Search
164 articles for “Alkali”
-
Engineering Properties of Alkali Activated Materials Produced from Thu Duc Water Plant Waste Sludge, Fly Ash, and Alkaline Activator by Semi-dry Pressing Method
Abstract: Alkali activated material is a product manufactured to serve the needs of construction. Theproduction of alkali activated material has many advantages compared to other traditional bakedmaterials. The product is not heated at high temperature, so it saves energy and reduces the amountof waste impacting negatively to ecology system and human life. The raw materials for production ofalkali activated materials are re-used from other industrial solid wastes such as fly ash, …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 39–48 Read article
-
Utilization of Clay as Source Material in Geopolymer and Alkali Activated Concretes: A State of Art Review
Abstract: This innovative research looks at the use of clay as source material for geopolymer and alkali- activated concrete, with a focus on how they could promote green construction practices and perhaps replace Portland cement. Alkali-activated concretes and geopolymers offer low-carbon, eco-friendly alternatives by utilizing natural minerals and industrial wastes. Particularly clay is a plentiful and adaptable option for these cutting-edge products. This review looks at different kinds of clay, like …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 635–654 Read article
-
Evaluation of the Emission and Engine Operability of Biodiesel and Biodiesel Blends Produced from Alkali-Catalyzed Esterification and Transesterification of Jatropha Oil Feedstock
Abstract: This study reports on the engine performance analysis of biodiesel and blends produced from jatropha-based bio-oil feedstock via combined esterification and transesterification process, the physiochemical of the bio-oil, and subsequent biodiesel produced. Jatropha bio-oil was characterized to determine its fuel properties. A liquid phase transesterification reaction at 60 min reaction time, 50°C temperature, using a methanol-oil molar ratio of 40:1 and 0.35 g of sodium hydroxide (NaOH) catalyst was carried …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 9–21 Read article
-
Status of Alkaline Flooding Technology
Abstract: Very few review papers on alkaline flooding have been published in the petroleum literature. One paper gives an extensive review of caustic mechanisms to improve oil recovery, followed by a brief description of a few trials. The other paper summarizes the field tests completed, in progress and planned by 1983. This paper will not repeat a detailed discussion of mechanisms and a presentation of individual field projects. Only a brief …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 44–50 Read article
-
Hydrogen from Alkaline Water Electrolysis: A Case Study on Process Economics of Decentralized Production in the Present Indian Scenario
Abstract: Distributed or decentralized hydrogen production by alkaline water electrolysis and use of renewable energy resources to obtain at least a part of the electricity necessary for it can be a truly sustainable scheme that will enable several categories of hydrogen users to reduce their carbon footprint significantly in the near future. The process economics of producing hydrogen through electrolysis, with focus on the production cost per unit of hydrogen in …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 3, 2017 · pp. 1–17 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Impact and Outcomes of Alkaline Water Therapy (Supportive Therapy) in Management of Diabetes, Hypertension and Thyroid Disorders: An Evidence-based Research Study.
Abstract: The present study is a retrospective observational cohort study involving the usage of alkaline water as supportive therapy in the management of metabolic disorders. Patients were randomly selected on daily basis reviewed and followed up. Sixteen patients in the yelahanka Bangalore region who tested positive for diabetes mellitus, hypertension and thyroid disorders and were willing to participate were included in the study. Patients who weren't willing to participate or who …
Published in Research and Reviews: A Journal of Pharmacology · Vol. 14, Issue 1, 2024 · pp. 32–37 Read article
-
Assessment of a Wind Energy Conversion System for Sustainable Hydrogen Production by Alkaline Water Electrolysis in India: Effect of Geographical Location and Wind Turbine Type
Abstract: The use of wind energy for electricity generation and use of this electricity for hydrogen production by alkaline water electrolysis promises to be a truly sustainable scheme for the postulated hydrogen economy. This work addresses the feasibility assessment of a standalone wind energy based turbine generator system that meets the energy requirements of the electrolysis process at several locations in India. Energy requirement for electrolysis depends on the hydrogen production …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 5–22 Read article
-
Characteristics of Novel Geopolymer Composites Synthesized from Red Mud and Diatomaceous Earth in Autoclave Conditions without Using Alkaline Activators
Abstract: The geopolymer-based materials have been studied and developed since the last decades of the 20th century and applied in many fields of life. The production of geopolymer also has many different levels of technology from low to high technology which depends on quality and the applied fields of products. The geopolymer composites are also considered as friendly environmentally products related to low energy consumption production technology; reuse industrial wastes as …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 81–91 Read article
-
Studies on Effect of Various Curing Methods in Glass Fibre Reinforced Geopolymer Concrete with 12 Molarity Alkaline Solutions
