Search
1975 articles for “study analysis” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Comparative Evaluation of Different Thread Design on Stress Distribution in a Solid Screw Implant: A 3-Dimensional Finite Element Analysis Study
Abstract: Stress concentration on implant or implant bone interface can cause relative microfracture at the interface between implant and bone, fracture of the implant, loosening or fracture of components of implant system and bone resorption so it is important to understand the stress distribution pattern for implant with different thread pattern as thread design can have a direct influence on the stress concentration. The study was conducted with the aim to …
Published in Research and Reviews: A Journal of Dentistry · Vol. 8, Issue 2, 2017 · pp. 10–15 Read article
-
Progressive collapse analysis study of rc building:a review
Abstract: The progressive collapse of building is that the collapse of whole building or a part of building in progressive manner thanks to spread of local failure from element to element. thanks to progressive collapse there'll be severe loss of building and lifetime of humanity as progressive collapse happens suddenly. Toavoid the loss got to design a building by proper study and analysis of building for progressive collapse. thanks to earthquake, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 13–19 Read article
-
Investigation of Undesirable Event by Fault Tree Analysis - Study of domestic LPG Gas Leak
Abstract: Fault tree analysis (FTA) is a dependable and commonly used method for analyzing and identifying the combinations of failures, faults, or events that could result in a specified top event, which is typically a system failure or malfunction. FTA is widely used in risk assessment, reliability engineering, and system safety analysis, and it has proven to be an effective tool for determining the likelihood and consequences of potential system failures. …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 1, 2023 · pp. 13–18 Read article
-
Flooding of Urban Drainage Systems: Risk Analysis Study
Abstract: Floods are considered as to be among the most severe natural disasters because of their unpredictability, their overwhelming power and the difficulty to assess the related risks. Consequently, flooding damage is inevitable. This paper focuses on the identification of potential flood hazards in urban drainage systems. The flooding causes and modes are analyzed by two main methods: fault tree and event tree. The frequencies of natural events and operational obstacles …
Published in Journal of Water Resource Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 1–5 Read article
-
Study Analysis of Nano Particle based Fiber Reinforced Plastics (FRP) Composites
Abstract: Utilization of Fiber reinforced plastics (FRP) composites for development of new and modification of already present structures has increased largely in the past few decades. Fiber Reinforced Polymer composites have many qualities like corrosion resistant, longer life time, less weight, specific stiffness and high strength, are effortlessly built, and can be custom-made to fulfill execution prerequisites [1]. Fiber Reinforced Polymer composites are ordinarily manufactured utilizing a polymer framework, for example, …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 17–22 Read article
-
Study Analysis of Decisive Cost and Quality
Abstract: In this article, we discuss the beneficial level of a machine according to its features. Here, two methodologies are used to take decision according to some internal features and external aspects. First use analytical hierarchy process method for survey. Generally, parameters generated by analytical hieratical process (AHP) is preferred by consumers. Nowadays quality is most preferable parameter (in cutting machine use 46% approximate). Second one is productivity (33% approximate); we …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 20–28 Read article
-
Study and Analysis on Multi-gate MOSFET Design
Abstract: AbstractMulti-gate MOSFET is the emerging technology that is used in the area of low-power VLSI design. Multi-gate devices provide much better advantages over conventional MOSFET. As less power dissipation, decrease size, and more operational value could be obtained. Multi-gate MOSFET devices also reduce cost of production. Thus, design of electronics devices based on multi-gate technology is beneficial in today’s requirement. Basic MOSFET due to its reduction in size shows short …
Published in Journal of Semiconductor Devices and Circuits · Vol. 7, Issue 1, 2020 · pp. 1–7 Read article
-
A Case Study on Analysis of Road Safety concerns on a stretch of National Highway 12 in Rajasthan
Abstract: AbstractRoad safety is a growing social concern in the present day world. Rapid expansion in the road network and high motorization growth has led to serious impacts on road safety levels in India. The analysis of road accident data 2015 reveals that about 1,374 accidents and 400 deaths took place every day on Indian roads, which further converted into 57 accidents and loss of 17 lives on an average every …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 1–7 Read article
-
A Review Study on Analysis & Design of Electrical Transmission Towers
Abstract: Due to the increasing demand of electrical energy, the analysis & design of transmission line towers is very important. Out of total cost of transmission lines the transmission line towers constitute about 28 to 42 percent. This research paper presents an overview of research work done regarding the analysis & design of transmission line towers. Study focuses on types, member section types, geometry, capacity, base condition, important parameters of analysis …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 1, 2019 · pp. 1–7 Read article
-
Studies and Analysis of Perception of Workers Occupation in Hot Environment in Foundry Industry
Abstract: Foundry industry in India is the largest contributor in Indian economy. Safety in foundry industry is of great importance to build the relationship between employers and workers, and also for business growth. It also shows interest of employers on safety and well-being of workers, and to safeguard them from occupational diseases and disorders. Therefore, this research study insights the safety analysis of foundry industry and finds the perception of workers …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 1, 2016 · pp. 26–33 Read article
