Search
49 articles for “Electro deposition”
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
Experimental Investigation on Mechanical Characterization of Electrodeposited Shot Peened Copper Coated and Un-Coated Mild Steel
Abstract: The fatigue strength of fabricated copper coating on mild steel specimens under repeated loading and the overall number of cycles to failure has been investigated. The specimens of copper coating on mild steel substrate are fabricated by using an electro deposition shot peening method. The hardness behaviour of fabricated specimens studied and the experimental work has been carried out by using Vickers Micro Hardness under the load of 20N force. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 279–288 Read article
-
Electrodeposition and Magnetron Sputtering of Rhenium Coatings on Carbon-Carbon Composites for Enhanced Corrosion Resistance and Structural Integrity
Abstract: It is well known that tailored materials are gaining in-roads to aviation and other manufacturing industries where stringent requirements are to be met, due to high temperature erosion, which is a problem. In order to counter these issues, materials which can resist a very high temperature are to be sought. One of the several methods to combat this high temperature issue is to provide a metallic refractory material coating on …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 35–44 Read article
-
An Overview of Surface Coating Methodologies and Their Use in Technical Materials
Abstract: To safeguard the product or structure against chemical harm, a variety of procedures and materials can be applied in coating applications today. Nowadays, coatings are used extensively in manufacturing all over the world to increase efficiency and reduce expenses two factors that are essential to preserving the sector's profitability. Coated materials have greater strength compared to uncoated materials. A variety of materials, including bio glass, polymers, ceramics, strong and hard …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 19–35 Read article
-
Advancements in Thin Film Coatings for High-Efficiency Electronics and Communication Devices
Abstract: Thin film coatings have become integral to the development of high-efficiency electronics and communication devices, offering enhanced performance, miniaturization, and multifunctionality. This review delves into recent advancements in thin film technologies, focusing on their applications in semiconductors, optoelectronics, and communication systems. We explore various deposition techniques, including atomic layer deposition (ALD), chemical vapor deposition (CVD), and solution-based methods like spin coating, highlighting their impact on device efficiency and scalability. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 19–24 Read article
-
Aluminum based types of hydrophobic coatings for Engineering Materials: A Review
Abstract: Today's coating applications allow for the employment of a wide range of techniques and substances to safeguard products and structures from chemical and chemical harm. Coatings are now widely utilized in manufacturing across the globe to boost productivity and cut costs, both of which are crucial for maintaining the industry's profitability. Materials with coatings are stronger than those without coatings. Strong and hard metals, ceramics, bioglass, polymers, and plastic materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 113–133 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Advancements in Material Design and Motion Control: Integrating Additive Manufacturing, Fused Deposition Modeling, and Precision Systems in Modern Applications
Abstract: The interaction between material design, mechanical properties, and advanced motion control systems is vital in a range of engineering domains, including robotics, electronics, and manufacturing. This article examines two key areas: the mechanical properties and design of cutting-edge materials, focusing on composites, polymers, ceramics, and fibers, and the integration of advanced motion control systems in hand-held electronic and photographic devices. The first section delves into the mechanical behavior of various …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 2, Issue 2, 2024 · pp. 26–30 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Advancements In Hydrogenated Diamond-Like Carbon Thin Film Deposition & Surface Modification
Abstract: Materials synthesis and processing are pivotal in advancing technologies across domains such as electronics and biomedical applications. This review provides a detailed exploration of recent advancements in thin film deposition techniques, focusing on hydrogenated diamond-like carbon (HDLC) films and various surface modification methodologies. Beginning with an overview of HDLC films, the paper highlights their unique properties and wide-ranging applications, emphasizing their importance in modern materials science. Key sections of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 761–777 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Experimental Analysis of Residual Stress, Micro-Hardness and Corrosion Behavior of HVOF Sprayed Composite Coating
Abstract: The utilisation of non-traditional composite coating materials, enhanced lubrication, and surface geometry optimisation have all contributed to the tribological performance. Piston rings are among the most crucial engine parts since friction causes between 40 and 45 percent of all energy loss. Fuel efficiency, power loss, and exhaust pollutants are all strongly impacted by the piston assembly's tribological performance. The present study's primary goal was to develop composite coating by using …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 77–82 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Biomedical Coatings: Surface Engineering for Enhanced Biocompatibility and Performance
Abstract: Biomedical coatings have become essential in modern healthcare, significantly improving the performance, durability, and biocompatibility of medical implants and devices. These coatings serve multiple functions, including reducing infection risks, enhancing osseointegration, promoting tissue integration, and enabling localized drug delivery. Advances in surface engineering have led to the development of innovative coatings with superior properties such as antimicrobial resistance, bioactivity, and controlled biodegradation. Various materials are employed in biomedical coatings, including …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 8–15 Read article
-
Investigation of Robotic Transverse Twin-Wire GMAW for Large-Scale Wire-Arc Additive Manufacturing Applications
Abstract: Bulk metal additive manufacturing using wire-arc processes has gained significant attention for fabricating large-scale engineering components due to their high deposition rate and material efficiency. In this study, the feasibility and performance of robotic transverse twin-wire gas metal arc welding (GMAW) for bulk wire-arc additive manufacturing (WAAM) is systematically assessed. The research focuses on understanding arc stability, weld bead characteristics, and process–product relationships under high-deposition conditions. Welding current signals from …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 4, Issue 1, 2026 · pp. 36–50 Read article
-
Advancing Light Emission: A Comprehensive Review of Recent Electroluminescence Material Developments
Abstract: This paper explores the remarkable strides made in the field of electroluminescence and their profound impact on luminescence research. The emission of light because of excitation is known as luminescence. Electroluminescence, a specific form of luminescence triggered by an electric field, has emerged as a promising area of investigation. The underlying principles of luminescence and the intricate mechanisms driving electroluminescence have been examined. Furthermore, recent breakthroughs in electroluminescent materials, device …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 2, 2024 · pp. 08–16 Read article
-
Polymer-Nanowire Hybrid Composites Based on PEDOT: PSS and AgNWs for High-Performance Conductive Films in Flexible Devices
Abstract: The growing demand for flexible photovoltaic and wearable optoelectronic devices has intensified research into polymer-based conductive composites that provide transparency, flexibility, and electrical efficiency. In this work, we report the fabrication and characterization of a hybrid polymer nanocomposite electrode comprising silver nanowires (AgNWs) embedded within a PEDOT:PSS matrix, deposited on flexible polyethylene terephthalate (PET) substrates. The PEDOT:PSS polymer phase, modified with 5 vol% dimethyl sulfoxide (DMSO) and 0.1 vol% Zonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 236–250 Read article
-
Steam Activated Carbon Material from the Fruit Shells of Sterculia foetida for Energy and Environmental Applications
Abstract: Steam activation of the biochar from Sterculia foetida forms a green route for the synthesis of activated carbon material with high specific surface area (1017 m2/g). The corresponding value with a chemical activating agent (K2CO3) is much lower (596 m2/g). Structural parameters of the activated carbon materials were deduced from XRD studies. Moreover the thermal stability of the activated carbon materials from steam activation is nearly 100°C higher than that …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 23–33 Read article
-
A Comprehensive Review on Deposition Techniques for Functional Thin Films
Abstract: Thin films have become a critical element in the design and development of advanced functional materials because of their remarkable versatility, high efficiency, and ability to be easily integrated into a wide variety of devices. These films are used in a broad range of industries, from electronics to energy, owing to their ability to improve the performance of components by providing tailored electrical, optical, and mechanical properties. The deposition of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 1–7 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article