Search
115 articles for “in silico characterization”
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Study the Effect of Applied Gate Voltage on Threshold Potential and Carrier Transport Behavior of Three-Terminal Novel Prototype Device having Configuration P-type Si/SiO2/CuFeS2/Al
Abstract: This study presents a trial approach for the fabrication and characterization of a novel p-Si/SiO₂/CuFeS₂/Al field-dependent three-terminal electronic device designed to investigate charge transport behavior across multiple semiconductor junctions under externally applied bias voltages. The proposed prototype incorporates CuFeS₂ (chalcopyrite) as the active semiconductor layer, marking its first reported application in a field-induced electronic device architecture. The device was fabricated using a layered heterostructure consisting of p-type silicon, a silicon …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 1–7 Read article
-
Molecular Characterization of Environmental and Clinical Non Tuberculous Mycobacteria Isolates from Copper Mines and Miners in Zambia
Abstract: Background: The active and ex-miners have high risk factors for Non Tuberculous Mycobacteria (NTM) disease due to the high burden of Human Immunodeficiency Virus (HIV) infection, tuberculosis and silicosis through extensive use of aerosolised water for dust control in the mining environment. The study aimed at the isolation and characterization of nontuberculous mycobacteria from the miners and ex-miners in Zambia. Methods: Sputum samples were collected from 85 miners and ex-miners132 …
Published in Research and Reviews : A Journal of Immunology · Vol. 13, Issue 3, 2023 · pp. 30–39 Read article
-
In Silico Molecular Docking Studies of Phytoconstituents Identified in Curcuma zedoaria Rosc. on Acetylcholinesterase: An Enzyme Target for Anti Alzheimer’s Activity
Abstract: Alzheimer’s disease (AD) is a chronic, progressive and disabling organic brain disorder characterized by disturbances of multiple cortical functions. Acetylcholinesterase (AChE) inhibition is thought to be a promising approach towards the treatment of AD. The aim and objective of the present study is to perform in-silico docking analysis of the major active constituents identified in Curcuma zedoaria Rosc. against AChE for anti-Alzheimer’s activity. In this perspective, phytoconstituents like bisdemethoxy curcumin, …
Published in Research and Reviews : Journal of Computational Biology · Vol. 8, Issue 3, 2019 · pp. 9–14 Read article
-
Synthesis and Characterization of MoS2 for OLED Application
Abstract: The current research work was carried out to synthesis the Molybdenum disulfide. Molybdenum disulfide has been synthesis by liquid exfoliation technique is synthesis with the help of chemical method. After that we have performed various characterizations to study the Molybdenum Disulfide to find its optical, structural & electronic properties by UV – vis, FTIR, Raman, SEM and AFM. MoS2 also coated on a silicon wafer with the help of spin …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 21, Issue 3, 2019 · pp. 28–40 Read article
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
In Silico Stability Analysis and Phosphorylation Induced Structural Simulation of Alpha-synuclein in Parkinson’s disease
Abstract: Alpha-synuclein (α-syn) is the major component of pathologic inclusions that characterizes neurodegenerative disorders such as Parkinson’s disease (PD), dementia with Lewy body disease, and multiple system atrophy. Mutations and phosphorylation of α-syn causes familial PD. Phosphorylation of α-syn at TYR125 and SER129 plays an important role in PD and enhances its partial digestion by calpains leading to its aggregation; however, the exact mechanism is unknown. The present study uses in …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 2, Issue 1, 2015 · pp. 15–21 Read article
-
An overview of Nanocrystalline Hydrogenated Silicon Thin film Transistor
Abstract: This article elaborates and comprehends an overview on nc-Si:H TFT's, detailing and highlighting the topics like fabrication methodology, properties/stability, modelling, characterization techniques, challenges and futuristic scope/applications.With the growing demands in commercialization of Solar Cells (low-cost photo voltaic devices), Large Area Displays (like OLED’s), Thin film electronics (FPD applications), pixel switches, wearable/flexible electronics and so on, has prompted researchers to develop nc-Si:H TFT's (an alternative solution) which can out perform the …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 1–23 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Patterning of Carbon Nanotubes on Silicon Wafer Using Self-Assembly Techniques
Abstract: Nanotechnology is an emerging technology that enables scientists to develop new materials and products at the molecular level. A carbon nanotube (CNT) is a rolled sheet of carbon atoms, coaxially arranged in cylindrical shape. Single-walled CNTs are ideal quantum systems for exploring basic science in one dimension. To find use in electronics, single-walled CNTs need to be efficiently separated by electronic type and aligned to ensure optimal and reproducible electronic …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 2, 2015 · pp. 6–15 Read article
-
Nanowire Photodetectors and Applications: A Review Study
