Search
1973 articles for “6-(4-chlorophenyl)-1” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
The thermodynamic studies of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile in 60% DMSO in the temperature range 298 to 313 K
Abstract: Densities and viscosities of 6-(4-chlorophenyl)-1, 2, 3, 4-tetrahydro-2,4-dioxopyrimidine-5-carbonitrile have been measured at different concentration in 60% dimethyl sulphoxide (DMSO) in the temperature range 298 to 313 K. The John-Dole equation was used to determine the viscosity. Gibb’s free energy (∆G), entropy change (∆S) and enthalpy change (∆H) were evaluated from relative viscosity . The negative sign of ∆G and ∆H and positive sign of ∆S indicates the spontaneity of reaction …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 78–81 Read article
-
Corrosion Inhibition Effect of 1-(4-Methoxy-phenyl)-3-(5-phenyl-1,3,4-oxadiazol-2-yl) propan-1-one Inhibitor for Mild Steel in 1 M HCl Solution
Abstract: The environmental friendly 1-(4-Methoxy-phenyl)-3-(5-phenyl-1,3,4-oxadiazol-2-yl) propan-1-one (A1) inhibitor is synthesized and their corrosion inhibition for Mild Steel in a 1 M HCl solution was studied using weight loss methods, electrochemical measurements, and the surface morphology of mild steel with and without inhibitor were studied using scanning electron microscopy (SEM) analysis. As the concentration of the inhibitor was increased the inhibition efficacy of 1-(4-Methoxy-phenyl)-3-(5-phenyl-1, 3, 4-oxadiazol-2-yl) propan-1-one was also enhanced and on …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 2, 2021 · pp. 31–37 Read article
-
1D-Nano-Scale Porous Silicon (1D-Psi) as Optical Sensor Device
Abstract: This research article embarks on a thorough experimental inquiry into the detection of kerosene adulteration in petrol, employing a sophisticated one-dimensional microcavity of nano-scale porous silicon (1D-PSMC) sensing device. The significance of this investigation stems from the detrimental consequences of petrol adulteration, which not only aggravates environmental pollution but also jeopardizes the functionality and durability of machinery components, thereby posing significant economic and environmental challenges. The 1D-PSMC, designed to function …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 69–75 Read article
-
Delay Analysis of HS-14T 45nm CMOS SRAM with Different SRAM Techniques for Improvement in Speed
Abstract: This paper presents a novel HS-14T design aimed at significantly improving read and write delays compared to conventional 6T and other memory cells RHRD-12T, SEUH-12T, and NHRC-14T. As technology scales, the demand for faster and more stable memory cells becomes increasingly critical. Our proposed HS-14T incorporates additional transistors to enhance stability and reduce access times, resulting in notable performance gains. Comprehensive simulations reveal that the HS-14T SRAM cell substantially reduces …
Published in Journal of VLSI Design Tools and Technology · Vol. 14, Issue 2, 2024 · pp. 1–13 Read article
-
Magnetic Moments of Mirror Hypernuclei with X-N-Λ Configuration for 6 Λ He ∼ 6 Λ Li and 14 Λ C ∼ 14 Λ N with Hybrid Quark Model
Abstract: A microscopic method to evaluate the effective magnetic moment of hyperon inside a six-quark bag based on quark exchange current model has been described. The Schmidt formula and its modification for magnetic moments of hypernuclei with X-N-Λ in the framework of hybrid quark model has also been discussed. The modified values depend on (i) the probability of the overlap of hyperon with the nucleons and (ii) the effective magnetic moments …
Published in Journal of Nuclear Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 15–23 Read article
-
Optimization of Process Parameters of an Induction Furnace for Aluminium 6061 using Robust Design Approach
Abstract: Electric induction furnaces are extensively used in the foundry industries for the preparation of alloys and metal castings. The induction furnace works on the principal of electromagnetic induction. Some of the applications of induction heating include heat treatment, melting, surface treatment and in food industry. The detailed study about the working of an induction furnace was done. The induction furnace procured by mechanical department of our college is made by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 1, 2017 · pp. 6–12 Read article
-
Overlapped Multipass Laser Transformation Hardening of Ti-6Al-4V Titanium Alloy Using Continuous Wave Rectangular Beam
Abstract: Overlapped multitrack laser transformation hardening (OMLTH) of Ti-6Al-4V titanium alloy of Grade 5 of 2 mm thickness sheet has been carried out using 2 kW Nd:YAG laser source with a CW rectangular beam of size 1×14 mm2. The present research article intended to provide a profound understanding of the multipass laser hardening process of TI-6Al-4V titanium alloy, and to investigate the effect of rectangular laser beam process parameters i.e., the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 35–42 Read article
-
A Comparative Study on Nutritional Assessment and the Health of Toddlers (1–3 year) in Urban and Rural community of Ludhiana, Punjab, India.
