Search
22 articles for “Micro Mechanical milling”
-
Multi Objective Optimization in Micromilling of 304L steel by Taguchi-Grey-Fuzzy Method: Literature Review
Abstract: Micromechanical milling of 304L Stainless steel which is commonly used in the welded in severe corrosion environment and it terminates the need for annealing. The goal of this study is to investigate the influence of process input parameter such as cutting speed, depth of cut, feed per tooth, radial immersion percentage and plunging method on process output during circular pocketing operations. Tool wear, machining forces and surface roughness measurement are …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 25–30 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Preparation of Fe/Ti/Al Nano-particles and Mixed Nano-composites from Aluminium Industrial Wastes
Abstract: AbstractIndian alumina refineries produce over 6 million tonnes of alumina generating about 9 million tonnes of bauxite residue commonly (known as red mud) per annum, typically containing 50–60% Fe2O3, 15–20% Al2O3 and 3–5% SiO2, TiO2 and Na2O. Efforts have been made to synthesize nano-particles (Fe/Al/Ti) and nano-composites (Al-Fe-Ti/Al-Fe/Al-Ti) using red mud for chemical precipitation and mechanical milling. XRF was used to check the chemical composition of red mud processed at …
Published in Journal of Electronic Design Technology · Vol. 9, Issue 2, 2018 · pp. 24–29 Read article
-
Review of Research on Pozzolanic Materials for Cement Blending and Concrete Applications
Abstract: The growing environmental concerns associated with cement production, particularly its high carbon footprint, have driven research into sustainable alternatives such as supplementary cementitious materials (SCMs) derived from agricultural and industrial waste. This study synthesizes findings from recent investigations into the pozzolanic potential of basil plant ash (BPA), rice husk ash (RHA), and stockpiled fly ash (FA), evaluating their processing methods, microstructural characteristics, and performance in concrete applications. BPA, being derived …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Exploring the Impact of Micro plastics on Soil Ecosystems and Agricultural Productivity
Abstract: This research paper delves into the concerning issue of microplastic contamination in soil ecosystems and its potential consequences for agricultural productivity. Microplastics, defined as plastic particles smaller than 5 millimetres, have garnered significant attention for their adverse impacts on marine environments, yet their effects on soil ecosystems have been relatively overlooked. Through a review of existing literature and empirical analysis, this paper aims to elucidate the mechanisms by which microplastics …
Published in Research & Reviews : Journal of Agricultural Science and Technology · Vol. 14, Issue 3, 2025 · pp. 85–89 Read article
-
IoT-Enhanced Integrated LPG Level and Leakage Detection System
Abstract: Increased statistics of fire outbreak occurrences and gas leakage incidents in both industrial and domestic applications has called for better safety measures in Liquefied Petroleum Gas (LPG) management. Research efforts are therefore geared towards developing solutions which could greatly curb the menace of fire outbreaks and leakages of highly flammable gases. The presented work focuses on the design and fabrication of an IoT-enhanced system dedicated to the monitoring and detection …
Published in Recent Trends in Sensor Research & Technology · Vol. 10, Issue 2, 2023 · pp. 9–16 Read article
-
Advanced Liquid Crystal Polymer Substrate for Flexible Antenna Design
Abstract: A type of thermoplastic polymers known as liquid crystal polymers (LCPs) is frequently used to package millimeter (mm)-wave, microwave, and radio frequency (RF) integrated circuits that operate at frequencies as high as 60GHz. LCPs are of prospective relevance as packaging material for advanced circuits at mm-wave frequencies due to their appealing electrical, thermal, and mechanical qualities and comparatively low cost. Flexible and conformal antennas are made possible by LCP's exceptional …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 233–245 Read article
-
Plant-Derived Antimicrobials as Next-Generation Solutions to Multidrug Resistance
Abstract: The steady rise of multidrug-resistant (MDR) pathogens is reshaping how clinicians, researchers, and policymakers think about infection control. When bacteria acquire the ability to survive exposure to three or more antibiotic classes at once—whether through efflux pumps, enzyme-mediated drug destruction, target modifications, or reduced membrane permeability—treatment options narrow dramatically, hospital stays lengthen, and mortality climbs. Conventional pharmaceutical pipelines have struggled to keep pace with this biological arms race, pushing the …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 17, Issue 2, 2026 · pp. 27–40 Read article
-
Dual-Wavelength and Tunable Fiber Lasers for Microwave Photonic Applications
Abstract: Dual-wavelength and tunable fiber lasers have emerged as key enabling technologies for advanced microwave photonic (MWP) systems, offering high spectral purity, wide tunability, and enhanced stability. These laser sources play a critical role in generating and processing microwave and millimeter-wave signals through optical means, enabling low-loss transmission and immunity to electromagnetic interference. This review presents recent progress in the design and implementation of dual-wavelength and tunable fiber lasers, highlighting their …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 1, 2026 · pp. 17–25 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Comparative Investigation on Mechanical Properties of AMCs Fabricated through Liquid and Solid-State Fabrication Process
