Search
162 articles for “Surface coatings”
-
Research Paper on Thermal Comfort Analysis of Tractor Considering Multi-Parameters
Abstract: The main functions of a vehicle cabin are to provide a comfortable and relaxing environment for its operator and to protect them from vibrations, noise, and other adverse influences. Modern agricultural tractor cabins are complicated, high-efficiency systems, and the goal of their development is to reduce their negative influence on the environment. Main factors for thermal comfort are the dry-bulb temperature, relative humidity, surrounding surface temperature, and air motion. A …
Published in Journal of Mechatronics and Automation Read article
-
Inhibitors of steel corrosion in pipelines
Abstract: Traditions of similarity in test methods have evaluated different efficiencies of different inhibitors. Electrostatically adsorbed green organic inhibitors act as mixed type double layer interactions to steel surfaces. Hydro distillation of plant originated oils is good inhibitors to corrosion of steel, achieved from medicinal grounds. Drinking water corrosion responds maximum numbers of ionic variables to deal with additive mechanical variables for studies in corrosion of steel. Intentional injections of HCl …
Published in Journal of Petroleum Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 17–26 Read article
-
Optimization of Performance Characteristics of Rail Wheel Profiling using Taguchi with ANOVA
Abstract: Optimization is the process or technique to approach the best output goal, which is necessary, that the production of the industries at the best quality in minimum total input cost and maximize the profit. So there are many optimization methods, one of them is Taguchi method. The outline of the paper, the optimization approach based on Taguchi method, which is to optimize the cutting parameter in under grounded CNC Turning …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 25–38 Read article
-
A Ventilated Dual-Function Photonic–Phononic Metasurface for Simultaneous Passive Radiative Cooling and Low-Frequency Noise Mitigation in Building Envelopes: Conceptual Design and Computational Feasibility Analysis
Abstract: Acoustic metamaterials for sound insulation and photonic/radiative-cooling metamaterials for passive thermal management have each matured separately for building-envelope retrofit, but existing studies address ventilation, acoustic damping and radiative thermal control in isolation, and no reported unit-cell architecture co-designs all three within a single shared structure. This gap persists because materials that are acoustic absorptive are generally dense and structurally opaque, whereas materials that are highly solar-reflective are conventionally applied to …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
Total-internal-reflection-based optical rotation quasi-phase-matching for efficient second-harmonic generation in Cadmium Germanium Arsenide crystal
Abstract: This study investigates a total-internal-reflection (TIR)-based optical rotation quasi-phase-matching (ORQPM) approach for second harmonic generation within a cadmium germanium arsenide crystal slab. The crystal is coated with a thin film of yttrium oxide to facilitate precise control over phase shifts between p- and s-polarized light upon reflection at the slab-film interface. By leveraging the interplay between TIR- induced optical rotation and fractional QPM effects at designated bounce points, the configuration …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 1, 2026 · pp. 01–09 Read article
-
Optimizing Machinability in Wire EDM of AISI P20 Steel Employing Composite Material Wires with Hybrid Neural Network Approach
Abstract: AISI P20+Ni steel is extensively used for forging dies, plastic moulds, and automotive die components due to its excellent polishability, hardness, and homogeneity. This research utilizes Wire Electrical Discharge Machining (WEDM) to process pre-hardened AISI P20+Ni steel, focusing on minimizing both recast layer thickness (RLT) and kerf width (KW). The performance of wires made from composite materials, including zinc-coated brass wire (ZBW), cryogenically treated ZBW (CZBW), and ultrasonic vibration-assisted brass …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1120–1133 Read article
-
Wettability and Physiothermal Analysis of Silver-Reinforced Eggshell-Derived Hydroxyapatite Based Biocomposite
Abstract: Hydroxyapatite (HAp), a biocompatible ceramic material, has garnered significant interest in medical applications due to its natural bone type replica. The current study investigates the physical, wettability, and thermal properties of a novel HAp derived from eggshell waste and reinforced with silver nanoparticles at 0.0, 0.1, 0.2 and 0.5 weight % concentration using chemical precipitation method and termed as HAP0.0Ag, HAP0.1Ag, HAP0.2Ag and HAP0.5Ag respectively. As observed, the Fourier transform …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 300–314 Read article
-
Characterization Techniques for Thin Film Coatings Based on SiO₂, TiO₂, and ZrO₂
Abstract: Thin film coatings made from silicon dioxide (SiO₂), titanium dioxide (TiO₂) and zirconium dioxide (ZrO₂) have attracted great interest owing to their excellent optical, electrical, mechanical and chemical properties. These oxide thin films are widely used in microelectronics, solar cells, sensors, biomedical devices, photocatalysis, anti-reflective coatings and protective layers. The structural, morphological, compositional, optical and mechanical properties of these coatings are closely related to their performance and reliability. Therefore, thorough …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 Read article
-
Comprehensive Strategies for Enhancing Corrosion Protection of Concrete Structures
Abstract: The global issue of reinforcing steel corrosion in concrete structures presents a significant challenge, resulting in surface cracking, discoloration, spalling, and ultimately compromising structural integrity. The considerable expenses associated with addressing extensively deteriorated sections, coupled with the uncertainty of completely resolving the underlying corrosion issue due to potential intrinsic structural vulnerabilities, presents further multifarious problem. This article offers a comprehensive and systematic exploration of the corrosion triggers in concrete structures. …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 36–44 Read article
