Search
784 articles for “performance characteristics”
-
Analysis of Machining Parameters in Wire EDM with Aluminum Alloy Using PCA and TOPSIS Approach
Abstract: Although the efficiency of traditional cutting processes is inadequate by the mechanical properties of the processed material and the intricacy of the work piece geometry, electrical discharge machining (EDM) being a thermal erosion process, is subject to no such limitations. This paper summaries the suitable use of Taguchi’s L27 orthogonal array which takes 27 experimental runs to develop a mathematical model for correlating the interactive and higher order impacts of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 1–11 Read article
-
Embedded Real Time Operating Systems Performance Analysis for ARM7 Platform
Abstract: An embedded RTOS is a software part of an embedded system that is used in the almost all the real-time application development process. It has a considerable effect on the reliability, robustness and performance of system under design and test. This paper addresses the concern of parameterized performance characteristics of two different RTOSs i.e. μC/OS-II and FreeRTOS ported on same common controller platform from ARM7TDMI family. Different OS services are …
Published in Current Trends in Signal Processing · Vol. 4, Issue 2, 2014 · pp. 24–29 Read article
-
Efficient and High Power InGaN Based MQW Blue Laser
Abstract: AbstractThis research work deals with the design of a 450 nm MQW blue laser to get the optimized output power and efficiency. The maximum output power is found for an injection current of 120 mA. This laser is designed to improve the performance of a MQW blue laser to get an efficient and high power output. For this purpose the structure is designed using In0.235Ga0.765N/Al0.07Ga0.93. A high performance of the …
Published in Trends in Opto-electro & Optical Communication · Vol. 4, Issue 3, 2014 · pp. 14–22 Read article
-
Assessing the Impact of the Compression Ratio on Emission and Performance Attributes of Jatropha Biodiesel Fuelled VCR Engine.
Abstract: In the view of fast diminishing petroleum reservoirs and polluted environment, it’s the need of time to opt for a viable alternative to diesel fuel. Fuels derived from plant oils or animal fats are better alternatives to diesel fuels. The jatropha derived from the non-edible plant has proven its ability for being an alternative to conventional diesel. The variable compression ratio (VCR) technology is recognised for improving the performance, efficiency, …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 6–17 Read article
-
Design and Simulation of Ternary Gates Using Fin-FET
Abstract: In recent years, digital communication system has becomes more popular. But the on-chip interconnections have become a major problem as more and more modules are packed into a chip by reducing the gate size. As the gate size is reduced further the complexities in the circuit increases. Binary logic circuit dissipates a lot of energy, increase processing time, and causes coupling effect. In the Ternary logic system, there are three …
Published in Journal of Semiconductor Devices and Circuits · Vol. 2, Issue 3, 2015 · pp. 4–18 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Performance Analysis and Optimization of a 1550 nm MQW VCSEL by Varying Differential Gain and Injection Current
Abstract: AbstractIn this work, the performance characteristics of a 1550 nm top emitting multi quantum well (MQW) vertical cavity surface emitting laser (VCSEL) using AlGaInAs/InP are presented. Using this material the peak material gain is obtained as 1652.3 cm-1. A high performance designed VCSEL is obtained with the optimized value of differential gain and injection current. The optical output power of 31.37 dBm and the resonance frequency of 2.5 GHz are …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 3, 2013 · pp. 31–37 Read article
-
Exploring Polymer Substrates for CBSIW Antennas: Paper and Denim for Enhanced Gain and Bandwidth
Abstract: This paper presents a novel approach to antenna design by leveraging the unique properties of paper and Denim materials, both of which are polymers. This research underscores the potential of unconventional polymer materials like paper and jeans in antenna design, offering new avenues for the development of lightweight, flexible, and cost-effective communication devices for diverse wireless applications. The study focuses on the design and analysis of non-conventional substrate-based Circular Backed …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 64–80 Read article
-
Smart Grid – An Indian Perspective
Abstract: In this paper the conception, feature and Technical Composition of smart grid is expounded, and the development process and present research status of smart grid home and abroad as well as the practical significance of developing smart grid in India are introduced. The paper analyzes the characteristics and direction of India’s smart grid development, and point out that the development of smart grid requires the development of many smart grid …
Published in Trends in Electrical Engineering · Vol. 3, Issue 3, 2013 · pp. 62–67 Read article
-
Effect of Layering of Reinforcement on Bearing Capacity of Shallow Footing Resting on Sand
Abstract: The study was done to investigate the performance of reinforced soil foundation. The construction of reinforced soil foundation has a cost effective alternative to conventional methods. Performance characteristics were improved by using one or more layers of non-woven geotextile placed beneath the footing to create a composite material. The reinforcement in the soil interacts with the soil and is resisted by friction, adhesion or passive / bearing capacity. To study …
Published in Journal of Geotechnical Engineering · Vol. 5, Issue 2, 2018 · pp. 15–19 Read article
-
Characterization and Fabrication of Hybrid Matrix Composites of AZ91E Metal with Distinct Reinforcements of Fly Ash and ZrO2
Abstract: The current work choose the characteristics of (Magnesium composite) AZ91E-ZrO2-Fly ash Hybrid Metal Matrix using the regular analytic system. The chosen materials for this purpose are fly ash and ZrO2 in equivalent load extents, Stir casting uses a vortex technique to produce composite materials. A comprehensive experimental investigation was conducted to assess the performance characteristics of AZ91E-ZrO2-Fly ash during the cold upsetting process. The study involved utilizing AZ91E magnesium alloy …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 Read article