Abstract: Toddlerhood is difficult exiting interesting period of life. Developmental milestones are a set of functional skills or age-specific tasks that most children can do at a certain age range. The study sample was 500 toddlers aged 1–3 year was selected, 250 from urban and 250 from almost equal number of male and female toddlers. A modified conceptual frame work of the study was based on the Callista Roy Adaptation Model. …
Published in Journal of Nursing Science & Practice · Vol. 8, Issue 2, 2018 · pp. 6–15 Read article
-
Health Status of Adolescents in Rural Area of Anand
Abstract: Aim: The study was carried out with the aim to access the health status of adolescents in a rural area of Anand. So far no studies were done over the rural areas of Anand District. Method: Cross-sectional study was conducted on 417 students of 13 – 15 years (283 males and 134 females). The data were collected using a semi-structured questionnaire for socio-demographic, anthropometry (Height, Weight, BMI), physical activity level. …
Published in Research and Reviews: A Journal of Health Professions · Vol. 8, Issue 3, 2018 · pp. 91s–96s Read article
-
Synthesis, Characterization and Antibacterial Activity of Mono- and Binuclear Co(II) and Cr(III) Mixed-Ligand Complexes Derived from α-Amino Acid and 1,10- Phenanthroline with 1,3-Diaminopropan as a Spacer
Abstract: Mixed-ligand complexes of Co(II) and Cr(III) ions were synthesized from the reaction of metals chloride salts with α-amino acid (H2L1) as a primary ligand and 1,10-phenanthroline (L2) as secondary ligand. The ligand 2-(benzo[d]thiazol-2-ylamino)-2-(2-hydroxynaphthalen-1-yl) acetic acid (H2L1) has been synthesized from the condensation reaction of inobenzothiazol with 2-hydroxy-1-naphthaldehyde in the presence of HCN as three components–one pot reaction. H2L1 considered as a tridentate chelater of ONO-coordination binding type toward the metals, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 107–120 Read article
-
Building a Resilient Climate Regulatory Ecosystem for Nigeria
Abstract: Terrestrial ecosystems, which store more carbon than the atmosphere, are vital to influencing carbon dioxide-driven climate change. Climate and land-use change are critical and interlinked components of the Carbon budget in human-dominated landscape, using the InVEST model maps of land use and stocks in four Carbon pools (aboveground biomass, belowground biomass, soil, dead organic matter) are used to estimate the amount of Carbon currently stored in the landscape and the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 2, 2020 · pp. 46–62 Read article
-
Effect of Particle Size Mix Ratio of Clay and Agro-Based Material for AGO and PMS Treatment on Microbial Growth
Abstract: The characteristics of possible microbes isolated and identified on adsorption process involving AGO and PMS as contaminants in fresh water medium was monitored using agro – based materials. The formulated adsorbent is made of clay with ago-based materials of Banana Ogoni Red (BOR) Banana Native (BN), Plantain Agbagba 1 (PA1), and Plantain Ogoni Red (POR). The particle size mixed ratio of clay to the various agro-based materials were 150𝜇𝑚 R5:5, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 2, 2024 · pp. 05–14 Read article
-
A Study on Role of Pharmacist in Providing Advanced Patient Counseling in Medication Usage in General Medicine Department of an ESI Hospital
Abstract: Aim: The present study aims at the implementation of pharmacist services in providing advanced patient counselling in medication usage in the general medicine department of an ESI hospital. Objectives: The key objectives of the study include Improving Patient safety initiatives, improving Patient health related outcomes, reducing work burden of Physicians and nurses, providing knowledge on medication usage. Methodology: (1) Study Design: It is a Prospective and observational study. (2) Study …
Published in Research and Reviews: A Journal of Medicine · Vol. 9, Issue 1, 2019 · pp. 1–8 Read article
-
Establishment of IHTC value of LM 13 and ADC 12 material for sand casting by FEM