-
Study and Analysis of Polymer / Composite Thermal Insulation Material and Comfort Based Building Simulation with Applicability of Evaporative Cooling
Abstract: In India, about 35% of India's electrical energy is absorbed by buildings. Of this, the significant consumption is for the cooling purpose in building. Passive cooling systems, by comparison consume considerably less energy than mechanical cooling systems. Therefore, it is very important to understand the applicability of the passive cooling system by conducting comfort-based simulation of building as well as an examination of the influence of thermal insulation composed of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 21–29 Read article
-
Study and Analysis of Labour Management on Building Construction Project
Abstract: The term "labour management" describes a business's procedures and guidelines for adhering to national and international labour laws as well as client demands. In order to increase labour productivity, this study sought to measure the efficacy of a number of implemented management strategies, such as resource scheduling, advanced construction methods, labour management, training, communication, supervision, planning, and incentive programs. Labour management is an important parameter considered on site because the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 20–31 Read article
-
A Finite Element Analysis to Study the Effect of Hydrostatic Pressure on Steel Ductility
Abstract: The effect of superimposed hydrostatic pressure on percentage reduction of area (a gauge mark of the ductility) is investigated in round steel bars in tensile stress by employing a finite element analysis (FEA) with 8-node serendipity quadrilateral elements and von Mises plasticity flow rule in an elastoplastic power law hardening model. It is demonstrated that a linear relationship exists between the pressure and percentage reduction of area at any given …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 41–51 Read article
-
Study and Analysis of Body Postures Using Ergonomic Assessment Tools in Drilling Operations
Abstract: Ergonomics is one among the major factor that is curiously viewed by the modern world. Musculoskeletal disorder and awkward posture are the two dominant issues in ergonomics. The paper aims at studying and analyzing various musculoskeletal disorders, body postures, and other ergonomic aspects in vertical drilling operation in a laboratory work place using engineering students. Drilling is an operation in which ergonomic issues arise. Drilling is the most common operation …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 1, 2015 · pp. 28–42 Read article
-
Study and analysis of the Double Data Rate SDRAM Controller for High-speed Interfacing with Processing Device
Abstract: A real-time embedded system must now manage many programs running concurrently. Increased Data Rate Because of its burst access, speed, and pipeline features, synchronous DRAM is a typical memory-building material. DDR transfers are performed using synchronous dynamic access memory. The memory controller must be set with a pipelined design for various applications and systems to perform effectively. The purpose of this study is to design a DRAM controller that will …
Published in Journal of VLSI Design Tools and Technology · Vol. 14, Issue 1, 2024 · pp. 8–13 Read article
-
Study and Analysis of Sewing Section in Garment Industry
Abstract: The production process in a garment industry is categorized into Fabric sourcing, Cutting and bundling, sewing, finishing and dispatching. Sewing section is the most important and critical process, the garment is completed and is suitable to be worn. Rolls of fabric which are cut and folded are sewn to specific three dimensional shapes in very complex ways require a high level of skill and experience. For maximum production in the …
Published in Trends in Machine design · Vol. 5, Issue 3, 2018 · pp. 27–33 Read article
-
Study and Analysis of Developments in ChatGPT and Impact on Humanity
Abstract: This research paper examines the ChatGPT model of Artificial Intelligence, including its architecture, training process, applications, issues, and future advancements. ChatGPT employs a transformer-based design and undergoes pre-training and fine-tuning procedures. Its applications are conversational AI, translation, content generation, and research. In the real world, you can find it helping in online shops, banks, hospitals, and customer service. We also want to make sure it treats everyone fairly, stays safe, …
Published in International Journal of Mobile Computing Technology · Vol. 1, Issue 2, 2023 · pp. 18–25 Read article
-
Study and Analysis of Solar Cabinet Dryer with used of Solar Selective Material
Abstract: Using solar cabinet dryer is in many agriculture places, cold industrial places where heated regions require. This setup is useful for high work output and much area cover-up. Usually use simple solar cabinet dryer which is no more sensitive for precision workplace because its performance is low. So, use mixed mode solar cabinet dryer which conclude multi tray adjustable, cover by maximum possible area, using heater and fan which responsible …
Published in Journal of Thermal Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 52–58 Read article
-
A Step by Step Method for Carrying Out Earned Value Analysis: Case Study of a Road Project
Abstract: A framework of Earned Value Management (EVM) is proposed with the help of case study of a road project completed by Al Tamak, Abu Dhabi (UAE). The framework gives emphasis on the process part (i.e. before the actual start of project monitoring) of Earned Value Management through MS-Project. This framework will help in measuring and managing the variances in schedule and cost of the project in terms of money. The …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 3, 2015 · pp. 18–24 Read article
-
EXPERIMENTAL STUDY AND ANALYSIS OF COMPRESSIVE STRENGTH IN NOBAKE SAND
Abstract: No bake molds are expendable sand molds, similar to typical sand moulds, except they also contain a quick-setting liquid resin and catalyst. In no bake molding process the moulding sand is poured into the flask and held until the resin solidifies, which occurs at room temperature. It is called as a cold-setting process, as there is no heat involved in it. As a result of this molding process, mold produced …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 2, 2018 · pp. 18–22 Read article