Search
24 articles for “temperature susceptibility”
-
Assessing the Durability of Stone Matrix Asphalt Concrete
Abstract: Stone Mastic Asphalt (SMA) is widely used throughout the world as one of the preferred asphalt surfacings. The local specifications define asphalt concrete durability based on maximum loads at failure. Therefore, it is required to assess the durability of the road surface materials of SMA and their ability to resist operational effects in terms of environmental impact. In this investigation, the durability of stone matrix asphalt concrete was assessed in …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 1–8 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Design And Implementation of Anti-Interference Low Power Double-Edge Trigger Flip-Flop Based On C-Element
Abstract: Double-Edge Triggered Flip-Flops (DETFFs) will use a lot more power when there are glitches and interference in the signal input. This work proposes an anti-interference low-power DETFF based on C-elements to efficiently lower the power consumption. This DETFF employs an enhanced C-element, which successfully filters input signal glitches, avoids redundant transitions within the DETFF, and lowers the transistor's charge and discharge frequencies. To lower its latency, the C-element has additionally …
Published in Journal of VLSI Design Tools and Technology · Vol. 15, Issue 1, 2025 · pp. 36–44 Read article
-
Urban Planning Mitigation Trajectories for Urban Heat Island (UHI) A Case Study of Guntur, Andhra Pradesh, India
Abstract: AbstractGlobal radiation related solair-temperature directly influences Urban Heat Islands (UHI) as the built environments and surrounding atmosphere cause increase in urban solair temperatures, the resulting temperature completely depends on the thermal properties of the exposed materials. Urban heat islands can lead to deterioration of flora and fauna, elevation of ground level ozone, health disorders and increase in building energy consumptions. The study area of Guntur region which is susceptible to …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 2, 2018 · pp. 12–29 Read article
-
Silkworm Growth and Silk Yield under Changing Climatic Conditions: Challenges and Adaptations
Abstract: Climate change is emerging as a critical factor affecting agriculture and sericulture industries worldwide. Rising global temperatures, shifting rainfall patterns, and the growing frequency of extreme weather events present ever challenges to the growth and productivity of silkworms (Bombyx mori L.). Silkworms are extremely sensitive to environmental conditions like temperature, humidity, and photoperiod, all altered by climate change. Higher temperatures can accelerate silkworm metabolism, reduce silk yield, and increase susceptibility …
Published in International Journal of Insects · Vol. 1, Issue 2, 2024 · pp. 1–5 Read article
-
Thermo-Mechanical Vibration Analysis of Simply Supported Laminated and Flat Plates Under Harmonic Loading
Abstract: This paper delves into a numerical exploration of the vibration characteristics and frequency response of two types of plates: a simply supported rectangular laminated plate and a simply supported flat plate. These plates are subjected to concentrated harmonic forces within a thermal environment. The determination of the critical buckling temperature guides the assessment of thermal load effects. Analytical formulations, incorporating first-order shear deformation theory (FSDT) to consider shear deformation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1519–1530 Read article
-
The Impact of Climate Change on Animal Health and Veterinary Practices
Abstract: Climate change poses significant challenges to animal health, altering disease dynamics, impacting livestock productivity, and threatening wildlife populations. Rising global temperatures, changing precipitation patterns, and increased frequency of extreme weather events have direct and indirect effects on both domestic animals and wildlife. Heat stress in livestock, for instance, reduces productivity, fertility, and overall well-being. Water scarcity, malnutrition, and changing ecosystems also compromise the health of animals, making them more susceptible …
Published in Research and Reviews : Journal of Veterinary Science and Technology · Vol. 13, Issue 3, 2024 · pp. 26–30 Read article
-
The Onset of Rayleigh-Bénard-Marangoni Convection in a Ferromagnetic Fluid Layer
Abstract: This study examined the implications of magnetic boundary conditions, which are vertical in nature, on buoyancy and surface tension–driven ferrothermal convection (FTC) in a ferrofluid layer. While the upper surface is stress-free and susceptible to general thermal boundary issues, the bottom surface is stiff and insulating against temperature changes. The eigenvalue issue is solved analytically using the regular perturbation method and numerically using the Galerkin technique. According to analysis, raising …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 1–9 Read article
-
Understanding Food Spoilage: Mechanisms, Shelf-Life Determination, and Safety Standards
Abstract: Food spoilage poses significant challenges to the global food industry, impacting both food safety and economic sustainability. The main causes of food quality deterioration are microbial and non-microbial spoiling. Microbial spoilage primarily results from the activity of bacteria, yeasts, and molds, which thrive under favorable environmental conditions. These microorganisms can lead to food poisoning and spoilage through the production of off-flavors, discoloration, slime formation, and the accumulation of harmful toxins. …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 14, Issue 1, 2025 · pp. 6–9 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Algal Biomass Production and its Utilization
Abstract: Algal biomass production is gaining traction as a promising source of bioenergy due to its rapid growth rate and ability to utilize carbon dioxide emissions. Algae, being photosynthetic organisms, require sunlight, CO2, and optimal growth conditions for biomass increase. Temperature, light intensity, pH, aeration, mixing, and salinity play crucial roles in achieving optimum growth. Algae cultivation can occur in various water resources without competing with conventional agriculture. Microalgae, with their …
