Search
71 articles for “short-circuit current”
-
Perovskite-Silicon Thin Film Based Tandem Solar Cell
Abstract: A perovskite-microcrystalline silicon-based thin-film tandem solar cell was designed and investigated, where perovskite and microcrystalline cells used as top and bottom cells, respectively, for better and higher light absorption utilizing the very high open-circuit voltage. The study was carried out for simulation results of quantum efficiency and short circuit current based on different thicknesses of the top and bottom cell-intrinsic layer. A very good short circuit matched current has been …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 2, 2020 · pp. 23–29 Read article
-
Performance and Degradation Analysis of PolyCrystalline PV Modules Installed in Tropical Conditions
Abstract: In this paper, practical field performance of poly-crystalline solar photovoltaic (PV) modules, which were installed at rooftop of the department of electrical engineering BVRIT, has been studied and the correlation between efficiency, temperature and degradation rate of modules as per STC conditions has been presented. The nominal output power of the PV module considered for the study is 240 Wp and the panel is compressed of 60 cells in a …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 4, Issue 3, 2016 · pp. 5–10 Read article
-
Variation of PbS Layer Thickness in Colloidal Quantum Dot Solar Cell
Abstract: The broad tuning of semiconductor band structure is proposed for colloidal quantum dot via the quantum size effect by several workers. In this paper, we define brief details on effect of the thickness of lead sulphide (PbS) layer as the absorbing photovoltaic materials in the colloidal CQD solar cell and show their effect on the performance of the solar cell. The calculated results shows that with lower thickness of 180 …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 6, Issue 1, 2019 · pp. 1–4 Read article
-
On the Interplay between Surface Roughness and Cell Thickness for Efficient CZTS Thin Film Solar Cells
Abstract: Today's thin-film photovoltaic technologies comprising CuInS2 (CIS), CuInGaSe2 (CIGS) and CdTe elements that are costly and rare and in the earth crust such as In, Ga, Te and toxic like Cd. Henceforth, in future, expense decrease, proficient and expanded creation, utilizing bounteously accessible nonharmful components, appear to be the fundamental issue to deliver large scale manufacturing and effective sunlight-based cells. Cu2ZnSnS4 (CZTS), having the kesterite structure, is perhaps the most …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 1, 2021 · pp. 16–24 Read article
-
Photochemical Studies of Photosensitive Compound in DSS Cell
Abstract: Solar energy is our earth’s primary source of renewable energy. It is one of the most resourceful sources of energy for the future. A technique for converting solar energy into electrical energy via formation of energy rich species that exhibit the photo-solar effect is known as DSS cell. Therefore, the present study of DSS cell of Carbol Fuchsin (PC) with efficiency enhancer chemicals such as TEA reductant in alkaline media …
Published in Journal of Semiconductor Devices and Circuits · Vol. 4, Issue 3, 2017 · pp. 21–29 Read article
-
Design of Lead-Free Perovskite (CH3NH3SnX3, X=I) Solar Cell using SCAPS-1D
Abstract: Research on renewable energy conversion technology has accelerated due to the world's growing energy needs. Researchers from all over the world are interested in lead-based perovskite materials. These cells are being developed as a substitute for conventional solar cells (SCs) because they have the potential to increase solar energy conversion efficiency. Lead's advantageous electrical and optical characteristics make it a viable option for photovoltaic and optoelectronic applications. Lead's limited material …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 1, 2025 · pp. 37–43 Read article
-
Impact analysis of CuSCN in Perovskite (CH3NH3PbI3) Solar Cell as Hole Transport Layer
Abstract: The comprehensive modelling and numerical simulation of perovskite solar cell’s were carried out utilizing perovskite materials such “methyl ammonium lead iodide (MAPbI3, MA= CH3NH3)” with the help of SCAPS tools and measured the measurements like "open-circuit voltage (Voc), fill factor (FF), power conversion efficiency (PCE), and short-circuit current density (Jsc) of the MAPbI3 material used as active layer, respectively.” In the modelled structure of the perovskite solar (Fig 1 as …
Published in Journal of Microcontroller Engineering and Applications · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Evolution of Protection Coordination Methods in Power Distribution Systems: A review
