Search
552 articles for “engineering properties”
-
Stabilization of Alluvial Soil by using Boiler Feed Ash
Abstract: The feasibility of using industrial wastes, boiler feed ash (BFA) (rice husk-based) from an oil mill for soil stabilization was studied. The waste material is produced as an industrial by-product in the boiler of the oil mill; the waste contains silica compound up to 85%, hence it can be used as a stabilizing agent. The effects of adding BFA on Proctor's density, Atterberg’s limits, soil plasticity and the CBR value …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 1, 2015 · pp. 29–33 Read article
-
Role of Cement and Fly Ash in Soil Stabilization
Abstract: Soil stabilization changes the engineering properties of soil and produces strength and stability. Use of industrial wastes and manufactured materials in soil stabilization can be cost effective and environmental friendly. As there is a growth of habitations surrounding the PSIT campus, therefore, soil samples collected from this area were analyzed for its plasticity index properties. It was found that soils of this area come under low plastic category. Hence, the …
Published in Journal of Geotechnical Engineering · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Performance of Circular Model Footing Resting on Sand Bed Reinforced with Vertical Reinforcement in Dry Condition
Abstract: Soil stabilization is the process of improving the engineering properties of the soil. The good old method of stabilization is by using the chemicals stabilization, whereas the recent method of improving the strength of the soil is by using the vertical reinforced earth. In the present work sand is filled in the 250x250x375 mm MS tank by using sand raining technique at a relative density of 67%. MS circular plate …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 1–9 Read article
-
Geopolymerization: A Review on Physico-chemical Factors Influence to the Reaction Process
Abstract: A geopolymer is one of materials belonging to an inorganic polymer group based on alumino-silicate structural networks. The material is a product of reactions among the activated alumino silicate resources and solutions of alkaline activators in various conditions. There have been many investigations conducted to produce geopolymer using different raw materials and methods. The chemical factors have a decisive role in the reaction process and the formation of the geopolymeric …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 1–9 Read article
-
Experimental Investigation of Self-Compacting Concrete Using Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during their usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogenous …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article
-
Effect of Fiber Addition in Geopolymer Concrete: A Study on Comparison betweenNatural and Artificial Fibers
Abstract: Geopolymer concrete is an inorganic polymer concrete, containing no ordinary Portland cement (OPC). It is produced by reacting alumino-silicate source material with alkaline solution. Geopolymer concrete has highly desirable structural engineering properties, which can lead to significant environmental and economic benefits. Fibers in general and polypropylene (PP) fibers in particular have gained popularity in recent years for use in concrete, mainly owing to their low price and excellent characteristics. Alkalineliquids …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 18–24 Read article
-
A Review on Mechanical Behavior of Various Strength And Flexure Parameters on Hardened High Strength Fiber Reinforced Concrete (HSFRC)
Abstract: This Review paper presents the Study for effective use of different shapes Steel Fibre for enhancing Flexural capacity of High Strength Concrete Beam, Along with Compressive & tensile strength. The flexural tensile strength or modulus of rupture (MOR) of concrete generally referred to tensile strength is an important parameter for determining deflection, minimum flexural reinforcement and to compute the on-set of visible cracks in a concrete structure under flexure. It …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–5 Read article
-
An Evaluationof Different Types Soil Stabilization Techniques
Abstract: Soil stabilization is the procedure of improving the shear strength parameters of soil and so increasing the bearing capability of land.It is needed when the territory available for construction is not suited to carry structural load. Soils exhibit generally undesirable engineering properties. Soil Stabilization is the modification of soils to raise their physical attributes.Stabilization can increase the shear intensity of a territory and/or control the shrink-swell properties of a stain, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 40–48 Read article
-
Experimental Investigation of EAFS Aggregate Concrete by Partially Replacing Cement with Single Blended SCMs Fly Ash, GGBS and UGGBS for Sustainable Concrete
Abstract: This study represents research work on the effect of electric arc furnace slag (EAFS) aggregate containing concrete with the utilization of different secondary cementitious materials (SCMs) in single blending, which is the extension of our previous work to optimize EAFS aggregate in concrete. We found 50% EAFS aggregate replacement performance comparatively better as compared to natural aggregate. A total of 12 concrete mixes were cast in different single blended SCMs …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 28–35 Read article
-
EVALUATING THE EFFECT OF SNAIL SHELL ASH AS A FILLER IN HOT MIX ASPHALT
Abstract: Filler play an important role in engineering properties of bituminous paving mixes. Conventional, cement, lime and stone done are used as fillers. In this study, an attempt has been made to access the effect of a non-conventional filler (snail shell ash) experimental procedure was adopted using Marshall Stability method to analyze the following parameter. Stability, flow, void in mineral aggregate, void in mix and void filled with bitumen. The filler …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 1–11 Read article
-
UTILIZATION OF INDUSTRIAL AND MUNICIPAL WASTE MATERIALS IN SOIL STABILIZATION OF RURAL ROADS: A REVIEW