Abstract: Due to the increasing environmental impacts associated with ordinary Portland cement, need to develop alternative binders to make concrete, is steadily increasing. Geopolymer concrete is the result of the reaction of materials containing Alumino-silicate with concentrated alkaline solution to produce an inorganic polymer binder. Alkaline solutions used were Sodium Hydroxide and Sodium Silicate. This paper presents results of an experimental study on the compressive strength, flexural strength and split tensile …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 1–7 Read article
-
Thermodynamic, Kinetic and Mechanistic Investigations of Ruthenium(III) Catalyzed Methylparaben Oxidation by Diperiodatocuprate(III) in Aqueous Alkaline Medium
Abstract: The kinetics of ruthenium(III) catalyzed degradative oxidation of methylparaben by the copper complex, diperiodatocuprate(III) in alkaline medium is studied at 25ºC and at a ionic strength of 8.0 × 10−2 mol dm−3. In the presence of catalyst ruthenium(III), the reaction between methylparaben and diperiodatocuprate(III) in aqueous alkaline medium exhibits 1:1 stoichiometry. The oxidation products were identified by UV-visible, GC-MS and IR spectroscopy. The reaction exhibited unit order in case of …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 4–17 Read article
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
A Study of Nacl Alkali Treated Muntingia calabura fibre Reinforced Composites
Abstract: Natural fibre reinforced composites are more commonly used in various applications due to their biodegradability, low cost, available in nature and less harmful to the environment than synthetic fibres. In the present study, NaCl alkali treated MuntingiaCalaburafibres(MCF) reinforced composites are developed using hand layup technique and evaluated the mechanical properties of the composites. The increase of the NaCl content (up to 20 percent) and the fibre weight is maintained constant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 500–507 Read article
-
Experimental Investigation on Strength and Durability Properties of Slag Based Alkali Activated Concrete Incorporating Fly Ash
Abstract: To minimize carbon emissions during cement production and to resolve landfill issues arising from industrial waste, the adoption of alkali-activated concrete (AAC) incorporating various by-products from industry has become increasingly popular as environmentally friendly option to conventional concrete in the construction sector. This study focused on strength and durability of AAC by utilizing waste industrial by-products such as ground granulated blast furnace slag (GGBS) and fly ash (FA) at ambient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 393–400 Read article
-
Mix Proportioning of Biochar as a Partial Replacement of Cement Using Alkaline Activators in Concrete Composite
Abstract: The growth of the world population has led to a heightened need for housing, making construction a crucial sector. Cement, a critical element in concrete mixtures, is indispensable in construction activities. Yet, the diminishing reserves of natural resources such as limestone and rocks, essential for cement manufacturing, necessitate sustainable options. This research investigates the creation of sustainable concrete blends by incorporating biochar and ground granulated blast furnace slag (GGBS), activated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 628–639 Read article
-
Influence of Alkali Treatment on the Tensile Properties of The Hybrid Fiber Reinforced Polymer Matrix Composite
Abstract: In this study, the effect of alkali treatment on the tensile strength of the hibiscus fiber, gongura fiber, and treated madar fiber-reinforced Polymer Matrix Composite (PMC) is studied. The Sodium Hydroxide (NaOH) solution is utilized for madar fiber treatment. The traditional hand layup methodology was used for fabrication. The influence of tensile property control variables such as duration of fiber treatment, concentration of NaOH for treatment, and proportion of fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 28–34 Read article
-
Structural Modification of Sugarcane Bagasse using Alkaline, Acid, and Bleaching Pretreatments for Enhanced Yield of Poly (1→4)-β-D-glucopyranose (Cellulose) and Hemicellulose for Utilization as Biocomposites
Abstract: Sugarcane bagasse, a lignocellulosic byproduct generated in substantial quantities by the sugar industry, represents a promising feedstock for the sustainable production of enzymes and bio-based chemicals. Its high (1→4)-β-D-glucopyranose (cellulose) content, abundant availability, and low cost make it an ideal candidate for bioconversion processes. However, the inherent recalcitrance of bagasse, primarily due to its lignin-rich matrix, necessitates effective pretreatment strategies to enhance enzymatic digestibility. This study presents a comparative investigation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 983–992 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Investigation on Mechanical Properties of Bamboo-Plastic Composites by Alkali Treatment and Illustration via Scanning Electron Microscopy
Abstract: The morphological properties, tensile and flexural strength of composite materials made of bamboo fibres and plastic were investigated. Bamboo-plastic composites (BPCs) were made from bamboo fibres, plastic, and urea formaldehyde (UF) resin to evaluate the effects on mechanical properties. Two different types of plastics, namely polypropylene (PP) and low-density polyethylene (LDPE) were used to make the composite fabrication. The bamboo fibres were extracted after soaking them in a sodium hydroxide …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 86–95 Read article
-
Hot Corrosion Behaviour of Sol-Gel Alumina Coated IN625 Alloy in Alkali Metal Chlorides and Sulphates Salt Deposit Systems
Abstract: Sol-gel derived alumina coating was applied on Inconel 625 alloy using dip coating technique and their hot corrosion studies were carried out in LiCl-NaCl and Na2SO4-K2SO4 salt deposits system at 650 °C and 850 °C respectively. Oxidation kinetics measurement indicated the occurrence of an order of magnitude lower oxidation rate and around 15–20 % higher activation energy for the coated substrate as compared to uncoated one. EDS analysis of the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 1, 2016 · pp. 9–16 Read article