Abstract: This comprehensive paper presents a broad-ranging exploration of the multifaceted challenges inherent in coordinating over-current relays within distributed generation (DG) systems in the context of power grids. Within these systems, the pivotal roles of both protective devices and the overarching protection system are highlighted, emphasizing their joint responsibility in detecting short-circuit currents and swiftly isolating faulty components. The primary objective of this protection coordination is to ensure the meticulous selection …
Published in Journal of Power Electronics and Power Systems · Vol. 13, Issue 3, 2023 · pp. 9–16 Read article
-
Triboelectric Charge Density Enhancement in Zinc Oxide Decorated Polymer Nanogenerators for Energy Harvesting Systems
Abstract: The growing need for wearable electronics, wireless sensor networks, and IoT devices has pushed research on triboelectric nanogenerator for long-term energy harvesting. However, traditional polymer-based TENGs' low triboelectric charge density restricts their energy conversion efficiency and practical performance. This research presents a zinc oxide (ZnO)-decorated polymer triboelectric nanogenerator designed to enhance surface charge density and improve electrical output. ZnO nanoparticles were synthesized using a hydrothermal method and uniformly deposited onto …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
IoT-Connected Transparent Conductive Polymer–Silver Nano-Wire Electrodes for Real-Time Performance Monitoring of Flexible Solar Panels
Abstract: Flexible photovoltaic technologies have emerged as promising energy harvesting solutions for wearable electronics, portable power systems, and Internet of Things (IoT)-enabled smart devices. However, the limited mechanical durability of conventional transparent conductive electrodes and the lack of integrated real-time monitoring restrict their long-term reliability. This study presents an IoT-connected transparent conductive polymer–silver nanowire (PEDOT:PSS–AgNW) hybrid electrode for flexible solar panels, combining high optoelectronic performance with continuous wireless performance monitoring. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 1–18 Read article
-
Numerical Simulation and Performance Characteristics of Solid-state Dye-sensitized Solar Cell using SCAPS 1D
Abstract: In this research article, we studied the optimization and performance of a titanium oxide (TiO2) working electrode for the manufacture of solid-state dye sensitized solar cell (so-DSSC). The structure of solid-state dye sensitized solar cell used in current work is composed of FTO/TiO2/N719/PEDOT: PSS/Pt. The only variable for simulation is absorber layer. The computational simulation findings indicate that parameters of solid-state DSSC such as VOC, JSC, FF and PCE are …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 23, Issue 2, 2021 · pp. 1–11 Read article
-
Interface Engineering of Graphene Multi-Junction InGaP/GaAs/InGaAs/Ge Solar PVC
Abstract: AbstractThe main impediment faced by solar Photo-Voltaic Cell (PVC) is the excitation of charge carriers by high and low energy photons to make them reach the conduction band as this superintends the output device current. To enhance the device current, intermediate engineering of solar PVC is the most prominent strategy. An Inter-Mediate Layer (IML) serves as a spectrally selective layer between the muti-junctions for tandem solar cell. This research work …
Published in Trends in Opto-electro & Optical Communication · Vol. 8, Issue 1, 2018 · pp. 1–7 Read article
-
Dye Sensitized Solar Cells Based on Extracted Natural Dyes and Synthetic Dyes with Nanocomposite Material
Abstract: Producing dye sensitised solar cells in their original colours required a number of different techniques. Plants and berries were used to extract these dyes. The DSSCs were manufactured by recycling the old dyes. It was clear that the efficiency of the power conversion was deteriorating. TiO2 mesoporous films' potential applications were also studied. This study employed electrochemical impedance spectroscopy to examine the interactions of natural dyes with TiO2. Bi2O3 nanoparticles …
Published in Journal of Polymer & Composites Read article
-
Recent Progress in the Development of High- Efficiency Perovskite Solar Cell Using Copper Iodide (CuI) as Hole Transport Layer
