Search
484 articles for “composite characterization”
-
In-Situ Polymerized GO/PANI Composites: Structural Evolution, Optical Modulation, and NH₃ Sensing at Room Temperature
Abstract: Graphene oxide (GO)/polyaniline (PANI) composites with varying PANI contents (20, 40, and 60 wt%) were synthesized via in-situ oxidative polymerization and systematically investigated for their structural, morphological, optical, and gas-sensing properties. X-ray diffraction (XRD) confirmed a progressive increase in interlayer spacing and partial exfoliation of GO layers with increasing PANI content, indicating intercalation-assisted hybridization. Fourier transform infrared (FTIR) spectroscopy revealed the characteristic vibrational bands of both constituents and confirmed strong …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Preparation of Methyl Esters of Solid Acids from Litsea Consimilis
Abstract: This study focuses on the extraction and characterization of fatty acids from the seed oil of Litsea consimilis and their subsequent conversion into methyl esters. The oil demonstrated high iodine and Reichert-Meissl values, indicating a significant content of unsaturated and short-chain fatty acids. Glyceride analysis revealed that trilaurin constitutes over 90% of the triglycerides, confirmed through melting point analysis and hydrolysis yielding lauric acid as the sole component. The oil …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 129–134 Read article
-
Current-Voltage Characteristics of 15-Atom Agnrs and Zcnts at Various Bias Voltages: Insights for Polymer Nanocomposite Applications
Abstract: The present research investigates the electronic properties of 15-atom Armchair Graphene Nanoribbons (AGNRs) and 15-atom Zig-Zag Carbon Nanotubes (ZCNTs) under applied bias voltages of 100, 200, 300, 400, 500, and 600 millivolts. Using the Non-Equilibrium Green's Function (NEGF) technique, the study analyzes various electrical features, including current-voltage (I-V) characteristics, to understand the behavior of these nanostructures. The findings reveal that AGNRs exhibit a larger bandgap than ZCNTs, which have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 135–144 Read article
-
Investigation on mechanical performance of 3D printed PLA-Kraft Lignin composites
Abstract: Bio-based polymer composites are becoming more popular due to the growing need for sustainable and biodegradable materials in additive manufacturing. PLA-kraft lignin composites were created and their mechanical performance in fused deposition modeling (FDM) applications was assessed in this work. Polylactic acid (PLA) was mixed with Kraft lignin, a sustainable by-product of the paper industry, at weight percentages of 0%, 1%, 3%, 5%, and 7%. Melt blending was utilized to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1002–1015 Read article
-
Mechanical and Sustainable Enhancement of Epoxy Composites using Tamarind Seed Powder
Abstract: The investigation examines how tamarind seed powder affects epoxy-based materials for the development of waste-based useful products. The research examines the mechanical behavior of epoxy resin composites which contain tamarind seed powder in increasing percentages spanning from 10% to 40%. The team utilized the hand layup method to produce the composites which then fulfilled the ASTM guidelines for specimen fabrication for mechanical tests. The study examined fundamental mechanical parameters by …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 797–806 Read article
-
Enhancing Fiber Digestibility in Dairy Cows: Influence of Dietary, Management, and Environmental Factors
Abstract: The digestibility of fiber in dairy cows is a critical factor for optimizing their nutritional efficiency and overall productivity. This study explores the key dietary, management, and environmental factors influencing fiber digestibility in the rumen. Various aspects of feed composition, such as fiber content, protein-to-fiber ratio, and the presence of anti-nutritional factors, play a significant role in determining microbial activity and rumen fermentation efficiency. Physical feed characteristics, including particle size, …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 16, Issue 2, 2026 Read article
-
Role of Polymer and Composite Materials in Enhancing Durability and Comfort of Urban Park Furniture for Senior Citizens
Abstract: Parks in urban areas are crucial in facilitating physical activities, socialization, and or mental health to the elderly citizens. Nonetheless, the traditional materials in outdoor park furniture may suffer in the form of low durability, weathering, ergonomics and maintenance, among other aspects and restrict long term applications of such furniture by the elderly population. The research question examined in the proposed study is: How can polymer-based and composite materials improve …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 297–311 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Self-Healing Polymeric Composites Reinforced with Green Synthesized Nanoparticles
