Search
42 articles for “slotted patch”
-
Design of a Fractal Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: Ultra wide band frequency allocation of 5.3–9.2 GHz spectrum by Federal Communications Commission (FCC) presented myriad applications of exciting opportunities and challenges for design in the communication arena, including antenna design. The compact antenna designs with operating bandwidths of more than 100% are a challenging demand for the current wireless scenario. This can be easily met with fractal boundaries by using wide slot antennas. In this paper, fractal slot antenna …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 19–22 Read article
-
Quad-Band Notched Small Monopole Antenna with U-shaped Slots and SRRs for UWB Applications
Abstract: A quad-band notched small monopole antenna with U-shaped slots and SRRs for UWB applications is presented in this study. The quadruple band-notched characteristics can be achieved by embedding three U-shaped slots on the radiation patch and two split ring resonators (SRRs) near feed line, respectively. It has a tiny size, only 17 mm23 mm0.508 mm. The experimental and measured results demonstrate that the proposed antenna offers an impedance bandwidth across …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 21–31 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
Cylindrical Dielectric Resonator Antenna With Rectangular Patch
Abstract: DRAs are used for 5G communications of huge bandwidth from millimeter to Terahertz. high facts charge is performed through the channel ability i.e. C=Blog2(1+SNR) where C is the channel capacity and B is the bandwidth of the channel. The cylindrical resonator antenna operating in hybrid HEM11 mode. in this paper a cylindrical dielectric resonator antenna (CDRA) with frequency range (26GHz).The cylindrical dielectric resonator with radius r=1.45mm and height h=1.4mm. the …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 1, 2022 · pp. 9–15 Read article
-
Wideband Microstrip Slot Antenna Using Shape Blending Algorithm
Abstract: For the effective wireless communication over long distances, the antennas with wideband operation and narrow beam widths are the requirements for the evolving modern mobile devices. This paper presents the design and analysis of the wideband patch antenna with slot using shape blending algorithm. The major advantage of this algorithm is to optimize the shape of the radiating element by applying Heaviside function to improve the performance characteristics of the …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 1, 2022 · pp. 19–27 Read article
-
Design and Performance Analysis of an UWB Wearable Patch Antenna for WBAN Applications
Abstract: In this paper we represent an ultra-wide band wearable textile antenna for body area network. The proposed antenna consists of a decagonal radiating patch and a partial ground plane with a square slot. For textile antenna, the textile materials and the planer shapes provide a smooth integration into clothing while preserving the characteristic properties of the textile. The ultra-wide band for these types of antenna is achieved by optimizing the …
Published in Journal of Communication Engineering & Systems · Vol. 7, Issue 3, 2017 · pp. 1–7 Read article
-
A Novel High Gain Cavity Backed Micro Strip-Fed Circular Triangular Corner Fractal Antenna for UWB Applications
Abstract: In the current article, a novel micro strip-fed circular triangular corner fractal unidirectional antenna with high gain is proposed for ultra wideband (UWB) applications. This antenna consists of circular patch with triangular slot with three iterations. A prototype of antenna has been designed on FR4 substrate having dielectric constant 4.4 and thickness 1.6 mm. This reference antenna is then placed in a cavity made up of FR4 having thickness same …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 19–24 Read article
-
Design and Simulation of E-Shape Micro-strip Patch Antenna at 2.45GHz
Abstract: AbstractThis paper presents comparison of rectangular micro strip patch antenna and E-Shaped micro strip patch antenna operating at 2.45GHz. Two parallel slots are made into the basic rectangular patch design of micro strip antenna which resulted into desired E-shaped patch. The basic design consist of inset feed type and we have used dielectric substrate Fr4 epoxy whereas E-shaped patch consist of coaxial probe and RT Duroid as substrate. Both the …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 17–24 Read article
-
Circularly Polarized Microstrip Fed Antenna for Dual Frequency
Abstract: Abstract: The presented antenna is designed for achieving dual frequency characterized circularly polarized behavior. The achievement of dual frequency is done by coupling of the microstrip feed line arrangement with the annular slot shaped with four unequal arms type of slot structure on the patch. The Reflection coefficient, pattern of radiation of the antenna and the Axial ratio are simulated. The impedance bandwidths obtained for lower of (RHCP) is 25% …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 1–5 Read article
-
Advanced 4-Element UWB-MIMO Antenna Design: Achieving High Isolation and Multi-Band Rejection for Advanced Wireless Applications
Abstract: In this study, we present the design, fabrication, and analysis of a step-by-step Ultra-Wideband (UWB) Multi-Input Multi-Output (MIMO) antenna operating from 3 to 14 GHz. The antenna consists of four elements, each characterized by high isolation and equipped with four band-rejection features. These elements are implemented on a Rogers substrate with εr=3. Each antenna element is a modified rectangular patch, incorporating partial ground etching to achieve wider bandwidth. Two sets …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 40–62 Read article
-
Design, Analysis and Comparison of Conventional and Millimeter Wave Antenna