Abstract: Solar cells are a practical option that could potentially require additional energy sources for developing new clean energy. A renewable source of electricity is characterized by its affordability, accessibility, and zero emissions from greenhouse gases. By converting sunlight photons into electrical power, photovoltaic cells are a viable option. The last two decades have witnessed numerous material opportunities for scientific advancements in photovoltaic technology, which have resulted in reduced costs and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 11, Issue 1, 2024 Read article
-
Study of Perovskite (CH3NH3PbI3) Solar Cell using CuI (Copper Iodide) as Hole Transport Layer (HTL) at different thickness of HTL layer
Abstract: While solar energy is a viable option, future clean energy solutions may require other energy sources. Renewable electricity sources are known for being affordable, easy to access, and not producing greenhouse gases. Photovoltaic cells, which turn sunlight into electrical power, are a good choice. Over the last twenty years, advancements in photovoltaic technology have lowered costs and improved the efficiency of solar cells. Perovskite materials, recognized for their unique crystal …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 2, 2024 · pp. 1–11 Read article
-
Modern Progress in the Advance of High-Efficiency Perovskite (CH3NH3PbI3) Solar Cell using different Hole Transport Layer
Abstract: One viable alternative for creating new clean energy is solar cells, although they might need additional energy sources. The affordable, easily accessible, and greenhouse gas-free nature of a renewable energy source are its defining characteristics. An alternative that can generate power by converting solar photons into electrical energy is a photovoltaic cell. Over the past 20 years, scientific advancements in photovoltaic technology have presented a number of real-world opportunities that …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 2, 2024 · pp. 20–29 Read article
-
Analysis of Perovskite (CH3NH3PbI3) Solar Cells Using Cu2O as a Hole Transport Layer (HTL) with Varying ETL Thickness
Abstract: Solar cells offer a viable option for creating new clean energy solutions, though they may require supplementary energy sources. Renewable electricity sources, known for being affordable, accessible, and greenhouse gas-free, are increasingly popular. Photovoltaic cells, which convert sunlight into electricity, stand out as an excellent choice. Over the past two decades, advancements in photovoltaic technology have significantly reduced costs and enhanced the efficiency of solar cells.[4] Perovskite materials, recognized for …
Published in Journal of Nuclear Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 38–48 Read article
-
Design and Analysis of Quantum Dot Solar Cell Using SCAPS-1D Software
Abstract: Compared to conventional solar cells, quantum dot solar cells (QDSCs) have drawn a lot of attention due to their hybrid structure, low production cost, and greater power conversion efficiency. Nevertheless, carrier recombination in the quasi-neutral region (QNR) continues to limit their performance. The electron transport layer (ETL) and hole transport layer (HTL) are two of the layers that are most important in determining the overall efficiency of the device. The …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 1, 2026 · pp. 15–20 Read article
-
Chlorophyll-Mimicking Ti₃C₂Tₓ MXene-Conjugated Polymer Nanocomposites: Nature-Inspired Exciton Funneling Architecture for Ultrahigh Photon-to-Electron Conversion in Organic Solar Cells
Abstract: Green plant photosynthetic machinery is one of the most efficient natural systems for harvesting solar energy and converting it into useable electronic charge. Specifically, chlorophyll molecules in the Light-Harvesting Complex II (LHC-II) achieve nearly unity quantum yield via a well-organized Förster Resonance Energy Transfer (FRET) mechanism that enables excitons to migrate towards reaction centers. This study presents a bio-inspired nanocomposite architecture using two-dimensional Ti₃C₂Tₓ MXene nanosheets functionalized with chlorophyll-mimicking porphyrin …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 114–130 Read article
-
Investigating the Effect of Spectral Variations on the Performance of Monocrystalline, Polycrystalline and Amorphous Silicon Solar Cells
Abstract: The study of spectral variations is very important in the characterization of silicon solar cells. The spectral variations of monocrystalline, polycrystalline and amorphous solar cells is studied through the spectral response with the help of spectral response evaluation meter, CEP-25HS-50SR. PVsyst 6.4.3 software is used to study the variation of air mass throughout the day and the year and to understand that how solar irradiance varies with the changing air …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 3, 2016 · pp. 28–36 Read article