Abstract: The development of sustainable self-healing polymeric materials is critical for enhancing durability and service life in advanced engineering applications. In this study, zinc oxide (ZnO), magnesium oxide (MgO), and ferric oxide (Fe₂O₃) nanoparticles were green-synthesized using Allium cepa extract and incorporated into epoxy-based polymeric composites to improve mechanical, thermal, and self-healing properties. This bio-based synthesis is eco-friendly and safe alternative to harsh chemical techniques, utilizing natural antioxidants to stabilize the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 305–314 Read article
-
Corn Husk Fiber–Reinforced PLA Biocomposites: Mechanical, Thermal, and Biodegradation Performance
Abstract: The increasing environmental burden caused by conventional petroleum-based plastics has driven significant interest in the development of sustainable polymer composites reinforced with renewable natural fibers. In the present work, corn husk fiber (CHF), an agricultural waste by-product, was utilized as a reinforcing phase in a polylactic acid (PLA) matrix to fabricate eco-friendly biocomposites. Composite samples with varying fiber loadings (0–40 wt.%) were produced through twin-screw melt blending followed by compression …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 312–327 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
Isolation and Characterization of Glucuronide Compound from Luffa Tuberosa (Roxb.) for Potential Applications in Polymer Chemistry
Abstract: This study explores the isolation process of glucuronide compounds from Luffa tuberosa (Roxb.) using an efficient and cost-effective method. The extracted compound, Gypsogenin-3β-O-β-D-Methyl glucuronide, is characterized using spectroscopic techniques such as IR, NMR, and Mass Spectrometry. The polymeric nature of glucuronide-based compounds and their potential applications in polymer and composite materials are discussed. The findings highlight the suitability of glucuronide derivatives in biomedical, pharmaceutical, and polymeric drug delivery systems. Additionally, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 566–572 Read article
-
A Review of Modifications of Cement Slurry Formulations for Carbon Dioxide Storage
Abstract: Climate action, which includes activities aimed at mitigating climate change or reducing its adverse impacts, is the thirteenth goal of the 2030 SDGs (Sustainable Development Goals). Tthe successful commercial deployment of CCS technology would heavily rely on the integrity of the cement sheath used to complete the wellbores at the CO₂ storage sites. It has been established that the cement sheath made from conventional ordinary Portland cement (OPC) is not …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 1–21 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Advancements in graphene reinforced metal matrix composites: A comprehensive review
Abstract: The Present pollution norms insist automobile manufacturers to make use of ultra-high specific strength materials i.e., materials ahead of conventional metal matrix composites (MMCs) with micro-sized reinforcements. With the advent of nanomaterials, nanocomposites are being developed with properties that overcome the limitations for metals or composites with micro-sized reinforcements. In recent years, the family of graphene-based materials, in particular, graphene nanoplatelets (GNPs) reinforced MMCs offering promising solutions to revolutionize the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 177–189 Read article
-
A Review on Effects of Waste Tire Rubber Polymer on Fresh, Mechanical, and Impact Resistance Properties of Rubberized Concrete
Abstract: According to the collective findings of numerous researchers, waste tire rubber has proven to be a valuable addition to concrete, contributing to advancements in construction. Rubber crumb is artificial rubber polymers, such as butadiene rubber (BR). The chemical composition of tire rubber crumb that is discarded can be represented by the combination of (C5H8)n, (C8H8)x-(C4H6)y, (C4H6)n, C, S8, ZnO, and complicated hydrocarbons. Various studies have explored the mechanical and impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 469–478 Read article
-
Exploring the Bioactive Potential of Himalayan Lichens: Phytochemical and Antimicrobial Profiling of Xanthoparmelia tinctina and Pyxine subcinerea Extracts
Abstract: The symbiotic association that develops between cyanobacteria, algae, and fungi results in the composite organism known as lichens, which has traits similar to those of plants but differs in its separate parent organisms. Lichens can have a variety of morphological characteristics, including foliose structures that resemble flat leaves, crustose structures that resemble flake crystals, fruticose branches that have short, leafless branches, and leprose-powder-like appearances. Due to their therapeutic potential, lichens …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 2, 2024 · pp. 21–28 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article