Search
940 articles for “fabric”
-
Impact of Red Stone Dust and Polymer Fabric in Enhancing the Properties of Black Cotton Soil
Abstract: To enhance the mechanical properties of problematic black cotton soil, engineers are focusing on reinforcing the soil with geosynthetic materials. This attention is particularly directed towards improving the strength characteristics of black cotton soil, given its inherent challenges associated with volume changes and plasticity. In this comprehensive study, red stone dust waste is introduced in varying percentages ranging from 5% to 35% to stabilize the black cotton soil. The goal …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 35–43 Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
SUSTAINABLE MEMBRANE FABRICATION USING GREEN CHEMISTRY PRINCIPLES: A COMPREHENSIVE REVIEW OF MICROWAVE IRRADIATION, SONOCHEMICAL, AND CONTINUOUS FLOW METHODOLOGIES
Abstract: Membrane-based separation technologies have emerged as indispensable tools in water purification, biomedical engineering, pharmaceutical processing, and environmental protection. However, conventional membrane fabrication processes often rely on hazardous organic solvents, energy– intensive steps, and environmentally taxing conditions. In response to increasing global emphasis on sustainability and regulatory pressures, green chemistry strategies have gained attention for enabling safer, energy-efficient, and eco-friendly membrane production. This review provides a comprehensive and structured analysis of …
Published in International Journal of Membranes · Vol. 3, Issue 1, 2026 · pp. 8–24 Read article
-
Virtual Fabrication and Analog Performance of Sub-40nm Bulk MOSFET
Abstract: Virtual Fabrication of sub-40nm Bulk MOSFET is carried out under channel engineering and source drain engineering process. These structures enable more aggressive device scaling in nano-scale region because of their ability to control short channel effects. How ever during scaling the junction depth should also be scaled down, which increases parasitic resistance so silicidation technique has been applied to reduce their effects on device. Analog performance has been measured in …
Published in Journal of Electronic Design Technology · Vol. 1, Issue 1-3, 2011 · pp. 34–40 Read article
-
Design and Fabrication of Portable Two Wheeler Washing Plant
Abstract: AbstractThe design objective is to come up with an automatic two wheeler washing system automatically using Arduino Uno. This project aims at cleansing the front, top and rear surfaces of the vehicle properly. A vertical moveable frame is suspended with 15 to 18 nozzles coupled to it. Nearly about 12 to 15 nozzles are used to eject water from the water tank on the vehicle and 5-6 nozzles are used …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 2, 2020 · pp. 9–12 Read article
-
Short Report on Surface-Driven Capillary Flow of Dyed Water in Straight Microchannel Fabricated by Polymer
Abstract: In this experimental work, a single straight microchannel of rectangular cross-section is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. This microchannel is fabricated using polymethylmethacrylate (PMMA) as optically transparent polymer. Dyed water is selected and prepared as working liquid. CMOS camera is used to record the surface-driven capillary flow of dyed water in the fabricated straight microchannel. This work will be useful in applied chemistry.
Published in Journal of Semiconductor Devices and Circuits · Vol. 7, Issue 3, 2020 · pp. 11–13 Read article
-
Recording on Passive Capillary Flow of Dyed Working Liquids in the Polymer based Microfluidic Devices Fabricated inside the Cleanroom Laboratory
Abstract: In this experimental work, author has fabricated total 13 individual microfluidic devices using the maskless lithography, hot embossing lithography, direct bonding technique, diamond like carbon (DLC) coating, and laboratory-made clamping inside the cleanroom laboratory using author’s own hands-on completely. Polymethylmethacrylate (PMMA) is the chosen polymer to fabricate the 10 individual microfluidic devices due to its plasticity and optical transparency. Dyed water, dyed ethylene glycol and dyed ethanol are the prepared …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 35–44 Read article
-
Layout Design, Fabrication and Characterization of n-Channel MOSFET
Abstract: Primary force behind evolution of semiconductor industry is MOSFET, after its first IC based experimental demonstration in 1960s. It is fundamental working unit of most of the electronic circuits like cells in living being. Number of devices on a single chip has been increased with rapid phase with evolution of new technology of materials. Today there are more than 4 billion transistors are there on a single chip with effective …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 2, 2016 · pp. 13–18 Read article
-
Short Review on the Materials for Microfluidics with the Experiments to Record the Surface-Driven Capillary Flow of Dyed Water in Fabricated Microfluidic Device for Bioengineering Applications
