Search
648 articles for “characteristic analysis”
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article
-
Green Synthesis and Evaluation of Electronic and Optical Properties of CdS/CdTe Quantum Dots
Abstract: The CdS/CdTe quantum dots (QDs), with altered concentrations of CdS, were synthesized using straightforward precursors through an environmentally friendly green method. The synthesized quantum dots were characterization by UV–visible absorption spectroscopy, Photoluminescence (PL), and Fourier Transform Infrared Spectroscopy (FTIR) to understand their electronic and structural properties. The average particle size is nearly consistent with the values derived from Brus's formula. The UV–visible spectra show a blueshift compared with pure sample, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 185–194 Read article
-
Design and Analysis of Quantum Dot Solar Cell Using SCAPS-1D Software
Abstract: Compared to conventional solar cells, quantum dot solar cells (QDSCs) have drawn a lot of attention due to their hybrid structure, low production cost, and greater power conversion efficiency. Nevertheless, carrier recombination in the quasi-neutral region (QNR) continues to limit their performance. The electron transport layer (ETL) and hole transport layer (HTL) are two of the layers that are most important in determining the overall efficiency of the device. The …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 1, 2026 · pp. 15–20 Read article
-
High-Gain Microstrip Patch Antenna for Satellite and Radar Applications
Abstract: The growing demand for high-speed wireless communication, satellite connectivity, and advanced radar systems has increased the necessity for compact and high-performance antenna designs. This study presents the design and analysis of a high-gain microstrip patch antenna intended for satellite and radar applications operating in the microwave frequency range. The proposed antenna structure is developed using a low-loss dielectric substrate to enhance radiation efficiency, bandwidth, and gain characteristics while maintaining a …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Hydraulics of Flow Through and Over Fayoum Weir with Rectangular Bottom Openings
Abstract: Fayoum standard weirs have been modified by adding number of bottom openings to convey much water to downstream direction. This study aims to investigate the effects of using different configurations of Fayoum weirs with rectangular bottom openings on flow characteristics under different dimensions and number of openings. 46 weir configurations with height of 25 cm were used in this study, divided into four groups A, B, C and D. Each …
Published in Journal of Water Resource Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 17–25 Read article
-
Investigation on Direct Torque Control of BLDC Motor Using Various Controllers
Abstract: BLDC Stands for brushless DC Motor. Direct torque control is a type of a vector control. Direct Torque control consist of two control loops one is speed control and other one is torque control. For the purpose of speed control several speed controllers are used in this work such as PI, PID Controller and Fuzzy Controller. PID Controller was used for better speed response, no steady state error but due …
Published in Journal of Instrumentation Technology & Innovations · Vol. 11, Issue 2, 2021 · pp. 19–30 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 8–20 Read article
-
Utilization of Clay as Source Material in Geopolymer and Alkali Activated Concretes: A State of Art Review
Abstract: This innovative research looks at the use of clay as source material for geopolymer and alkali- activated concrete, with a focus on how they could promote green construction practices and perhaps replace Portland cement. Alkali-activated concretes and geopolymers offer low-carbon, eco-friendly alternatives by utilizing natural minerals and industrial wastes. Particularly clay is a plentiful and adaptable option for these cutting-edge products. This review looks at different kinds of clay, like …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 635–654 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Role of Reinforcement Learning in Improvement of Semiconductor Doping
Abstract: The semiconductor industry faces increasing challenges in achieving optimal doping profiles as device dimensions shrink and performance requirements intensify. Traditional doping optimization methods, while effective, often struggle with the complex, multi-dimensional parameter spaces characteristic of modern semiconductor manufacturing. This study explores the transformative role of reinforcement learning (RL) in improving semiconductor doping processes, examining how RL algorithms can autonomously optimize doping parameters to enhance device performance, reduce manufacturing costs, and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 2, 2025 · pp. 23–34 Read article
-
Deflection Analysis of the Leaf Spring Suspension System with the Combination of Helical Springs
Abstract: An efficient and optimized leaf spring suspension system for heavy vehicles must have low deflection but good damping capacity of absorbing shocks and jerks. In this research article, deflection analysis of a modified leaf spring suspension system with the combination of helical spring model is presented. To furnish this end, in the typical leaf spring suspension system model, a helical spring at each side of the master leaf is incorporated. …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 3, 2016 · pp. 21–30 Read article