Abstract: This current research work is primarily focused on comparative experimental study on effect of two distinct fabrication process routes i.e. liquid state and solid state process and their corresponding parameters on microstructure and micro-hardness properties of Aluminium matrix composites (AMCs). In this work, AMCs were fabricated by reinforcing Al2O3 powder materials of 5, 10 and 15 wt.% into pure Aluminum (Al) matrix phase through two distinct processes; liquid state (stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–215 Read article
-
Nanocrystalline Silver: Synthesis by High-Energy Ball Milling, X-ray Debye Temperature Analysis, and Diverse Applications
Abstract: This research paper presents a comprehensive investigation into transforming micro-sized silver (Ag) powder into nanostructured Ag powder by applying high-energy ball milling. The ball milling process was executed over a total duration of 20 hours, with periodic sampling every 4 hours to monitor the evolving characteristics of the material. The particle size, lattice strain, Debye-Waller factor, and root mean square amplitudes of vibration were calculated by using X-ray powder diffraction …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 140–148 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article
-
Millet Bran: Unveiling Its Potential Health Benefits
Abstract: Millet bran, derived from various millet grains, has emerged as a potent nutritional source, rich in fiber, vitamins, minerals, antioxidants, and omega-3 and omega-6 fatty acids. Its rising popularity is driven by its gluten-free nature, nutrient density, and sustainability. This review aims to explore the potential health benefits of millet bran, focusing on its digestive health, blood sugar control, heart health, antioxidant properties, and fatty acid composition. The Millet brand …
Published in International Journal of Nutritions · Vol. 1, Issue 2, 2024 · pp. 11–19 Read article
-
Ce-TZP/Al2O3 Nanocomposites for Biomedical Implants
Abstract: Ceramic materials are widely used for biomedical applications because of their remarkable biological and mechanical properties. Titanium and titanium alloys are widely used for fabrication of dental implants. The foremost disadvantage of titanium is its dark greyish colour, negative delicate tissue states of the gingiva may prompt to compromised aesthetics. Anyway these days Zirconia implants were brought into dental implantology as an option in contrast to titanium implants. Zirconia seems …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 2, 2019 · pp. 1–6 Read article
-
Experimental Aspects of Surface-Driven Capillary Flow in Microfluidics
Abstract: AbstractAt least one of the length, width or height must be less than one millimetre in any microchannel. The fluidic motion in any microchannel is called the microfluidic flow. Surface-driven capillary flow is also called the passive capillary flow in microfluidics. Polymers are common materials to fabricate the microfluidic devices. In this work, different aspects of surface-driven capillary flow are briefly explained. Surface-driven capillary flow has many bioengineering applications that …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 1, 2020 · pp. 15–19 Read article
-
Experimental Study on Effect of Recycled Epoxy Powder Reinforcement on Tensile Behavior of Acrylonitrile Butadiene Styrene
Abstract: Thermosetting plastic found wider application in the field of Aerospace, Aircraft, Wind Turbines, Marine and construction due to their long life, light weight and high strength. Among thermosets, epoxy is the major contributor. The world epoxy resin usage is almost 3.6 million tons in the year 2022 and it may cross 5.91 million tons by 2029. At their end of life most of it goes to land filling which leads …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 306–315 Read article
-
Bedaquiline: An In-Depth Exploration into Its Antitubercular Significance
Abstract: Tuberculosis is still a leading infectious disease and a major threat to public health. Although there has been a slow decrease in the incidence over years, its “hard to kill nature” is responsible of about 2 million deaths in HIV infected individuals annually. Bedaquiline, a Diaryl-Quinoline drug was fast-track approved as an orphan drug to combat drug resistance. It shows potent activity against Mycobacterium tuberculosis by interfering with the production …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 12, Issue 2, 2025 · pp. 06–14 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Urinary Tract Infection (Tadiya-e-Majra-e-Baul) in Unani System of Medicine
Abstract: In classical Unani system of medicine Tadiya-E-Majra-e-Baul. (Urinary Tract Infection) comes under the heading of Hirqatul-baul (burning micturition) which is caused by obstruction in Urinary Tract due to stone, Jisme Gharib (foreign body) Ghaliz Ghost (Badgosh), Hamal (Pregnancy), and Characterized by frequency of micturition, urgency of micturition, burning micturition and anuria . It is an Unani Medicine of Shora Qalmi, Rewand Chini and Kababchini. Having safe and good result in …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 7, Issue 2, 2020 · pp. 34–39 Read article