Abstract: The utilization of nanowires and nanowire structures as photodetectors is an arising research subject. Novel gadget structures incorporated in single nanowire gadgets are additionally being effectively contemplated and created. Here, general NW-PD ideas are investigated, along with a point-by-point depiction of the actual phenomenon happening in nanowire photoconductors & phototransistors. Low dimensional frameworks like nanotubes and nanowires have intriguing, and technologically valuable, optical and electrical properties. Studies on these frameworks …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 2, 2024 · pp. 15–19 Read article
-
Nanowire Photodetectors and Applications: A Review Study
Abstract: The utilization of nanowires and nanowire structures as photodetectors is an arising research subject. Novel gadget structures incorporated in single nanowire gadgets are additionally being effectively contemplated and created. Here, general NW-PD ideas are investigated, along with a point-by-point depiction of the actual phenomenon happening in nanowire photoconductors & phototransistors. Low dimensional frameworks like nanotubes and nanowires have intriguing, and technologically valuable, optical and electrical properties. Studies on these frameworks …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 2, 2024 · pp. 15–19 Read article
-
Molecular Docking Studies of Moringa concanensis Nimmo Leaf Phytocompounds for Brain Cancer
Abstract: Phytochemicals are the secondary metabolites of medicinal plants and are considerably used in traditional cancer research. Computational methods involving virtual screening, shape and pharmacophore analysis and molecular docking have been used to select chemicals that target a particular protein or enzyme and to determine potential protein targets for well characterized as well as for novel phytocompounds. Objective of the present study is, in silico approach to identifying the anticancer activity …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 8, Issue 1, 2018 · pp. 26–34 Read article
-
Electrical Performance of the Silicon Nanowire Double Gate FET
Abstract: Silicon nanowire (SiNW) metal-oxide-semiconductor field-effect transistor (MOSFET) is a promising candidate of future CMOS device for further scaling. As the cross-sectional dimensions of SiNW channel is very small, cross-sectional shapes should affect electrical characteristics of SiNW FETs. In this work, effects of cross-sectional shapes of gate stack formation on (i) properties of double gate of SiNW FET; (ii) carrier transport properties including on-current, effective carrier mobility and inversion charge density; …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 3, 2020 · pp. 5–11 Read article
-
In silico analysis of Abrus precatorius L. as a potential agonist of PPARγ : A novel approach to the treatment of diabetes
Abstract: Diabetes mellitus is a chronic disorder that is characterized by a lack of insulin secretion by the pancreas or a defect in insulin action, or both. If diabetes is not controlled, over time it can cause damage to blood vessels and nerves, leading to life-threatening complications such as, kidney damage, heart disease and vision impairment. It can also weaken the immune system, making patients more prone to infection. Although treatments …
Published in International Journal of Molecular Biotechnological Research · Vol. 3, Issue 2, 2025 · pp. 13–24 Read article
-
Vibration Mechanics of Hybrid Al 5083/SiCp/Fly Ash Composite Plates for its Use in Dynamic Structures
Abstract: Metal Matrix composites are a unique class of materials, with specific characteristics. The selection of reinforcement phase for reinforcing the metal matrix depends on many parameters and is a major concern, Silicon carbide particulates (SiCp) enhances the hardness of specimens but on the other hand it induces brittleness in the specimen which is of major concern, henceforth fly ash particulates are thought of as an alternative reinforcement for improving the …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 1, 2017 · pp. 11–18 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Impact of Semiconductor Material Properties on Device Behavior and Circuit Performance: A Comprehensive Review
Abstract: Semiconductor materials play a fundamental role in determining the performance, efficiency, and reliability of modern electronic devices and circuits. This review presents a comprehensive analysis of how intrinsic and engineered material properties influence device behavior and overall circuit functionality. Key parameters such as bandgap energy, carrier mobility, thermal conductivity, and defect density are examined to understand their direct impact on switching speed, power consumption, and operational stability. The paper explores …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 · pp. 19–26 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Development and Characterization of Al2O3-SiC Graphite Reinforced Al7075 Hybrid Composite
Abstract: The aim of the present investigation is to carry out a study of mechanical properties of aluminium alloy (7075) reinforced with silicon carbide, aluminium oxide and graphite. This composite is produced by the vortex method. The constituents of the composite are mixed uniformly by stirring action. Due to rotation of a mechanical agitator, hence creating vertex by stirring of molten metal, then by adding ingredients, the product was produced. Then …
Published in Trends in Machine design · Vol. 6, Issue 2, 2019 · pp. 15–21 Read article