Abstract: A parameter study was performed of a novel printed quasi-Yagi antenna with regard to its design at microwave and millimeter wave frequencies and its application. A rectangular-shaped slot was incorporated into patch and Yagi antenna as a patch was used with a coplanar waveguide (CPW) as a feeding structure. Using same structure with different dimensions, the increment in frequency from 4.4 GHz to 30 GHz and the antenna gives better …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 3, Issue 1, 2016 · pp. 20–24 Read article
-
The Design and Analysis of a High Bandwidth Patch Antenna Loaded with Double-L shaped Parasitic and Super-Strate Components
Abstract: A patch antenna having parasitic components in the shape of a double-L. It is shown how to make a directional slot antenna using a parasitic patch and a windowed superstrate. The recommended antenna may readily obtain high-gain properties due to its composition. The suggested antenna's impedance bandwidth has been measured. Internet of Things (IoT) apps to make their data more accessible, wireless communication technology integration is required. This work proposes …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 1–13 Read article
-
Design and Validation of Slot Coupled Rectangular Half Mode SIW Antenna
Abstract: This paper presents the design and performance analysis of a Rectangular Half Mode Substrate Integrated Waveguide (HMSIW) antenna configuration to attain higher gain and multiband characteristics with the compact size. It is possible to produce multiband properties by placing variously shaped slots on the top of the patch and ground surface. To attain the necessary gain and multiband resonance characteristics, the type of the slot, dimension optimization, and position optimization …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 10, Issue 2, 2023 · pp. 14–21 Read article
-
Design of Ultra-Wide Band Slotted PIFA for Wireless Devices
Abstract: The design of an ultra-wideband planar inverted-F antenna (PIFA) is proposed for mobile phone applications in this paper. The different slots are introduced on radiating patch and ground plane. The volume of the radiating antenna is 40x40x3.5 mm3 which is small as compared to reported work. The ultra-wide bandwidth with acceptable return loss –6 dB is obtained from 4.6 to 30 GHz with good matching and radiation characteristics. Different performance …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 2, 2016 · pp. 1–6 Read article
-
Circular Antenna with Square Slot at 2.1 GHz for RF Energy Harvesting Applications
Abstract: In this paper, a single band circular antenna loaded with square slots having an application in RF energy harvesting is introduced. Proposed antenna containing of a circular antenna along with square slot loaded inside in the patch. For an antenna design, Computer Simulation Technique (CST) solver simulator was used. The antenna is being fabricated and its characteristics were measured. The band is covering most of the wireless applications. The simulated …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 22–24 Read article
-
Frozen Waves: Double T-Shape Patch Antenna Sensor for Precise Ice and Snow Measurement
Abstract: To design a Micro strip patch antenna with double T shaped slots at operating frequency 2.4GHz was developed for ice detection and measurement application. Detection was performed by monitoring the resonance frequency and amplitude of the transmission coefficient between the antenna sensor and a broadband receiver. The patch antenna sensor is also capable of distinguishing between ice and water, respectively when compared to the bare sensor. The antenna was also …
Published in Journal of Control & Instrumentation · Vol. 14, Issue 3, 2023 · pp. 15–20 Read article
-
Enhancement in RMPA Parameters using Slotted Rhombus Connected Square Shaped Antenna with Left Handed Metamaterial
Abstract: In this paper, rectangular microstrip patch antenna (RMPA) along with metamaterial which has design of “slotted rhombus connected with rectangular shaped cover structure” is proposed at height of 3.2 mm from the ground plane. The RMPA with proposed metamaterial structure is designed to resonate at 2.7 GHz frequency. This work is mainly focused on increasing the potential parameters of microstrip patch antenna. Proposed metamaterial design structure significantly reduces the return …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 1, 2017 · pp. 49–54 Read article
-
Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract: AbstractWith the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article
-
A Compact Design of Dual Band Micro Strip Antenna for WLAN/WiMax Applications
Abstract: In this paper compact dual wide band micro strip antenna has been designed with line feed technique. The return loss bandwidth achieved is 12.34% (1.398–1.582) GHz and 21.56% (2.395–2.974) GHz with a maximum return loss –44.89 dB at resonant frequency 2.656 GHz by using Zeland IE3D software. The fabricated line feed patch antenna is tested and measured by using spectrum analyzer.
Published in Journal of Microwave Engineering and Technologies · Vol. 1, Issue 3, 2014 · pp. 1–6 Read article
-
Broadband Rectangular Top Shaped Slotted Antenna at 2 GHz for WLAN Application
Abstract: The present study is regarding the design of a broadband rectangular top shaped slotted microstrip antenna with linear polarization radiation. The glass epoxy dielectric material is used for substrate and single rectangular microstrip radiating patch. Rectangular antenna is designed for WLAN technology. We first analyze the characteristics of microstrip antenna and design for the high bandwidth. The results show that the proposed antenna is able to achieve a bandwidth of …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 1, 2015 · pp. 1–4 Read article