-
Audiological Profiling in identical Twins with Auditory Neuropathy Spectrum Disorder: A Case Report
Abstract: Congenital or late-onset auditory neuropathy spectrum disorder (ANSD) is a severe form of sensorineural hearing loss primarily affects speech perception. However, there are various etiologies, including birth-related risk factors such as prematurity, hyperbilirubinemia, a genetic infant admitted to neonatal intensive care unit (NICU), anoxia, congenital anomalies, consanguinity, and other infections. A genetic predisposition is likely to be the underlying causative factor in about 40% of cases. It can be inherited …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 12, Issue 3, 2022 · pp. 25–29 Read article
-
Data-Driven Material Design and Performance Improvement: Constructing Sustainable Polymer Nanocomposites Using Deep Learning
Abstract: In the formation of sustainable polymer nanocomposites, the effective material techniques are required to balance the mechanical qualities, environmental compatibility and processing efficiency. The optimization of polymer matrix, nanofiller loading, processing conditions and material properties is typically time consuming, resource intensive and highly dependent on trial-error methodology using standard experimental techniques. The present work provides a data-driven approach that combines deep learning with sustainable polymer nanocomposite design for predicting and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Enhancing Credit Card Fraud Detection Using Device Fingerprinting and Behavioral Biometrics
Abstract: Credit card fraud is a growing global concern, with financial losses projected to reach $ 43.47 billion by 2028. Credit card fraud poses a major challenge in the financial industry, resulting in substantial financial losses and security risks. This research introduces a Machine Learning-based Credit Card Fraud Detection System designed to improve the accuracy of fraud identification. Due to the imbalanced nature of fraud datasets, SMOTE (Synthetic Minority Over-sampling Technique) …
Published in Journal Of Network security · Vol. 13, Issue 2, 2025 · pp. 40–50 Read article
-
Study on the Mechanical Properties of Additively Manufactured Metallic Structures
Abstract: A revolutionary technology that has made it possible to produce intricate metallic structures with customized mechanical properties is additive manufacturing, or AM. An extensive analysis of the mechanical properties of metallic components made using additive manufacturing processesis presented in this paper. The study explores how material choice, post-processing techniques, and process parameters affect the mechanical behavior of AM metallic structures. By examining tensile strength, fatigue characteristics, hardness, ductility, impact resistance, …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 3, 2023 · pp. 1–6 Read article
-
Geotechnical Analysis and Performance Evaluation of Subgrade Materials in Road Construction
Abstract: Geotechnical engineering plays a pivotal role in the design, construction, and long-term maintenance of infrastructure, particularly in road construction, where subgrade conditions are directly linked to pavement performance, durability, and overall structural integrity. The performance of a road is heavily influenced by the geotechnical properties of the subgrade, making it essential to thoroughly assess these properties in the planning and construction phases. This study comprehensively investigates the geotechnical characteristics and …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 24–29 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Experimental Investigations to Improve the Electrical Characteristics of Nitride-Based Nanoelectronic High Electron Mobility Transistors
Abstract: In this work, the DC and RF performances of conventional nanoelectronic high electron mobility transistor (HEMT) are compared with those of two individually modified HEMT structures in a nano-scale regime. All simulation results are produced by the SILVACO- ATLAS physical simulator according to the performed designs of HEMT structures. In each of these HEMT structures, the formation of quantum well is demonstrated at unbiased condition. In the DC analysis of …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 1, 2021 · pp. 14–30 Read article
-
A Critical Analysis of Research on Swallow-induced Respiratory Functions in Healthy Individuals as a Function of Head/Body Position
Abstract: Pulmonary functions and respiratory airflow are known to change with the body and head positions. The precise coordination of swallowing with regular respiratory patterns prevents lower airway infiltration during bolus passage. This review was conducted to analyze the influence of head and body positions on the respiratory measures surrounding a swallow in healthy individuals. An all-inclusive search run on the most popular health science databases retrieved 18,588 articles that were …
Published in Research and Reviews: A Journal of Medicine · Vol. 9, Issue 3, 2019 · pp. 20–28 Read article