Search
1969 articles for “3-S” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Research Paper On Design Modification Of Dipper Stick Of Jcb 3DX Model
Abstract: JCB’s excavators does various earth moving activities. Practically earth moving activity in them is made by backhoe assembly. In this assembly, the dipper stick is the part which connects the boom with the bucket. The stick provides the digging movement needed to pull the bucket through the ground. There are some problems like dipper stick can’t getting closer to the machine when they’re trenching, questions on their structural rigidity as …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 38–43 Read article
-
Finite Element Modeling of Asphalt Concrete Pavement Reinforced with Geogrid by Using 3-D PLAXIS Software
Abstract: This paper presents an axisymmetric finite element (FE) model to analyze the behavior of unreinforced and geogrid reinforced asphalt concrete pavement subjected to various tire pressures. The model was loaded with an incremental loading from 100 to 600 kPa with 50 kPa increment and the critical pavement responses such as total stress and vertical surface deflection were determined for unreinforced and geogrid reinforced flexible pavement. The results indicated that during …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 12–20 Read article
-
A brief review on Influenza A virus (H 3 N 2 ) and its effects in human with precondition
Abstract: A primary cause of human influenza is the viral genus Influenzavirus A, of which H3N2 is a subtype. The virus has undergone various mutations, resulting in the emergence of different strains, affecting pigs, humans, and birds. H3N2 exchanges internal protein-coding genes with other influenza subtypes through reassortment. The H3N2 virus, which is a type of seasonal influenza A virus, is still circulating globally and is causing symptoms very similar to …
Published in Research and Reviews: A Journal of Microbiology and Virology · Vol. 13, Issue 1, 2023 · pp. 13–17 Read article
-
Implementation of 32 bit parallel adder using XILINX IPCORES A Case Study
Abstract: The paper aims to target the Xilinx intellectual property (IP) cores and the methodology that allows in the easy way of implementing the IP cores and its functionalities and the interface with the recent Xilinx FPGA’s. The proposed work compares the results obtained with the conventional Xilinx programming and the IP cores which are associated with it. VHDL programming style is used to describe the hardware and its functionality. Keywords: …
Published in Journal of VLSI Design Tools and Technology · Vol. 10, Issue 2, 2020 · pp. 8–16 Read article
-
Automate Voice Controlled Robot Using Raspberry Pi 3b+
Abstract: As, robotics and artificial intelligence (AI) is a subfield of engineering dedicated to research and development. There are a lot of researchers working on to enhance the connection between robots and humans through AI. The proposed system presents the research of the designing and development of a voice controlled talking robot using AI and IOT device. The proposed system is based on microcontroller Raspberry Pi. The client will utilize an …
Published in Journal of Advancements in Robotics · Vol. 8, Issue 1, 2021 · pp. 14–20 Read article
-
Multi-Modal (Hybrid) More Efficient and Highly Secured Enhanced Hand Geometry Authentication using 3 Steps Authentication by Means of Biometrics, Steganography and Encryption
Abstract: “Biometrics” is the science, which is used to verify the identity of the persons through either behavioral traits or physical characteristics. This area has gained great importance in maintaining the security of the places that require high security accuracy. Hand geometry is considered one of the biometrics, which derived its reputation from the ease of use and the acceptance of many people to use it. Hand geometry based biometric systems …
Published in Journal of Image Processing & Pattern Recognition Progress · Vol. 1, Issue 2, 2014 · pp. 22–33 Read article
-
Origin of Modern Mathematical Numeral – 0, 1, 2, 3, 4, 5, 6, 7, 8, 9: the Hindu-Indian-Brahmagubta, The Islamo-Arabic or the West?
