Search
278 articles for “Working Fluids”
-
Electrochemical Biosensors for Disease Diagnostics
Abstract: Electrochemical biosensors have emerged as one of the most promising tools for disease diagnosis because they combine high sensitivity, rapid response, portability, and low cost in a single analytical platform. In recent years, growing interest in early disease detection has pushed researchers to develop biosensors that can detect clinically important biomarkers in blood, saliva, urine, sweat, and other biological fluids. These sensors work through the interaction between a biological recognition …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 · pp. 43–54 Read article
-
INVESTIGATION OF THERMAL CONDUCTIVITY OF SILVER NANOPARTICLES IN BASEFULID OF WATER ETHYLENE GLYCOL
Abstract: Nanotechnology is interface technologies that span many different science and applications area.When engineering, science and technology are conducted at the nanoscale is called asnanotechnology. It is about 1 to 100 nm (nano-meter) where nano denotes the scale range of onebillionth of meter. Nanotechnology refers the properties of atoms and molecules measuring 0.1 to1000 nm. Nanofluids are nothing but suspension of nanometer sized particles in the base of fluid.The base fluid …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 13–19 Read article
-
CFD Analysis of Savonius VAWT for Household Application
Abstract: Fossil fuels are depleting at very fast rate and will have shortages in near future. Also, prices of fuelsincrease day-by-day, demands of renewable energy sources increases for electrical power generation.Wind energy is available in nature free of cost and in abundant form, so is an excellent option forgeneration of electric power through wind turbine technology. Rapid increase in global energyrequirement resulted in considerable attention towards renewable energy sources as there …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 18–32 Read article
-
Experimental Investigations on the Durability of PMMA Microfluidic Devices Fabricated by Hot Embossing Lithography with Plasma Processing for Bioengineering Applications
Abstract: In this research paper, total 1290 individual static contact angles of different working liquids have been measured and recorded on the flat polymethylmethacrylate (PMMA) surfaces. Total 474 individual PMMA microfluidic devices have been fabricated by the maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory and mechanical engineering workshop to determine the durability of these microfluidic devices. Total nine individual working liquids have been used to …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 1–18 Read article
-
Nano Coolants for Automotive Applications :A Review
Abstract: In recent decades nano coolant has come into play to overcome requirement of better heat transfer because of low thermal conductivity of conventional fluid such as water and ethylene glycol. In the continuation of nano fluids research, presently researchers have also used hybrid nano fluid, which are synthesized by suspending dissimilar nano particles either in mixture or composite form. This article is focused on the experimental and numerical studies carried …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 20, Issue 1, 2018 · pp. 9–22 Read article
-
Short Report on Polymer Based Automated Fluid Machines for Applications in Microfluidics
Abstract: In this experimental work, a couple of gradual expansion microchannels are fabricated by polymethylmethacrylate (PMMA) using the maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol and dyed water are the prepared working liquids. The CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record each surface-driven microfluidic flow of dyed ethylene glycol and dyed water in the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 23–28 Read article
-
Research on Smart Materials for Automotive Applications
Abstract: Smart materials are nowadays being used in all spheres of human life and technology. A lot of research is going on to utilize their potential in various engineering applications which may prove useful for common people. A wide variety of smart materials exist, which includes piezoelectric materials, magneto rheological materials (MR), electro rheological materials (ER), shape memory alloys, etc. In both ER and MR fluids, the change in fluid properties …
Published in Journal of Automobile Engineering and Applications · Vol. 1, Issue 1, 2014 · pp. 6–10 Read article
-
Study of Energy Conversion System Using a Magnetic Fluid: An Overview
Abstract: Magnetic fluids have promising potential for direct energy conversion system. Magnetic fluids are stable suspension of nano-sized ferromagnetic particles in suitable non-magnetic carriers like kerosene, organic liquids, water etc. The typical curie temperature of magnetic particles is controlled by selecting constituents of the ferromagnetic material. There are large numbers of practical applications of magnetic fluids in various fields ranging from engineering to medicine. A thermomagnetic device gives an idea of …
Published in Recent Trends in Fluid Mechanics · Vol. 3, Issue 1, 2016 · pp. 15–22 Read article
-
Short Report on the Microfluidic Flow of Dyed Ethylene Glycol
Abstract: In this experimental work, a single polymethylmethacrylate (PMMA) microfluidic device as gradual expansion microchannel is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol is prepared and used as working liquid in this work. A CMOS camera is used to capture the passive microfluidic flow of dyed ethylene glycol in the fabricated microfluidic device. Nano fluidics is the nano-scale fluid mechanics in nanotechnology. In future, …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 2, 2021 · pp. 10–13 Read article
-
Particle Concentration Effect on Thermal Properties of Nano-fluids
Abstract: AbstractWith the advancement of time and system miniaturisation, requirement of high thermal capacity material is increasing. This problem can be served by nano-fluids as they have high thermal conductivity compared to the conventional materials. Nano-fluids are the suspension of solid nano-particles in the base-fluid. Water (H2O) is considered as the base-fluid in the present work while Al2O3, Cu, TiO2, SiC and B4C are considered as nano-particles. Two-phase mixture rule and …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 18–21 Read article
-
Microfluidic Features in Fluid Mechanics for Bioengineering Applications
