Search
160 articles for “SEM and EDS.”
-
Preparation of Phase – Pure Nanocrystalline Anatase and Rutile TiO2 using Hydrolysis of TiCl4 in presence of surfactants
Abstract: Hydrolysis of TiCl4 was carried out in two different ways to prepare nano crystalline TiO2. In the first method the hydrolysis of TiCl4 was carried under high acidic conditions at low temperature. In the second method hydrolysis was carried out using (NH4)2SO4 as an additive. It can be seen that the hydrolysis of TiCl4 under high acidic conditions promotes the growth of rutile phase of TiO2, where as hydrolysis in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 31–40 Read article
-
Effect of Curing Time on Physico-mechanical Properties on Dental Composite
Abstract: This study aim to investigate the influence of curing time on physical and mechanical properties of a dental composite cured by using LED light with intensity of 1500 mW/cm2 in the range of 440-480 nm. We prepared the glass ionomer powder by fusion of various inorganic components at high temperature and studied the influence of silica/alumina ratio keeping other inorganic salts such as Calcium fluoride (CaF2), Sodium Fluoride (NaF), Calcium …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 36–47 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article
-
Implementation of a 4-Bit Synchronous Counter in SkyWater 130 nm CMOS Technology Using Open-Source EDA Tools
Abstract: As semiconductor technology continues to scale down, the physical layout of integrated circuits has become increasingly critical in determining performance, power consumption, and area efficiency. This paper presents the complete physical design implementation of a 4-bit counter, from Register Transfer Level (RTL) to GDSII, using the SkyWater 130 nm open-source Process Design Kit (PDK) and the OpenLane automated physical design flow. Functional verification of the RTL design was initially performed …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 4, Issue 2, 2026 Read article
-
BER Analysis in Optical Fiber Communication System using Different Optical Amplifiers
Abstract: AbstractThis paper describes the simulation study of losses that occurs in the optical fiber communication system with and without optical amplifiers. The analysis is done in the OPTISYSTEM 16.0 software on the basis of Q-factor, BER and eye height for different optical amplifiers which are Erbium Doped Fiber Amplifier (EDFA) and Semiconductor Optical Amplifier (SOA)Keywords: BER, eye diagram, Q-factor, eye height, SOA, EDFA, OPTISYSTEM 16.0Cite this ArticleArpitha G.A. BER Analysis …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 33–42 Read article
-
Reasons For Not Studying in The Young Generation and Its Solutions
Abstract: Two decades ago, the education process in Afghanistan was promoted more than before, the level of literacy increased, many public and private schools, universities, and other semi-higher education institutions were established, numbers of printing houses and publications were created, and many magazines and other types of books were printed every month. The culture of learning and studying was moving forward rapidly. Unfortunately, in the last decade, the learning and studying …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 14, Issue 2, 2024 · pp. 34–41 Read article
-
Optical and Photocatalytic Activity Of Cmc Capped Zinc Selenide Nanoparticles Under UV Light Irradiation Using Congo Red Dye
Abstract: In this work, we report the, optical, structural morphology and photocatalytic activity of CMC capped zinc selenide nanoparticles, which have been synthesized by hydrothermal method. CMC is acted as capping agent. The nanoparticles were characterized using XRD, SEM with EDAX, AFM, TEM and UV-Vis absorption spectroscopy. The structural properties of nanoparticles have been characterized by X-ray diffraction (XRD) analysis. The XRD patterns show a hexagonal Wurtzite crystal structure. The surface …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 3, 2019 · pp. 25–35 Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
Green Synthesis and Functional Evaluation of Ag–Polypyrrole/TeO2 Nanocomposites for Advanced Electronic Applications
Abstract: Ag–PPy/TeO₂ nanocomposites with TeO₂ loadings ranging from 2% to 10% were synthesized using an in-situ chemical polymerization method. Green tea extract, rich in phytochemicals, acted as both a reducing and stabilizing agent to facilitate the formation of metal oxide nanoparticles. The structural and morphological characteristics of the nanocomposites were analyzed using FTIR, PXRD, and SEM techniques. FTIR confirmed the successful integration of Ag, TeO₂, and PPy functional groups. PXRD patterns …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 64–76 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Silver Particles coating on polypropylene matrix for bacterial filter property