-
5000 Series of Aluminum and Its Alloys Opaque by Inhibitors
Abstract: 5XXX series of alloys are prepared for marine applications. Light weight, strength, low maintenance and inherent tendency to form passivity surfacing have selected these alloys for manufacture of cargo ships. Anti corrosive paints have been traditional protections in these alloys. Workers exposed to chromate residues during sanding of aircraft and recoating have increased risk of cancer to 250,000-fold higher. These paints are hazardous for aquatic life, so eco-friendly corrosion inhibitors …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 1–8 Read article
-
Study of Electrically Conductive Polymer for Antistatic and Sensor Application
Abstract: Electrically conductive polymers (ECPs) are a unique category of smart materials that integrate the mechanical flexibility and ease of processing characteristic of conventional polymers with the electrical conductivity typically associated with metals or semiconductors. In recent years, they have attracted considerable interest due to their promising potential in advanced technological applications, especially in antistatic coatings and electronic sensing devices. The unique ability of these polymers to conduct electricity arises from …
Published in International Journal of Minerals · Vol. 3, Issue 1, 2026 · pp. 46–51 Read article
-
A Review Paper on Minimisation of Sand Casting Defects through Quality Improvement Methods
Abstract: Casting is a process of producing near net–shape metal components. It requires detailed planning, execution and quality inspection to ensure not only the dimensional accuracy of casting parts but the metallurgical integrity and mechanical properties of castings. This paper reviews the different types of casting defects such as shrinkage porosity, cold shut, sand inclusions, mould failure, surface hardening occurring in foundries. These defects directly affect on profitability and quality level …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 10–17 Read article
-
An AI-Driven IoT Framework for Autonomous Quality Assurance in Optical Lens Manufacturing
Abstract: The evolution of high-precision optics—ranging from smartphone micro-lenses to high-end astronomical glass—demands unprecedented accuracy in manufacturing. Traditional inspection methods, reliant on manual sampling or static automated optical inspection (AOI), often fail to bridge the gap between high-speed production and the detection of microscopic surface aberrations. This paper introduces an integrated architecture combining the Internet of Things (IoT) and Deep Learning-based decision-making systems to revolutionize lens quality control. By deploying an …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 36–41 Read article
-
Effect of Varying Particle Size and Content of Barley Husk on the Physical, Mechanical and Diffusional Properties of Poly Vinyl Alcohol/Barley Husk Composite Films
Abstract: Poly vinyl alcohol (PVA)/natural barley husk (NBH) composite films were prepared using solution casting method. The influence of content (5, 10, 15, 20 and 25 wt%) and particle size (89, 152, 251, 354 and 599 µm) of NBH on the physical, mechanical and diffusional properties of composite films were evaluated. Tensile strength and elongation of the composite films decreased by 55.73 and 59.48% and young’s modulus increased by 76.46% with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 27–35 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 236–253 Read article
-
Electrochemical Evaluation of Corrosion Behavior in Industrial Alloys Under Acidic and Marine Conditions
Abstract: Corrosion represents a spontaneous physicochemical transformation in which metals revert to their more stable thermodynamic state, typically oxides, hydroxides, or sulfides, as a result of interaction with environmental elements. Rather than being a simple surface reaction, corrosion is a complex electrochemical phenomenon that significantly influences the durability, reliability, and performance of metallic structures across industrial, marine, and domestic sectors. The consequences extend beyond material degradation, contributing to substantial economic losses, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 24–36 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
A Review of Failure Investigations and Its Techniques
Abstract: Valve failure poses a significant financial risk in the offshore oil and gas industry. Serious repercussions from this problem could include property damage and lost output from operational shutdowns. Additionally, it can lead to serious health, safety, and environmental (HSE) concerns such as oil and gas leaks, environmental contamination, and potential fatalities. In the Norwegian offshore industry, different kinds of valve failures have happened for a number of reasons, including …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 33–41 Read article
-
Enhanced Room-Temperature Gas Sensing Performance of 2% Mn-Doped Sri Lankan Natural Graphite Thin-Film Sensors for Ammonia, Acetone, and Ethanol vapors Detection
Abstract: The development of room-temperature gas sensors with high sensitivity, fast response, and low-cost remains a critical challenge for environmental monitoring and safety applications. In this work, we report the fabrication and characterization of a 2% Mn-doped Sri Lankan natural graphite thin-film sensor for the detection of ammonia (NH3), ethanol (C2H5OH), and acetone (C3H6O) vapors under ambient conditions. The sensor was prepared using the doctor-blade coating method on Indium Tin Oxide …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 39–49 Read article
-
Synthesis, Characterization and Antibacterial Evaluation of Novel Canola Oil-Based Poly-(Citrate/Succinate)-amide Incorporated with Zn (II) and Ni (II) Metal Ions
Abstract: This present research study is to fabricate efficient metal-incorporated Canola oil (CO) polymers synthesised using dicarboxylic acids – Citric acid (CA) and Succinic acid (SA). The research mainly highlights the fabrication of polymeric materials using CO via a safer chemical synthesis route with less toxic reactants and minimal solvent/diluent to accomplish sustainability, adopting the green chemistry principle. Divalent Zinc (Zn) and Nickel (Ni) were incorporated in the poly-(Citrate/Succinate)-amide matrix, Ni …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 45–69 Read article