Abstract: In this work, a single SU-8 based glass microfluidic device is fabricated by the mask less lithography and indirect bonding technique. The sealing is performed by author during the hard baking in maskless lithography. Dyed water is prepared as working liquid in this work. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used by the author to record the surface-driven capillary …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 11, Issue 3, 2021 · pp. 1–4 Read article
-
Fluent Simulation & Analysis of Earth Heat Exchanger with Air as a Cooling Medium
Abstract: Because of the temperatures differential between the environment and the subsurface, an Earth Air Tube Heat Exchanger (EATHE) uses the thermal energy of the ground for air conditioners in the winter and air cooling in the summer. Everyone can lower the amount of energy needed for space heating or cooling with the aid of EATHE. However, it is challenging to create precise energy simulations and designs for calculating surface heat …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 1, 2024 · pp. 18–26 Read article
-
A Thermal Review and Simulation of An Earth Tube Heat Exchanger
Abstract: AbstractConventional energy is the renewable source of energy. It is the best source of energy and free in nature also in abundance. At the present situation, heating and cooling is a major concern in environment due to global warming. Air conditioning systems has been developed to resolve major part of energy is being engaged in such issues. So, Earth tube heat exchanger is a renewable source of energy for heating …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 1–10 Read article
-
A Thermal Review and Simulation of Renewable Tube Heat Exchanger – A Review
Abstract: AbstractRenewable energy is the conventional source of energy. It is the endless source of energy and quality available in nature. At the present scenario, heating and cooling is a major concern in environment due to global warming. Air conditioning systems has been developed to resolve major part of energy is being engaged in such issues, which also causes global warming. Renewable tube heat exchanger is a renewable source of energy …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 9–17 Read article
-
Short Review on the Flow and Filtration of Polystyrene Microparticles in Micron-Scale Fluid Mechanics towards the Applications related to fluidic Microelectromechanical Systems
Abstract: Maskless lithography, hot embossing lithography and direct bonding technique are useful to fabricate the polymethylmethacrylate (PMMA) microfluidic devices. Also, maskless lithography and indirect bonding technique are useful to fabricate the SU-8 based glass microfluidic devices. In this work, a short review on microfluidic flow and microfluidic filtration of microparticles is provided by author related to the micron-scale fluid mechanics. This review may be useful to perform the blood filtration in …
Published in Journal of Microelectronics and Solid State Devices · Vol. 9, Issue 4, 2022 · pp. 36–41 Read article
-
Flow and Filtration of Polystyrene Microparticles in Micron-Scale Fluid Mechanics towards the Applications related to fluidic Microelectromechanical Systems
Abstract: Maskless lithography, hot embossing lithography and direct bonding technique are useful to fabricate the polymethylmethacrylate (PMMA) microfluidic devices. Also, maskless lithography and indirect bonding technique are useful to fabricate the SU-8 based glass microfluidic devices. In this work, a short review on microfluidic flow and microfluidic filtration of microparticles is provided by author related to the micron-scale fluid mechanics. This review may be useful to perform the blood filtration in …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 3, 2021 · pp. 36–41 Read article
-
The Numerical Calculation of the Behavior of the Gas Bubble, Fixed on the Solid Surface
Abstract: The existing literature data permit only qualitatively to trace the behavior of gas bubble, fixed on the solid surface, with the narrow range of Bond numbers (β). For investigation of the profiles, common surface energy of gas bubbles and equilibrium of forces, which retain bubbles on the solid surface in the fluid, the computer model of numerical calculation of the profile, surface square, volume of the gas bubble, fixed on …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 2, 2019 · pp. 40–46 Read article
-
Synthesis and Experimental Evaluation of Graft Polymer Nanocomposite in Water Based Drilling Fluid System for Reactive Unconventional Reservoirs
Abstract: AbstractThis experimental work discusses the evaluation of polyacrylamide-grafted-gum arabic/carboxymethyl cellulose nanocomposite as a drilling mud additive for the drilling of reactive shale formations which may lead to wellbore instability. The synthesized nanocomposite was synthesized with free polymerization technique and it was characterized by XRD, FTIR, and FESEM. Then, it was preceded in the development of the WBDMS. Its effect on the rheological and filtration control properties of the formulated mud …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 34–41 Read article
-
Underbalanced Drilling and Its Advancements: An Overview
Abstract: Ever increasing global energy demand associated with depletion of conventional hydrocarbon resources drives exploration and production (E&P) industry to invent advanced new technologies in frontier areas of drilling, production and reservoir engineering to enhance hydrocarbon production from unconventional resources or depleted reservoirs. Demand to produce from a low pressure marginal reservoir and the discoveries of naturally fractured reservoirs lead to the development of new drilling techniques like underbalanced drilling along …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 37–51 Read article
-
Modelling and Interpretation of A Novel Battery-Motor amalgamated Thermal Management System using rGO/CO3O4 based Hybrid Nano-composite Coolant for Electric Vehicle Applications
Abstract: Battery and motor have to be given equivalent importance to maintain the lifetime, thermal characteristics, efficiency and safety of Electric Vehicles (EVs). Thermal management of EVs need to be considered for battery and motor because of dynamic loading conditions. This research proposes a novel Battery-Motor Integrated Thermal Management System (BMITMS) for EV applications. An EV assembled with LiFePO4 battery pack and a three-phase induction motor has been considered on this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 225–243 Read article