Search
318 articles for “absorption”
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Influence of SlS Parameters on Strength and Fatigue Durability of Polyamide-12
Abstract: Selective Laser Sintering (SLS), a laser-based polymer powder bed fusion process, has gained prominence in the fabrication of high-performance thermoplastics such as Polyamide-12 (PA12). This paper provides an extensive review of how key SLS process parameters—such as laser power, scan speed, hatch spacing, and energy density—affect the mechanical properties of PA12 components, with a specific focus on tensile strength and fatigue resistance. Studies demonstrate that increasing energy input enhances particle …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 178–191 Read article
-
High-Velocity Impact Response of CFRP and Hybrid Composites: A Comprehensive Review on Ballistic Resistance and Damage Mechanisms
Abstract: This review consolidates recent advances in the study of high-velocity impact response of carbon fiber reinforced polymer and hybrid composites. Carbon fiber reinforced polymer composites are widely applied in aerospace, automotive, and defense due to their high strength-to-weight ratio, stiffness, and durability. However, their susceptibility to impact damage such as delamination, matrix cracking, and fiber breakage limits their performance under dynamic loading. To overcome these challenges, researchers have explored reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 100–122 Read article
-
Drug Resistance in Targeted Cancer Treatment: Clinical Difficulties, Molecular Mechanisms, and Emerging Strategies
Abstract: Targeted cancer therapy, which selectively inhibits the molecular mechanisms responsible for tumor growth and development, has revolutionized modern oncology. Targeted therapies have lower systemic toxicity and better therapeutic efficacy when compared to traditional chemotherapy. However, the emergence of medication resistance often limits the long-term efficacy of these treatments, ultimately resulting in treatment failure and disease progression. Drug resistance develops through a number of intricate biological processes and can be innate …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 17, Issue 1, 2026 · pp. 130–138 Read article
-
AI-Driven Topology Optimization of Woven Fiber-Reinforced Composite Chassis Structures for Electric Vehicles Under Crash Loading
Abstract: The structural design of an electric vehicle (EV) chassis represents a unique engineering challenge to achieve minimal weight while meeting occupants' safety requirements during high-energy crash conditions without compromise to the battery housing's integrity or the geometrical constraints of the electric powertrain package. In this paper, a single framework is proposed to integrate physics-based artificial intelligence (AI) surrogate models using PINNs, CNN-accelerated topology optimization, and FEA to design woven fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 72–89 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Bioenhancer to Boost Herbal Drug Efficacy
Abstract: Bioenhancers are natural substances that significantly improve the absorption, bioavailability, and therapeutic efficacy of drugs when co-administered, without showing notable pharmacological activity of their own. In herbal medicine, the concept of bioenhancement has received growing attention as many phytoconstituents exhibit low oral bioavailability due to poor solubility, limited permeability, and extensive first-pass metabolism. The traditional Ayurvedic system first introduced this concept through the discovery of Piperine, the active alkaloid from …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 2, 2026 Read article
-
Optimized Receivers for Underwater Visible Light Communication
Abstract: For uses like ocean exploration, environmental monitoring, and underwater data transfer, wireless communication under water is crucial. Conventional acoustic and radio frequency communication methods suffer from low bandwidth, high latency, and severe signal attenuation in underwater environments. With its high data rate and low propagation delay, Visible Light Communication (VLC) provides a promising alternative. In this work, an underwater VLC system is implemented using Light Emitting Diodes (LEDs) with intensity …
Published in Trends in Opto-electro & Optical Communication · Vol. 16, Issue 1, 2026 · pp. 22–33 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Thermoacoustic Properties of 1-Propanol-n-Hexane and 1-Propanol-Cyclohexane Binary Mixtures: A Comparative Study at 298.15 K
Abstract: This study reports the measurement of ultrasonic velocity (U), viscosity (η), and density (ρ) for the binary liquid mixtures 1-propanol–n-hexane and 1-propanol–cyclohexane at 298.15 K over the full composition range (mole fraction 0.1–0.9). From the experimentally measured data, several important thermodynamic and acoustic parameters, including isentropic compressibility (βₐ), acoustic impedance, intermolecular free length, free volume (Vf), and internal pressure (πᵢ), were systematically derived to assess the magnitude and nature of …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 19–30 Read article
-
Comparative Study of the Mechanical and Durability Performance of Interlocking Concrete Pavement Blocks
Abstract: Interlocking concrete pavement blocks (ICPBs) have emerged as a durable, modular, and sustainable alternative to traditional pavement systems. Their performance depends heavily on the mechanical characteristics of the concrete mix, block geometry, compaction technique, and curing conditions. This review compiles and analyzes research findings related to the strength, durability, structural behavior, and long-term performance of ICPBs produced using traditional and modified concrete mixes. Key parameters evaluated include compressive strength, split …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 24–30 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Study on Single-Slope Solar Still for Experimental and Data-Driven Analysis for Improving Productivity with Different Basin Materials.
Abstract: This study investigates the single-slope solar still under the diurnal variation of water temperature and distillate yield under identical operating conditions. Experimental analysis was conducted to evaluate the performance enhancement through the incorporation of natural basin materials, namely hemp and sand. The water distillation process is focused on improving potable water productivity and thermal behaviour. The inclusion of hemp and sand in the basin leads to noticeable differences in productivity …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 31–46 Read article
-
Photonic Diagnostics: Harnessing Optical Sensing for Non-Invasive Assessment of Coronary Obstruction
Abstract: Cardiovascular diseases (CVDs) remain the leading cause of mortality globally, with coronary artery blockages primarily atherosclerosis representing a critical challenge. The gold standard for diagnosing coronary artery disease remains invasive coronary angiography, a procedure that, while precise, carries inherent patient risks, high costs, and logistical burdens. Optical sensors, leveraging the principles of light-tissue interaction, offer real-time, high-resolution insights into vascular health, paving the way for early detection of arterial stenoses …
Published in International Journal of Optical Innovations & Research · Vol. 4, Issue 1, 2026 · pp. 25–30 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Noise and Vibration Reduction Using Sustainable Polymer Nanocomposite Materials: A Review
Abstract: Noise pollution and structural vibration represent critical challenges in modern engineering systems, affecting human health, operational efficiency, and equipment durability. This review examines the application of sustainable polymer nanocomposite materials for simultaneous noise and vibration reduction across diverse engineering domains. The fundamental relationship between structural vibration and noise generation is established, followed by a comprehensive analysis of sound absorption and damping mechanisms in nanoparticle-reinforced polymer systems. Multi-walled carbon nanotubes (MWCNTs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 785–798 Read article
-
Recent Development to Track Contraband using Muon
Abstract: The muon is one of nature’s fundamental particles discovered in 1937 by Carl Anderson. A muon is an elementary subatomic particle similar to electron, but with a mass approximately 207 times greater and, sometimes it is called as a “heavy electron”. Muons are generated naturally when cosmic rays collide with atoms in earth’s upper atmosphere and, then raining down all the times upon the surface of earth. Muons can be …
Published in International Journal of Universe · Vol. 2, Issue 1, 2026 · pp. 23–34 Read article