Search
112 articles for “fill factor”
-
Study of Performance of Photoelectrochemical Cell for Solar Energy Conversion and Storage in Carbol Fuchsin-CTAB-EDTA System
Abstract: Power storage capacity is becoming more necessary as wind and solar power sources rapidly enter the commercial market. The Photoelectrochemical Cell as they are described in the current manuscript are promising energy technologies since they allow for the generation and storage of solar energy. In addition to the requirement for power storage, photoelectrochemical Cell (PEC) are particularly important because these solar devices can produce and store solar power simultaneously. Photoelectrochemical …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 47–55 Read article
-
Modeling and Performance Analysis of Gallium Arsenide Based P-I-N Solar Cells
Abstract: Current technology has made a lot of inspection and also facing many difficulties for optimizing a solar cell’s efficiency. Many previous works had been done on p-n junction solar cells to achieve the maximum performance. But a few researches show us that the performance of p-i-n solar cell has not yet reached its optimum level. Thus in this paper we concentrate on an analysis of Gallium Arsenide based p-i-n solar …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 2, 2015 · pp. 23–27 Read article
-
Effect study of Cu2O in Perovskite (CH3NH3PbX3, X: I, Br, Cl) Solar Cell as Hole Transport Layer
Abstract: AbstractThe detailed modeling and mathematical simulation on perovskite solar cells have been performed with three various perovskite materials, such as “methyl ammonium lead trial halide (MAPbX3, MA= CH3NH3, X: I, Br, Cl)” with aid of solar cell capacitance simulator software (SCAPS) tools. The electrical possessions of MAPbX3 material performed as “active layer” and measured different parameters such as “open-circuit voltage (Voc), fill factor (FF), power conversion efficiency (PCE), and short-circuit …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 1, 2020 · pp. 5–10 Read article
-
Effect Analysis of Different ETL Layer Thickness in Perovskite (CH3NH3PbI3) Solar Cell Using CuSCN as Hole Transport Layer
Abstract: Thickness of Electron Transport Layer (ETL) shows an important role in terms of stability and efficiency of perovskite solar cells. In this paper, numerical simulation and detailed modeling on perovskite solar cell was carried out using perovskite material such as methyl ammonium lead iodide (MAPbI3, MA= CH3NH3) at various thickness’s of ETL layer using the SCAPS tool. The electrical properties of the “MAPbI3 material” used as active layer for different …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Performance analysis of ETL/Absorber and Absorber/HTL Interface Layer on Perovskite (CH3NH3PbX3, X: I) Solar Cell
Abstract: The effectiveness of perovskite solar cells employing perovskite materials such as methyl ammonium lead tri halide (MAPbX3, MA=CH3NH3, X:I) has been investigated in this research with the use of the SCAPS tool. The electrical properties of the MAPbX3 material utilized for the active layer have been calculated through numerical simulation and modelling for various parameters, including open-circuit voltage (Voc), power conversion efficiency (PCE), fill factor (FF), and short-circuit current density …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 8–14 Read article
-
Enhanced Photovoltaic Performance of Perovskite Solar Cell Using Copper Thiocyanate (CuSCN) as Hole Transport Layer
Abstract: In this study, the SCAPS tool was utilized to examine the efficacy of perovskite solar cells using perovskite materials such methyl ammonium lead Iodide (MAPbX3, MA=CH3NH3, X: I). Quantitative simulation and modeling have been used to determine the electrical characteristics of the MAPbI3 material used for the active layer for a number of parameters, including fill factor (FF), short-circuit current density (Jsc), power conversion rate (PCE), and open-circuit voltage (Voc). …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 3, 2024 · pp. 12–18 Read article
-
Thin Film Gum Arabic Doping byPotassium BromideSolar Cells
Abstract: Three solar cell were made using Gum Arabic treated with potassium bromide with three types of dyes (Saffron dye, Henna dye and Blue 8GX dye) by using Spin Coating. Powder of gum Arabic and amount of potassium bromide was made by heated in temperature 100OC firstly, and using USB 2000 spectrometer device to calculated optical energy band gap of Gum Arabic before and after doping It was found to be …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 23–29 Read article
-
Interface Engineering of Graphene Multi-Junction InGaP/GaAs/InGaAs/Ge Solar PVC
Abstract: AbstractThe main impediment faced by solar Photo-Voltaic Cell (PVC) is the excitation of charge carriers by high and low energy photons to make them reach the conduction band as this superintends the output device current. To enhance the device current, intermediate engineering of solar PVC is the most prominent strategy. An Inter-Mediate Layer (IML) serves as a spectrally selective layer between the muti-junctions for tandem solar cell. This research work …
Published in Trends in Opto-electro & Optical Communication · Vol. 8, Issue 1, 2018 · pp. 1–7 Read article
-
Effect of ETL layer thickness on perovskite (CH3NH3PbI3) solar cell
Abstract: Abstract: Thickness of ETL (Electron transport layer) shows important role in term of stability and efficiency of perovskite solar cells. In this paper the numerical simulation and extensive modeling have been performed on perovskite solar cell using perovskite material such as methyl ammonium lead Iodide (MAPbI3, MA=CH3NH3) with the help of SCAPS tool. The electrical properties of the MAPbI3 material used as active layer, have been calculated for different parameter …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 1, 2019 · pp. 32–37 Read article
-
Impact Analysis of Different Active Layer (CH3NH3PbI3) Thickness Using Cu2O as Hole Transport Layer in Perovskite Solar Cell
