Search
67 articles for “Layer thickness”
-
Influence of Dielectric and Active layer Thickness on MgZnO Thin Film Transistor Electrical Characteristics
Abstract: From last decades, Thin Film Transistors Technology uses low-k dielectric material as an insulator. Insulator thickness plays an important role in device dimension. The insulating layer also known as the gate oxide separates the gate electrode from the channel region of the transistor. If the insulating layer is too thin, there is a greater chance that electrons can tunnel through the oxide layer, leading to leakage current. To mitigate this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 5, 2023 · pp. 17–26 Read article
-
Investigating the Combined Effect of FDM 3D Printing Parameters on Tensile Behavior of ABS Plastic Using Taguchi Method.
Abstract: Fused Deposition Modelling (FDM) is a commonly utilized method in additive manufacturing. FDM is greatly affected by its printing parameters, which is why selecting the proper parameters is crucial for obtaining the desired properties of 3D printed parts. In this paper we have experimentally and statistically studied the influence of FDM 3D printing parameters (infill pattern, infill density and layer thickness) on tensile strength using Acrylonitrile Butadiene Styrene (ABS) filament. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 161–169 Read article
-
Study of Perovskite (CH3NH3PbI3) Solar Cell using CuI (Copper Iodide) as Hole Transport Layer (HTL) at different thickness of HTL layer
Abstract: While solar energy is a viable option, future clean energy solutions may require other energy sources. Renewable electricity sources are known for being affordable, easy to access, and not producing greenhouse gases. Photovoltaic cells, which turn sunlight into electrical power, are a good choice. Over the last twenty years, advancements in photovoltaic technology have lowered costs and improved the efficiency of solar cells. Perovskite materials, recognized for their unique crystal …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 2, 2024 · pp. 1–11 Read article
-
Structural Assessment of Rigid Pavement Systems Under Heavy Loading Conditions
Abstract: This study presents an analysis of pavement and foundation layer design subjected to heavy vertical loads and upward soil pressure. A total load of 1716 tonnes transmitted from the superstructure is considered acting on the pavement system. Due to upward soil pressure, tensile stresses develop in the foundation layers, requiring adequate thickness of sand and aggregate layers to ensure structural stability. Based on the tensile strength of sand (2 N/mm²), …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 36–48 Read article
-
Evaluation of Mechanical Properties of Carbon Reinforced Composite for Different Process Parameters Using FDM
Abstract: Fused Deposition Modeling (FDM) stands as an advanced rapid prototyping technique, widely appreciated for its efficiency in constructing functional components within a reasonable timeframe. In this experimental exploration, a comparative analysis of mechanical properties was conducted on components manufactured through the FDM technique, specifically with a 20% concentration of SCF-PLA. The study considered process variables like layer thickness, infill pattern, and infill density. Employing diverse process parameters, a standard sample …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 218–228 Read article
-
Optimization of a new Bebq2/BCP-based OLED structure for optimum performance
Abstract: Opto-electronic devices exhibit highly nonlinear current–voltage (I–V) characteristics that significantly affect charge injection, transport, and recombination, evaluating their performance remains a difficult challenge. Device optimization is a key research goal in organic light-emitting diodes (OLEDs), as the thickness and arrangement of individual functional layers greatly influence electrical and optical responses. For a suggested Bebq2/BCP-based OLED structure, this work methodically examines the movement of charge carriers, their transport behavior, and the …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Dimensional Investigation of Material Extrusion Based AM Part
Abstract: Now a day’s additive manufacturing plays a vital role in industrial application. Material Extrusion based 3D printed parts often face inherent limitations in quality, such as geometric inaccuracies, surface roughness, and reduced strength, especially when compared to those made through traditional or more refined manufacturing methods. However, this system provides notable advantages for producing parts from materials like ABS by optimizing critical material extrusion based AM machine process parameters, such …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 442–452 Read article
-
Effect of Thickness of Absorber Layer on the Enhancement of Efficiency, and Performance of CH3NH3SnI3 based Perovskite Solar Cell using SCAPS-1D
Abstract: The present research article deals with the improvement of efficiency, and performance of tin based perovskite solar cells (PSCs) using SCAPS-1D software. SCAPS-1D has been used for investigating the absorber layer of the inverted p-i-n arrangement of tin based perovskite solar cells. The inverted p-i-n solar cell arrangement are Glass/ITO/NiO/CH3NH3SnI3/ PCBM/AL where ITO, NiO, CH3NH3SnI3, PCBM and Al are transparent conducting oxide, hole transporting layer (HTL), absorber layer and electron …
Published in Journal of Nanoscience, NanoEngineering & Applications Read article
-
Tailoring the Compressive Behavior of Tetra-Chiral Auxetic Structures through FDM Process Parameters