Abstract: The aim of this paper is to examine, analyze and ascertain the root of the modern mathematical numeral system between the Indian-Hindu Brahmagubta, Islamo-Arabic and the Western numeral systems. The paper utilized secondary source of data. The methodology adopted by the paper is content analysis. The findings of the paper revealed that the origin of the shapes of our ten modern numerals do not concern the Indian mathematics history, as …
Published in Research & Reviews: Discrete Mathematical Structures · Vol. 1, Issue 2, 2014 · pp. 36–55 Read article
-
Thermal Analysis of CaZrO3 Coated Diesel Engine Liner Using 3-D Finite Element Method
Abstract: Abstract Results, obtained from many research papers it has been observed that in internal combustion engine about one third of total fuel energy is converted into useful work, about one third of the total fuel energy goes with exhaust gases and about one third of total fuel energy transfer to the coolant in form of heat through the cylinder wall, piston, valve etc. According to second law of thermodynamics, exhaust …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 3, 2014 · pp. 26–32 Read article
-
3D Finite Element Analysis of Marine Risers under Random Loads
Abstract: The dynamic response of marine risers under long crested random sea is obtained in time domain using finite element solver ABAQUS/AQUA. The response analysis is based on a simulation technique which duly considers various nonlinear effects such as relative velocity squared drag force, variable added mass due to variable submergence and nonlinearity due to large excursions. It also accounts for variable tension in the riser due to variable submergence, variable …
Published in Journal of Offshore Structure and Technology · Vol. 1, Issue 1, 2014 · pp. 46–52 Read article
-
Report on the Effects of Mole Fraction, Doping Concentration, Gate Length and Nano-Layer Thickness to Control the Device Engineering in the Nanoelectronic AlGaN/GaN HEMTs at 300 K to Enhance the Reputation of the NIT Arunachal Pradesh
Abstract: In this work, we report total 20748 individual simulation-outputs according to the performed simulation-studies on the Nanoelectronic AlGaN/GaN high electron mobility transistors (HEMTs). This series of simulation work has been performed using the SILVACO-ATLAS software tool. In this work, the drain characteristics is investigated with respect to the Aluminium mole fraction, doping concentration, drain voltage, gate voltage, gate length and thickness of the AlGaN nano-layer. The investigation on the effect …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 1, 2017 · pp. 15–47 Read article
-
Remapping of ECU Engine (KTM 390)
Abstract: Modern engines in automobile industry are controlled digitally with the help of engine management unit (EMU) which is programmed with the help of engine dyno manually to get the desired power, efficiency. Emissions Engine map of a four cylinder engine is tuned with the help of algorithm by using engine dynamometer as well as EMU, engine speed and throttle position is obtained by algorithm of air fuel ratio to obtain …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 7, Issue 2, 2020 · pp. 26–28 Read article
-
In silico 3D Structure Modeling and Analysis of Galactoside 2-alpha-L-fucosyltransferase 1
Abstract: A rare group of blood known as Bombay blood group was discovered in Mumbai formerly known as Bombay more than five decades ago, which lacks A, B, AB and O type. A theoretical model of human Galactoside 2-alpha-L-fucosyltransferase 1/FUT gene is predicted. The model was generated by application of homology modeling and structure prediction approaches. As the template homology to the query sequence is too low a multiple online modeling …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 1, Issue 3, 2014 · pp. 1–11 Read article
-
Insilico 3D Structure Modeling and Docking to Find Potent Inhibitors for Thrombocytopenia
Abstract: Lots of people are getting affected by various kinds of auto-immune disease in their day to day life and thrombocytopenia is one of them, which occurs due to lack of thrombocytes or platelets. Various kinds of vaccines, drugs are used to stop the disease, but the effect varies from person to person depending upon the immune system. In thrombocytopenia disease the integrin beta protein of human affects the person’s own …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 1, Issue 3, 2014 · pp. 31–40 Read article
-
Antifungal Susceptibility Pattern of Candida Species Isolates from Dehradun City Hospitals