Abstract: Abstract: For making a simple to very complex shaped product, sand casting is an inexpensive, useful and significant process. Throughout the process, Solidification plays an important role for making a sound and defect-less casting which was affected by different parameters like Interfacial Heat Transfer Coefficient, Casting Material & Shape, Mold Material, etc. For quality casting, industries trying to optimize solidification process by various methods. Present study shows the range of …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–6 Read article
-
Implementation of a 4-Bit Synchronous Counter in SkyWater 130 nm CMOS Technology Using Open-Source EDA Tools
Abstract: As semiconductor technology continues to scale down, the physical layout of integrated circuits has become increasingly critical in determining performance, power consumption, and area efficiency. This paper presents the complete physical design implementation of a 4-bit counter, from Register Transfer Level (RTL) to GDSII, using the SkyWater 130 nm open-source Process Design Kit (PDK) and the OpenLane automated physical design flow. Functional verification of the RTL design was initially performed …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 2, 2026 Read article
-
Association of Metabolic Syndrome with Cholelithiasis in Female Patients and Its Impact on Clinical Management and Surgical Outcome
Abstract: Background: Metabolic syndrome (MetS) is associated with obesity, insulin resistance, dyslipidemia, and hypertension, which may predispose to gallstone formation. This study aimed to evaluate the association between MetS and cholelithiasis in female patients and to assess its impact on clinical presentation, surgical difficulty, and postoperative outcomes. Methods: A prospective observational study was conducted on 88 female patients with ultrasonography-confirmed cholelithiasis. Patients were divided into two groups: MetS (n=44) and non-MetS …
Published in Research and Reviews : Journal of Surgery · Vol. 14, Issue 3, 2025 · pp. 1–7 Read article
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Assessing the Growth and Development of Children with Celiac Disease (1–12 years): A Descriptive Study
Abstract: Introduction: Celiac disease is a chronic autoimmune disease. It affects genetically susceptible individual by making the small intestine permanently sensitive to gluten. Gluten is found in wheat, rye and barley. Celiac disease is caused by intake of gluten. Patient with celiac disease experiences diarrhea, steatorrhea, weight loss and failure to thrive due to malabsorption. Objective: To assess the growth and development of children with celiac disease (1–12 years) attending the …
Published in Research and Reviews : A Journal of Immunology · Vol. 9, Issue 3, 2019 · pp. 12–19 Read article
-
Computational Identification of Protein Tyrosine Phospatase-1B (PTP-1B) Inhibitors for Checking Type II Diabetes
Abstract: Protein tyrosine phosphatases (PTPs) are a family of enzyme that comprises of about 100 proteins which catalyze dephosphorylation of phosphotyrosine residues in protein substrates. Phosphotyrosine is a central element in cell signaling, and its activity is essential for cellular homeostasis and for appropriate responses to extracellular signals. PTP-1B antagonizes insulin signaling by reducing the activation state of the insulin receptor kinase, thereby inhibiting post-receptor signaling in insulin responsive tissue. The …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 6, Issue 3, 2017 · pp. 21–25 Read article
-
Millets as a Sustainable Crop for Nutritional Security: Addressing Malnutrition Challenges
Abstract: Millets are cereal crops belonging to the Poaceae family, which is the scientific name for the grass family. They are classified into two main groups: major millets which include Sorghum, Pearl, Finger millet, and minor millets, such as Little, Foxtail, Proso, Barnyard, and Kodo millet. India is the chief producer of millets, with an annual production of more than 17 million tonnes. This accounts for 80% of Asia’s millet production …
Published in International Journal of Nutritions · Vol. 2, Issue 1, 2025 · pp. 33–46 Read article