Abstract: In India, the growth of rural sector directly depends on the road connectivity, which provides the platform and sustainability for economic activities in rural areas. However, difficult topography and unstable geology make the rural road constructions hard. Therefore, the locally available waste materials can be utilized to improve the soil characteristics and can promote the low cost road construction. The present Study is aimed to review the improvement of engineering …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 40–44 Read article
-
Review in Friction Stud Welding Of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 3, 2021 · pp. 19–24 Read article
-
Evaluation of Mechanical Properties of Hybrid Fibers in Concrete
Abstract: Engineering Cementitious Composites (ECC) is an advanced growing method to increase the longevity of the structure in all behaviour aspects. ECC consist of cement, fine aggregate, fiber and water.High performance, ductility and durability of cementitious matrix can be achieved by addition of fiber. Nowadays, the member of fibers play a vital role to increase the overall structural behaviour of concrete matrix. In that, synthetic-based fibers are used in various applications. …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 1–5 Read article
-
Impact of Semiconductor Material Properties on Device Behavior and Circuit Performance: A Comprehensive Review
Abstract: Semiconductor materials play a fundamental role in determining the performance, efficiency, and reliability of modern electronic devices and circuits. This review presents a comprehensive analysis of how intrinsic and engineered material properties influence device behavior and overall circuit functionality. Key parameters such as bandgap energy, carrier mobility, thermal conductivity, and defect density are examined to understand their direct impact on switching speed, power consumption, and operational stability. The paper explores …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 · pp. 19–26 Read article
-
Mechanical Properties and Temperature distributionofHard Facingof SS-304 steelby using SAW
Abstract: Surface engineering is a multidiscipline activity aimed at tailoring the properties or surfaces of engineering materials to improve their function or service life. Mostly; as applied to metals, surface engineering includes processes; such as plating, diffusion treatment, physical and chemical vapor deposition, ion implantation, thermal spray coatings, selective hardening, hard facing, and a variety of less-used and proprietary processes. However; these processes will be described briefly and it will be …
Published in Journal of Automobile Engineering and Applications · Vol. 5, Issue 1, 2018 · pp. 18–29 Read article
-
Impact of Layer Height and Infill Line Orientation On 3D Printed Components Produced Via Additive Manufacturing
Abstract: Additive Manufacturing (AM) is an extrusion-based technique used to create objects by extruding semi-molten material through a nozzle of specific dimensions. Materials like acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), polycarbonate (PC), and others are commonly employed in this process to manufacture industrial components. The mechanical properties of engineering component are critical for various industrial applications. This study investigates the impact of additive manufacturing on fabrication, considering different process parameters. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 315–323 Read article
-
Microstructural Design and Functional Properties of Polycrystalline Materials
Abstract: Polycrystalline materials, composed of an aggregate of crystallites or grains, are foundational to modern engineering applications due to their versatile functional properties. The microstructural design—encompassing grain size, shape, orientation, phase distribution, and grain boundary characteristics—plays a pivotal role in determining mechanical, thermal, electrical, and magnetic behavior. This abstract explores the intricate relationship between microstructure and functionality, emphasizing how tailored processing techniques such as thermomechanical treatments, sintering, and additive manufacturing can …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 16–20 Read article
-
Evaluation of Diesel Engine Performance and Emissions Using Algal Biodiesel
Abstract: Algal material has captivated the attention as renewable fuel without imposing any impact on global food markets with high biomass productivity with their ability to convert CO2 to fuel, and wastewater treatment. This work has been carried to use algal biodiesel blends as fuel in a DI (direct injection) diesel engine. The fuel properties of AB10, AB20, AB30 and AB50 along with engine performance (BP and BSFC) and emissions (CO, …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 11, Issue 1, 2020 · pp. 37–43 Read article
-
RCCI Engine: Performance and Emission Testing Using Biodiesel
Abstract: With dwindling fossil fuel reserves and rising energy demands, the need for renewable alternatives is more critical than ever. This study explores the potential of Karanja biodiesel, a fuel derived from Karanja oil, as a sustainable replacement for diesel in RCCI engines. Karanja biodiesel offers several advantages. It's renewable, reduces dependence on fossil fuels, and produces lower emissions compared to traditional diesel. This research investigates how Karanja biodiesel blends impact …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 30–41 Read article
-
MODELLING HETEROGENEOUS POROSITY IN ALLUVIA PLAIN DEPOSITION IN DELTAIC FORMATION
Abstract: Abstract Porosity of soil are basically determine for various purpose, but this papers monitor degree of porosity in alluvia plain deposition under heterogeneous lithostratification, the study examine the predominant deposition of heterogeneous porosity in alluvia plain, such condition were observed in deltaic environment, such heterogeneous degree of porosity will definitely affect other engineering soil properties, this paper try to effectively investigate and determination of total evaluation for such heterogeneous porosity …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 1–10 Read article