-
Experimental Investigation of Polymer Composite-Based Protective Structures for Mitigating Crash-Induced Mechanical Abuse in Lithium-Ion Batteries
Abstract: The objective of this paper is to determine the effectiveness of using polymer composite protective structures to protect against the mechanical abuses associated with crash impacts that affect lithium-ion batteries in terms of their structural integrity and their overall safety. In addition to their use in electric vehicles, lithium-ion batteries are also being increasingly used in renewable energy-based energy storage systems because they have high energy densities, long lifetimes, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 113–132 Read article
-
Design and Performance Analysis of a 635 nm Ga0.5In0.5P/(Al0.7Ga0.3)0.5In0.5P Multiple Quantum Well Separate Confinement Heterostructure Red Laser Considering Thermal Limitations
Abstract: AbstractIn this work, the performance characteristics of a GaInP - based 635 nm multiple quantum well (MQW) separate confinement heterostructure (SCH) Red laser has been obtained through computations. The material gain of Ga0.5In0.5P/(Al0.5Ga0.5)0.5In0.5P MQW edge emitting laser (EEL) has been theoretically obtained. The peak material gain obtained from the analysis has been used for analyzing the performance of the designed double-heterostructure laser. A maximum output power of 71.18 mW and …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 1, 2013 · pp. 11–17 Read article
-
Application of Natural and Synthetic Polymer-Based Disintegrants in the Design of Fast Dissolving Cefuroxime Axetil Tablet Composites
Abstract: The current paper examines how natural and synthetic polymer-based disintegrants can be used to design fast-soluble types of tablet composites. A model drug was chosen and tablets were prepared by the direct compression method using different polymeric excipients, such as guar gum, locust bean gum, sodium starch glycolate (SSG) and cross povidone. Eight formulations were prepared and tested on the basis of critical material and performance characteristics including thickness, hardness, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1348–1360 Read article
-
Design and Performance Analysis of Microwave Filters and Resonators for High-Frequency Systems
Abstract: Microwave filters and resonators are fundamental components in high-frequency systems, playing a crucial role in signal selection, interference suppression, and frequency stabilization. This review presents a detailed analysis of design methodologies and performance characteristics of microwave filters and resonators used in modern communication and radar applications. Various filter topologies, including low-pass, high- pass, band-pass, and band-stop configurations, are examined with respect to their frequency response, insertion loss, selectivity, and bandwidth. …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 1, 2026 · pp. 8–16 Read article
-
Comparison of RSM and ANN Modeling Approaches in Predicting the Laser Phase Transformation Hardening Parameters on the Heat Input and Hardened-Bead Profile Quality of Unalloyed Titanium
Abstract: In the present work, laser transformation hardening (LTH) of unalloyed titanium, nearer to ASTM Grade 3 of chemical composition was investigated using CW 2kW, Nd: YAG laser. The laser process variables such as laser power, scanning speed, and focused position play a major role in deciding the laser hardened bead quality. Two methods, Response Surface Methodology (RSM) and Artificial Neural Network (ANN) were used to predict the heat input and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 1, 2015 · pp. 36–59 Read article
-
High Modulation Performance of a Designed InGaN Based 405 nm Multi-Quantum Well Violet Laser
Abstract: AbstractIn this work, the modulation performance characteristics of a designed 405 nm InGaN based multi-quantum well (MQW) Violet Laser are optimized and presented by varying injection current and differential gain. A maximum output power of 222.53 mW and a maximum resonance frequency of 18.79 GHz of the laser are obtained for 117 mA injection current, where, the differential gain is 4x10-16cm2. The differential quantum efficiency of the laser is obtained …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 2, 2013 · pp. 7–13 Read article
-
Artificial Intelligence for Polymer and Nanocomposite Materials: Performance Prediction, Manufacturing Optimization, and Future Perspectives
Abstract: The exceptional mechanical properties, design flexibility, and lightweight nature of polymer composite and nanocomposite materials make them indispensable in a wide range of applications, including aerospace, automotive, construction, biomedical, and energy sectors. The optimization of the strength, durability, and manufacturing efficiency of polymer composite and nanocomposite materials is highly challenging because their performance depends on matrix composition, reinforcement type, fiber or nanoparticle distribution, interfacial interactions, processing conditions, and environmental factors. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
CFD Analysis of a Bladeless Propelling Unit for the Drones
Abstract: Conventionally, unmanned aerial vehicles (UAVs) and autonomous aerial vehicles (AAVs) utilize bladed propellers to produce lift, altitude, and thrust for propulsion. Yet, these blades are susceptible to abrasion when they contact external surfaces, resulting in diminished operational efficiency over time. Our ongoing investigation introduces a pioneering approach by integrating bladeless propeller technology, drawing inspiration from Dyson’s Bladeless Fan Theory. This study seeks to address the wear-related shortcomings of conventional propeller …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 37–46 Read article
-
The Evolution of Ion Propulsion Systems: A Comprehensive Review of Technologies and Applications
Abstract: Field-Emission Electric Propulsion (FEEP) represents a cutting-edge advancement in electric propulsion systems, leveraging the principle of ion emission through intense electric fields to generate precise and efficient thrust for spacecraft. This study explores the working mechanisms, performance characteristics, and applications of FEEP thrusters in the context of modern space exploration. FEEP systems utilize liquid metals, such as cesium or indium, as propellants, which are ionized at the emitter tip and …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 16–22 Read article