Abstract: In this review, dominant features of suitable materials for the fabrication of microfluidic devices are briefly mentioned. Surface modification techniques are useful to vary the flow-speed in microfluidic devices. Surface modification techniques are dependent on the choice of device materials. In this present paper, a single polymeric microfluidic device as sudden expansion microchannel is fabricated by author using maskless lithography, hot embossing lithography and direct bonding technique. Also, the surface-driven …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 3, 2020 · pp. 1–4 Read article
-
Short Report on Surface-driven Microfluidic Flow of Dyed Ethanol in Microchannel Bend Fabricated by Optically Transparent Polymer in Cleanroom Environment
Abstract: In this experimental work, a single microchannel bend is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. Polymethylmethacrylate (PMMA) is the chosen optically transparent polymeric material to fabricate the microchannel bend inside the cleanroom laboratory. Dyed ethanol is prepared as working liquid. CMOS camera is used to record the surface-driven capillary flow of dyed ethanol in the fabricated microchannel bend. Effect of centrifugal force on surface-driven capillary …
Published in Trends in Opto-electro & Optical Communication · Vol. 10, Issue 3, 2020 · pp. 1–4 Read article
-
Fabrication and drilling characterization of Hemp & Grewia-Optiva hybrid composite and comparison with ANN model
Abstract: In recent days the use of natural fibers has increased over synthetic fibers due to various advantages. The alkali treatment for these natural fibers further improves the adhesion between fiber and matrix and greatly enhances the mechanical properties of the composite. The present study involves the fabrication of a hybrid composite using the alkali-treated (5% NaOH concentration) natural fibers – Hemp &Grewia-optiva as reinforcement material and epoxy as a matrix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 138–146 Read article
-
Fabrication of Belt for Backpack for Students to Reduce the Musculoskeletal Disorders using ABS material 3D Printing
Abstract: In the present study, the design and development of a composite-based belt aim to reduce the excessive burden on the backs of schoolchildren, which often leads to musculoskeletal disorders (MSD). The belt is designed using CATIA 3D modeling software and fabricated on an FDM-based 3D printer with ABS polymer. The design process focuses on addressing physical stress caused by heavy backpacks and prolonged use of electronic devices, both of which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1110–1117 Read article
-
Fabrics and medical devices (catheters) coated with Zn doped CuO nanoparticles kills micro-oganisms and provide healthy environment
Abstract: These days, drug resistance by microorganisms is a major challenge in the field of medicinal chemistry. Most of the familiar antibiotics turnout to be of no impact in curbing the proliferation of microorganism (bacteria, virus and fungus). To address the issue of multi-drug resistance (MDR) and extremely drug resistance (EDR) in microorganisms that cause various health complications, like the dental decay, biofilm formation, foul smell, delayed wound healing, aggravation of …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 1, 2025 · pp. 1–9 Read article
-
Thin Film Solar Cells: Progress in Materials, Fabrication, and Efficiency Enhancements
Abstract: Thin film solar cells (TFSCs) have drawn a lot of interest because of their potential for efficient and reasonably priced photovoltaic energy conversion. Their flexibility, low weight, and lower material consumption make them a desirable substitute for conventional solar cells made of crystalline silicon. This review explores recent advancements in TFSC technology, with a focus on materials, fabrication techniques, and efficiency improvements.Various thin-film materials, such as amorphous silicon (a-Si), perovskite, …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 37–42 Read article
-
Design and Fabrication of a 3D-Printed Femur Model: Insights into Mechanical Properties and Implant Research
Abstract: This study is an attempt to analyse the 3D printing of the female femur model of the central India region and provides ample suggestions for bone implant research. This article discusses the design development and experimental validation of finite element analysis (FEA) results with the 3D-printed bone model. Using CT scan data, the FE analysis is executed on a real femur bone of a 25-year-old female of 52 kg weight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 329–338 Read article
-
Extraction, Stability, and Application of Natural Dye from Spathodea campanulata Flower: A Study on Shelf Life, Yield, and Fabric Dyeing Potential
Abstract: The growing demand for sustainable and eco-friendly alternatives to synthetic dyes has led to increased interest in natural dye sources. Spathodea campanulata, commonly known as the African Tulip Tree, is a potential source of natural dye due to its vibrant floral pigments. This study focuses on the extraction, yield, stability, and application of the dye obtained from Spathodea campanulata flowers. The dye was extracted using an aqueous method, and its …
Published in Research & Reviews : Journal of Botany · Vol. 14, Issue 3, 2025 · pp. 8–15 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article