in association with unit weight, surcharge and cohesion, which becomes more …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 18–31 Read article
-
Stress Distribution below Strip Footing Using Finite Element Analysis
Abstract: The estimation of stress distribution below ground is important in all types of geotechnical analysis. That is why the correctly measured value of stress distribution below ground level under various conditions will be helpful for resilient design in geotechnical point of view. This paper presents an analysis of vertical stress distribution below a strip footing due to varying applied loads using finite element method (FEM) modeling in ABAQUS and the …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 3, 2016 · pp. 16–22 Read article
-
Participatory Demonstration of Desho and Elephant Grass Strip as Biological Soil and Water Conservation Measures for Erosion Control
Abstract: Participatory demonstration and pre scaling up of biological soil conservation measures (desho andelephant grass)compared with control (without grass) works were conducted in 2011/12 E.C on three beneficiary farmers field by the main objective is contribution of biological conservation measures for controlling soil erosion and assessing farmer perception on these measures. The data were taken from 132 m2 trail area. Average soil loss data that were obtained from Elephant grass 6.6 …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 13, Issue 2, 2024 · pp. 01–08 Read article
-
Reviewing the Effect of Waste PET Strips as Fiber Reinforcement in Concrete
Abstract: Polyethylene Terephthalate also known as PET is the most commonly and widely used petroleum polymer plastic in the packaging industry. It is a well-established fact that the non-biodegradability of all plastics is a hazard to the environment. Thus, effective management of this waste is necessary. Numerous researchers have carried out studies and attempts to incorporate this plastic waste into concrete for performance enhancement. Considering the possible utilization of this waste …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 166–177 Read article
-
A Compact Design of Dual Band Micro Strip Antenna for WLAN/WiMax Applications
Abstract: In this paper compact dual wide band micro strip antenna has been designed with line feed technique. The return loss bandwidth achieved is 12.34% (1.398–1.582) GHz and 21.56% (2.395–2.974) GHz with a maximum return loss –44.89 dB at resonant frequency 2.656 GHz by using Zeland IE3D software. The fabricated line feed patch antenna is tested and measured by using spectrum analyzer.
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 1–6 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
A Strip Feed Compact UWB Antenna with Triple Band Notched
Abstract: In this paper, a microstrip feed Ultrawide Band (UWB) antenna with triple notch band characteristic has been proposed. The proposed antenna has U-shaped stub on the radiating patch. The proposed antenna reduces the interference between UWB and WiMAX/WLAN/ITU. The propose antenna has a compact size of 26 x 27 mm2. The proposed antenna achieved an operating bandwidth (VSWR<2) from 2.68 to 12 GHz except notch band 3-3.85 GHz (WiMAX), 5-5.9 …
Published in Current Trends in Signal Processing · Vol. 7, Issue 1, 2017 · pp. 1–7 Read article
-
A Strip Feed Compact UWB Antenna with Triple Band Notched
Abstract: In this paper, a microstrip feed Ultrawide Band (UWB) antenna with triple notch band characteristic has been proposed. The proposed antenna has U-shaped stub on the radiating patch. The proposed antenna reduces the interference between UWB and WiMAX/WLAN/ITU. The propose antenna has a compact size of 26 x 27 mm2. The proposed antenna achieved an operating bandwidth (VSWR<2) from 2.68 to 12 GHz except notch band 3-3.85 GHz (WiMAX), 5-5.9 …
Published in Current Trends in Signal Processing · Vol. 7, Issue 1, 2017 Read article
-
Rectangular Micro Strip Patch Antenna Interconnected with Symmetrical Cut Hexagonal Shaped between Horizontal Lines Meta Material Structure Enhancement Bandwidth at 1.80 GHz
Abstract: This paper proposes a new generation of antenna that applies Metamaterial (MTM) properties at ground plane. The paper analyzes the performance of Microstrip Patch Antenna with and without using the MTM structure. Rectangular Microstrip Patch Antenna (RMPA) interconnected with symmetrical cut hexagonal shaped between horizontal lines MTM structure is proposed for enhancement of bandwidth and reduction of return loss at operating frequency of 1.80 GHz. The proposed antenna is designed …
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 15–20 Read article
-
Twin Roll Casting of Aluminum Alloy AC7A
Abstract: Twin roll casting process is able to produce a strip from molten metal directly. Thus this process has a possibility to reduce total cost of sheet making comparing to conventional rolling process. Strip casting process has some disadvantages. Casting speed depends on the material properties. It is difficult to determine the casting conditions. Twin roll casting of aluminum alloy AC7A using commercial scale machine was operated. The aims of this …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 30–36 Read article
-
An Innovative Technique for Soil Improvement by Polythene Waste
Abstract: This study investigated the possibility of making use of polyethylene buying baggage waste to boost soils to pave way for its use in civil engineering projects together with in street bases, embankments and slope stabilisation. A chain of direct shear tests become undertaken on soil-plastic composites of decided on sandy soils: Klipheuwel and Cape residences sands. Strips of shredded plastic cloth had been used as reinforcement inclusions at concentrations of …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 2, 2016 · pp. 7–11 Read article
-
A Review On A Compact Dual Polarized Antenna Array
Abstract: A compact dual-polarized antenna array for low-cost millimeter-wave (mm Wave) applications is proposed in this article. Utilizing a patch antenna with two orthogonal feeds positioned horizontally and vertically, a dual linear polarization antenna can be created. Two ports—a vertical port and a horizontal port—make up the suggested design. The antenna produces horizontal polarization by stimulating the horizontal port. The antenna produces vertical polarization by stimulating vertical port. With the higher …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 46–50 Read article
-
Thin-in-slab-in-caster to Pursue Heat-in-treat
Abstract: This paper is to resolve the latest scenario in slab caster to suggest fabrication of slab after integrating as well successive next add an addendum formation to end production. Direct thin section produced from existing heat in cast thin slab has been utilized by successive roll reduction and also heat treatment. Endless strip processing (ESP) has linked continuous thin down formation to subject modification of microstructure from as cast to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 30–37 Read article
-
Soft Computing Based Prediction of Deviator Stress of Waste Plastic Reinforced Sand
Abstract: In the recent past, the soft computing techniques have received a significant attention for solution of the geotechnical stability problems. Following the trend, the present study tries to explore the use of different soft computing techniques such as random forest regression, support vector machines (SVM) RBF kernel, SVM poly kernel and M5P model tree for the prediction of deviator stress of sand reinforced with waste plastic strips. The deviator stress …
Published in Journal of Geotechnical Engineering · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article