Abstract: The present investigation on the topic entitled “Antifungal susceptibility analysis of Candida species isolates from Dehradun City hospital.” was accomplished in the Doon University Microbiology laboratory (P.G.) and Hospital, Dehradun, Uttarakhand, during the period of February 2021 to July 2021. A total of 42 clinical samples were collected from patients, suspected of candidiasis from Dehradun city hospitals. Clinical samples were collected from oral cavity, blood, vaginal fluid and urine of …
Published in Research and Reviews : A Journal of Immunology · Vol. 14, Issue 1, 2024 · pp. 12–29 Read article
-
Computer-aided Drug Design Method for Anti-hepatitis C Drug Design
Abstract: Hepatitis C is a disease caused by the hepatitis C virus and can cause serious liver damage. There is currently no vaccine for this disease and the number of infections continues to increase worldwide. Currently used antiviral drugs are interferon alfa-2a and ribavirin, but about half of patients do not respond to therapy. Therefore, new drugs that protect against hepatitis C need to be investigated. Computational drug methods have been …
Published in Research and Reviews : A Journal of Immunology · Vol. 14, Issue 2, 2024 · pp. 1–8 Read article
-
Solid acidity of MoO3 synthesized by solution combustion method and acetalization of formaldehyde using it
Abstract: MoO 3 nanoparticles were synthesized via solution combustion approach. Ammonium nitrate was used as oxidant and ammonium molybdate as fuel in combustion reaction. XRD, FTIR and Raman spectroscopy results showed that MoO 3 nanoparticles were successfully synthesized by the solution combustion reaction. The SEM analysis showed that synthesized MoO 3 nanoparticles have rod-like shape with width and thickness of 50-200nm and length of 0.2-1μm, respectively. The XRD pattern and morphology …
Published in Journal of Catalyst & Catalysis · Vol. 12, Issue 3, 2025 · pp. 01–09 Read article
-
Efficacy of New Fungicides in Controlling Powdery Mildew of Sweet Gourd
Abstract: This experiment was conducted at the Plant Pathology Division, Regional Agricultural Research Station (RARS), Jamalpur, Bangladesh during 2025 of Rabi & Kharif-1 seasons to find out the effectiveness of new fungicides against Powdery mildew disease of sweet gourd. Twenty (20) new fungicides viz. Acrozet 50 WP, Qingdao GBW, Hea 10 FC, Top star 32.5 SC, Nila 80 WP, Soazeb 72 WP, Safezeb 80 WP, Canvas 32.5 SC, Pyzim 50 WP, …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 14, Issue 3, 2025 · pp. 134–142 Read article
-
Comparative Analysis of the Structural Integrity and Dimensional Stability of Additively Manufactured Biopolymers vs. Thermoformed PETG: A 1-Year Retrospective Study on Polymer Performance in Orthodontic Applications
Abstract: Objective: This study aimed to evaluate the long-term dimensional accuracy and structural performance of direct 3D-printed biopolymers compared to conventional vacuum-formed Polyethylene Terephthalate Glycol (PETG) composites. The investigation focused on how different polymer processing methods (additive manufacturing vs. thermoforming) influence material thinning and resistance to occlusal stress. Methods: A retrospective analysis was conducted on 60 cases (n = 60) of post-orthodontic maintenance. The sample was divided into two cohorts: Group …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 140–146 Read article
-
Antifungal Susceptibility Pattern of Candida Species Isolates from Dehradun City Hospitals
Abstract: The present investigation on the topic entitled “Antifungal susceptibility analysis of Candida species isolates from Dehradun City hospital.” was accomplished in the Doon University Microbiology laboratory (P.G.) and Hospital, Dehradun, Uttarakhand, during the period of February 2021 to July 2021. A total of 42 clinical samples were collected from patients, suspected of candidiasis from Dehradun city hospitals. Clinical samples were collected from oral cavity, blood, vaginal fluid and urine of …
Published in Research and Reviews : A Journal of Immunology · Vol. 12, Issue 2, 2022 · pp. 12–28 Read article
-
LITERATURE REVIEW OF THREE-DIMENSIONAL PRINTING METHODS IN MEDICAL DEVICE FABRICATION
Abstract: The idea of personalized medicine has been around for a while, but it has recently gained a lot of attention. 3D printing technology is attracting interest because of its practical uses in the pharmaceutical industry and other areas of healthcare. This study discusses the framework of medication delivery technology using 3D printing and its role in developing pharmaceutical products. 3D printers can be classified as inkjet, extrusion, or laser-based devices, …
Published in Emerging Trends in Personalized Medicines · Vol. 3, Issue 2, 2026 Read article