Abstract: AbstractThickness of active Layer (CH3NH3PbI3) shows important role in term of stability and efficiency of perovskite solar cells. In this paper the numerical simulation and extensive modeling have been performed on perovskite solar cell using perovskite material such as methyl ammonium lead Iodide (MAPbI3, MA=CH3NH3) at different thickness with the help of SCAPS tool. The electrical properties of the MAPbI3 material used as active layer, have been calculated for different …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 2, 2020 · pp. 15–20 Read article
-
Co-Doping of Titanium Dioxide with Zinc and Nitrogen for Improvement of Dye Sensitized Solar Cell Performance
Abstract: Energy will be one of the major problems all over the world in coming decades, as the natural energy sources will be exhausted soon. Solar energy will be a best alternative energy sources to solve this problem. Different types of solar cells have been fabricated for solar energy conversion into electricity. In the present work, dye sensitized solar cell (DSSC) has been fabricated by co-doping of TiO2 with Zn (metal) …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 6, Issue 3, 2015 · pp. 1–7 Read article
-
Layered Filler Based Nanocomposite Polymer Electrolyte For Solar Cell Application
Abstract: In the present work we fabricated natural dye sensitized solar cell using PVA based nanocomposite polymer electrolyte with MMT Clay (Montmorillonite) as layered filler in order to improve the conductivity of polymer electrolyte. In this work, we applied TiO2-WO3 to natural dye sensitizer solar cells as a photoelectrode to reduce the recombination rate by providing energy barrier and we also explore the use of natural dyes, betacyanin obtained from the …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 7, Issue 1, 2017 · pp. 15–19 Read article
-
Analysis of Efficiency Loss in AlGaAs/GaAs Hetero-junction Solar Cell
Abstract: Energy conversion efficiency is a major issue for photovoltaic cells. One of the main challenges of modern day research is to improve the efficiency level of photovoltaic devices by introducing new materials and advanced concepts. The target is to reach a high efficiency level within affordable cost, which will lead to a mass generation of electricity using photovoltaic devices. III-V hetero-junction solar cell has been introduced and characterized here, which …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 6, Issue 3, 2016 · pp. 26–33 Read article
-
Impact of ETL/Absorber Interface layer on Perovskite (CH3NH3PbX3, X: I, Br, Cl) Solar Cell
Abstract: In this paper, the impact of ETL/Absorber interface layer has been studied on the efficiency of perovskite solar cell using perovskite materials such as methyl ammonium lead trihalide (MAPbX3, MA=CH3NH3, X: I, Br, Cl) through the SCAPS tool. Modeling and the numerical simulation have been performed with electrical properties of the MAPbX3 material used as the active layer and calculated different parameters such as open-circuit voltage (Voc), power conversion efficiency …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 21, Issue 2, 2019 · pp. 1–6 Read article
-
Numerical Simulation and Performance Characteristics of Solid-state Dye-sensitized Solar Cell using SCAPS 1D
Abstract: In this research article, we studied the optimization and performance of a titanium oxide (TiO2) working electrode for the manufacture of solid-state dye sensitized solar cell (so-DSSC). The structure of solid-state dye sensitized solar cell used in current work is composed of FTO/TiO2/N719/PEDOT: PSS/Pt. The only variable for simulation is absorber layer. The computational simulation findings indicate that parameters of solid-state DSSC such as VOC, JSC, FF and PCE are …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 23, Issue 2, 2021 · pp. 1–11 Read article
-
A New Numerical Method for the Analysis of Stress Concentration in Tension Specimen
Abstract: Analyzing the stress concentration in the critical region of a mixed boundary value elastic problem has always been an important area of interest in applied mechanics. In most of the cases, the problems were circumvented using a numerical solution. A numerical approach has been used to solve elastic problems of arbitrary shaped bodies subjected to mixed boundary conditions. The formulation of displacement potential function is used in finite difference method …
Published in Journal of Experimental & Applied Mechanics · Vol. 3, Issue 1, 2012 · pp. 1–16 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Hybrid Composite Behavior of Concrete-Filled Steel Tube (CFST) Columns: Review of Collapse Mechanisms and Polymer-Based Enhancements
Abstract: Concrete-Filled Steel Tube (CFST) columns are an advanced hybrid composite system where the steel tube's confinement and the concrete core's load capacity work together to improve structural performance. While commonly used in civil engineering, CFSTs can also be understood within the framework of composite materials, similar to polymer- and fiber-reinforced composites, in which interactions between phases determine strength, ductility, and failure modes. This review compiles experimental and numerical research on …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 78–97 Read article
-
Surface Modified Abaca Fibers: Physico-Mechanical, Morphological and Degradation Properties Evaluation
Abstract: Lignocellulosic fibers are used as cost-cutting fillers in plastics factories. Amid several factors, the ultimate performance of composite ingredients depends on the bond between the matrix resin and the filler, and hence on the quality of the interface. To acquire optimal performance of the end product, adequate interaction between the matrix and the lignocellulosic ingredient is preferred. This is often acquired through surface modification of the matrix or filler. Abaca …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 34–46 Read article