Abstract: This research evaluates how fused deposition modeling (FDM) fabrication process parameters affect the compressive behavior of tetra-chiral auxetic structures created from Polylactic Acid (PLA). Auxetic materials have a number of useful properties, including reversible deformation and high-energy absorbing capabilities, which are beneficial to creating ultra-lightweight structural, protective, and shock-resistance designs. Among the available auxetic topologies, the tetra-chiral configuration is particularly attractive for engineering use, because its rotation-dominated node–ligament deformation gives …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Effect of 3D Printing Process Parameters on the Tensile Strength of Polylactic Acid (PLA)
Abstract: This study employs the Taguchi approach to systematically analyze and optimize critical Fused Deposition Modeling (FDM) parameters, focusing on their effect on the tensile strength of 3D-printed Polylactic Acid (PLA) components. The study explores three levels of layer thickness (0.15 mm, 0.25 mm, and 0.3 mm), infill densities (25%, 50%, and 75%), and nozzle temperatures (200°C, 205°C, and 210°C) across three infill patterns: Triangular, Gyroid, and Zig-zag. A total of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 128–140 Read article
-
Parametric Study of Laser Drilling Process Using Multi Variable Regression Analysis
Abstract: The laser drilling process is an advanced manufacturing technique extensively employed for intricate and high-value components in aerospace, automotive, and electronics industries. Laser drilling technology offers opportunities to meet the contemporary demands of industries using a broad spectrum of engineering materials. However, this process encounters several engineering challenges such as thermal damage, dimensional inaccuracies, and the formation of a recast layer in the drilled components. This study focuses on examining …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1000–1015 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Analysis of Perovskite (CH3NH3PbI3) Solar Cells Using Cu2O as a Hole Transport Layer (HTL) with Varying ETL Thickness
Abstract: Solar cells offer a viable option for creating new clean energy solutions, though they may require supplementary energy sources. Renewable electricity sources, known for being affordable, accessible, and greenhouse gas-free, are increasingly popular. Photovoltaic cells, which convert sunlight into electricity, stand out as an excellent choice. Over the past two decades, advancements in photovoltaic technology have significantly reduced costs and enhanced the efficiency of solar cells.[4] Perovskite materials, recognized for …
Published in Journal of Nuclear Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 38–48 Read article
-
Investigation on Tensile Properties of Redwood PLA Using FDM Process
Abstract: Fused Deposition Modeling (FDM) is an additive manufacturing technique employed to construct comprehensive 3-dimensional models using a variety of materials, catering to diverse applications. This study explores the fabrication of REDWOOD polylactic acid using (FDM) additive manufacturing processes. REDWOOD PLA, recognized for its biodegradability and renewable sourcing, holds promise as an eco-friendly material for 3D printing applications. The research investigates the tensile properties of REDWOOD polylactic acid (PLA) fabricated through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 668–673 Read article
-
Comparative Experimental Investigation of Infill Pattern and Infill Density on Fused Deposition Modeling (FDM) Process Characteristics of Polylactic Acid (PLA)
Abstract: Additive manufacturing is the potential and emerging technology widely being used to produce quality products with complicated profiles and customized features. Fused Deposition Modelling (FDM) process, a type of additive manufacturing technology using filament made of thermoplastic which is melted and subsequently extruded through nozzle. The main input process parameters of FDM are wall thickness, infill density, layer height, bed temperature, layer thickness, infill pattern, nozzle temperature etc. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 335–345 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
Enhancement of Flexural Strength in FDM-Printed Components through Taguchi-Based Process Parameter Optimization
Abstract: Additive manufacturing (AM), especially Fused Deposition Modeling (FDM), has emerged as a widely adopted and versatile method for producing three-dimensional components. The process involves the deposition of a thermoplastic filament in a semi-molten state, which solidifies in successive layers to form the final structure. While this method enables the production of complex geometries at relatively low cost, the printed parts often exhibit inferior surface quality and reduced mechanical performance compared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 272–280 Read article
-
A Review of the Properties of Electro Less Duplex Coatings with Different Outer Layers and Bath Preparations
Abstract: Electroless coatings are widely used now because of their outstanding tribological as well as physical qualities. The need for a coating or finished product with any of these attributes has increased over the past few years. As a consequence, there has been a rise in the amount of study and associated publishing production on the creation of various surface types and coverings with various components. This study gave rise to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 6–11 Read article
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Cretaceous–Tertiary Rift Basins of Northwestern Kenya: Tectonics, Stratigraphy, and Petroleum Implications
Abstract: This study looks at the potential for oil and gas in northwest Kenya, giving a broad overview of the geology, tectonic (earth movement) features, and underground rock layers in four main basins from the Cretaceous to Tertiary periods: Lotikipi, Lake Turkana, Lokichar–Kerio, and Chalbi. These are part of the larger East African Rift System. Recently, important signs of oil and gas structures have been found in the Lokichar Tertiary Basin …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 1, 2026 · pp. 25–54 Read article