Abstract: Silver particles have a wide range of biomedical applications, including their use as drug. In this paper, we report on the synthesis of silver particles using crude aqueous extract of Manihot esculenta leaf extract. Two different (conventional stirring and ultrasonic) methods were employed in the reduction of AgNO3 process. Native extract as well Ag colloidal extract were checked cytotoxicity against Human Cervical Carcinoma cell. The anti cancer results achieved excellent …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 16–25 Read article
-
Comparative Analysis of Power Penalty versus Crosstalk in Optical Active Network Components like Erbium Doped Fiber Amplifier, Raman Amplifier and Semiconductor Optical Amplifier
Abstract: AbstractOptical amplifiers boost the power of optical system without optoelectronics (O-E-O) conversion. The optical amplification process is accompanied by Amplified Spontaneous Emission (ASE) noise that accumulates along the transmission line and degrades the optical signal to noise ratio (OSNR). Intensity modulation in one channel causes crosstalk in the other channel via the change of the complex refractive index in the amplifier. In this paper, authors tried to calculate and compare …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 1, 2013 · pp. 1–10 Read article
-
Biosynthesis of Zinc Oxide Nanoparticles and Their Revolutionary Impacts on Agroindustry: Review
Abstract: Nanotechnology is a new approach of science which provides alternative tool in many fields including agriculture. This comprehensive review focuses on the biosynthesis and characterization of zinc oxide nanoparticles (ZnO NPs), highlighting their vast potential in agroindustry applications. Unlike traditional physical and chemical methods, which are often costly, time-consuming, and involve hazardous materials, this review explores the promising biological synthesis routes, offering a more sustainable and eco-friendly alternative for producing …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 33–50 Read article
-
Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites
Abstract: The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 31–38 Read article
-
Chromatic Dispersion Compensation in Optical Fiber Communication System using FBG and EDFA
Abstract: AbstractNowadays optical communication is a most significant technique to transmit the data. In daily life we share our useful data by using optical network but dispersion is the main factor towards limiting the performance of optical system. However, the compensation of dispersion by Dispersion Compensating Fiber (DCF) and Fiber Bragg Grating (FBG) can boost significantly the system. This proposed work investigates and analyze the chromatic dispersion compensation in optical fiber …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
Synthesis and Characterization of In2S3 Nanoflake Thin Film for Photosensor Applications
Abstract: Indium sulphide (In2S3) thin films in the form of nanoflakes are synthesized by using chemical vapour deposition method on glass substrate with the intension to test its photosensor applications. These as deposited nanoflake thin films are characterized for physicochemical properties using X-ray diffraction (XRD) pattern, energy dispersive X-ray (EDAX) analysis,scanning electron microscopy (SEM) while optoelectronic properties were studied using optical and electrical characteristics obtained through UV-Vis transmission spectroscopy and I-V …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
Synthesis, characterizations, and challenges of magnetic Zn x Fe 2-x O 3 nanoparticles
Abstract: Diluted magnetic semiconductors comprising magnetic nanoparticles are a driving force in a variety of applications, including biomedicine, bioelectronics, photocatalytic activities, and nanosensors. However, the functionality of these nanomaterials can be influenced by several factors, such as synthesis route, characterization procedures, source, crystal size, and morphology. In this research, emphasis is devoted to synthesizing and characterizing magnetic nanoparticles. Most importantly, it is focused on biological methods, Co-precipitation methods, hydrothermal Gravity methods, …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 28, Issue 2, 2025 · pp. 1–16 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article