Published in Research & Reviews : Journal of Botany · Vol. 13, Issue 1, 2024 · pp. 15–21 Read article
-
Influence of Microcrack Healing on Interface Bond Shear Strength of Asphalt Concrete
Abstract: The flexible pavement layers are susceptible to cracks throughout its service life under the repeated loading and environmental impact. However, microcracks can heal itself through rest period and variation in temperature. In this investigation, the influence of microcrack healing on the interface shear strength of asphalt concrete was assessed. Two types of tack coat (rapid curing cutback RC-70 and cationic medium setting emulsion CMS) and three application rates have been …
Published in Trends in Transport Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 18–28 Read article
-
Evaluation of Heat Stress Exposure to Occupational Workers at Workplace
Abstract: Heat stress is considered as an occupational health hazard encountered in indoor as well as outdoor environments. In industries, many operations are carried out which involve either heat generating sources like boiler, furnace, dryers etc. or hot operations like welding, melting, glass blowing and pouring. Moreover, the extremes of temperature in summer also add to the level of exposure to heat stress. Exposure of occupational workers to heat stress can …
Published in Journal of Industrial Safety Engineering Read article
-
Evaluation of Heat Stress Exposure to Occupational Workers at Workplace
Abstract: Heat stress is considered as an occupational health hazard encountered in indoor as well as outdoor environments. In industries, many operations are carried out which involve either heat generating sources like boiler, furnace, dryers etc. or hot operations like welding, melting, glass blowing and pouring. Moreover, the extremes of temperature in summer also add to the level of exposure to heat stress. Exposure of occupational workers to heat stress can …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 1, 2022 · pp. 9–15 Read article
-
The Role of Surface Treatments on Mechanical and Interfacial Shear Strength of Pineapple Leaf Fibers
Abstract: Natural fibers are seen as having potential application as reinforcing agents in polymer composite materials due to their main advantages, which include moderate strength and stiffness, low cost, and being an environmentally beneficial, degradable, and renewable material. They are susceptible to absorbing moisture because of their innate hydrophilicity, which can weaken or plasticize the adherence of the fibers to the surrounding matrix and impact the performance of composite materials employed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 18–28 Read article
-
Creep Analysis Characterization and Study of Biodegradation Effect on Compression Molded LDPE/Cellulose Composites
Abstract: AbstractSynthetic polymers are important industrial materials, but their everyday use is hazardous to the environment. The solution to this seems to lie in modification of their structure through blending with biopolymers. Low density polyethylene (LDPE) and Cellulose were used in sample preparation for research in this work. LDPE/starch composites have undesirable properties and so there was need to explore LDPE/cellulose composites and evaluate their susceptibility to primary biodegradation. Compression molded …
Published in Journal of Polymer & Composites · Vol. 2, Issue 1, 2023 · pp. 37–45 Read article
-
Climate Change and Urban Heat Islands in India: A Review Across Nine Urban Agglomerations
Abstract: Since 1901, anthropogenic climate change has raised India's mean surface temperatures by about 0.9°C, compounding warming. Rapid urbanization creates persistent Urban Heat Islands (UHIs), making cities dangerously hotter than rural areas. A combination of these forces presents acute thermal hazards to hundreds of millions of urban dwellers. The paper discusses the emergence and intensification of UHI in nine large Indian cities (Delhi-NCR, Ahmedabad, Chennai, Hyderabad, Kolkata, Pune, Bengaluru, Mumbai, and …
Published in International Journal of Climate Conditions · Vol. 3, Issue 1, 2026 · pp. 19–34 Read article
-
Role of Fatigue and Creep in Structural Damage: A Comprehensive Review
Abstract: Fatigue and creep are two critical degradation mechanisms that significantly influence the structural integrity and longevity of engineering materials. These phenomena arise due to different loading and environmental conditions but often coexist in various industrial applications, leading to severe material degradation over time. Fatigue primarily results from cyclic loading, where repeated stress variations induce microstructural damage and crack initiation, ultimately causing catastrophic failure. Conversely, creep occurs under sustained stress at …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 22–26 Read article
-
Advances and Challenges in the Development of High-performance Silicon Carbide (SiC) Power Devices
Abstract: Due to its distinct features, silicon carbide (SiC), a wide-bandgap semiconductor material, has attracted a lot of attention lately. SiC has superior electrical characteristics compared to silicon, making it an attractive material for high-performance power electronic devices. SiC-based devices can operate at higher temperatures, higher voltages, and higher switching frequencies, which can result in increased power density and efficiency. Recent advances in SiC device technology have led to the development …
Published in Journal of Semiconductor Devices and Circuits · Vol. 9, Issue 3, 2022 · pp. 15–20 Read article
-
Carbon-Based Supercapacitors Evolutionizing EVs
Abstract: The relentless pursuit of efficiency in transportation, particularly in electric and hybrid vehicles, hinges on sophisticated energy management systems. Regenerative braking, a technology that offers a significant opportunity for improving fuel economy and extending battery life. However, the effectiveness of regenerative braking is often hampered by limitations in energy storage systems. Traditional batteries, while excellent for sustained energy delivery, struggle with the rapid charge and discharge rates required by aggressive …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 66–76 Read article