Search
116 articles for “High Strength Steel”
-
Springback of High Strength Steel Sheet and Preventive Measures
Abstract: The purpose of this paper is to improve the accuracy output of cold stamping product by accommodating springback. This is an experimental study to improve the accuracy of springback analysis and die compensation process during CAE of part. The springback shape and the target part are used to optimize the die surfaces compensating springback. This paper describes the springback behavior of HSS steel based on phenomenon and preventive measures based …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 24–31 Read article
-
High Strength Bolt Tightening and Verification Techniques for Steel Connections: In-Depth Study and National Survey
Abstract: The current means and methods of verifying that high strength bolts have been properly tightened is very laborious and time consuming. In some cases, the techniques require special equipment and in other cases the verification itself may be somewhat subjective. While some commercially available verification techniques do exist, there are drawbacks such as being costly, time-consuming, and impractical to use in the field. The main objectives of this project were …
Published in Journal of Construction Engineering, Technology & Management Read article
-
Thin-in-slab-in-caster to Pursue Heat-in-treat
Abstract: This paper is to resolve the latest scenario in slab caster to suggest fabrication of slab after integrating as well successive next add an addendum formation to end production. Direct thin section produced from existing heat in cast thin slab has been utilized by successive roll reduction and also heat treatment. Endless strip processing (ESP) has linked continuous thin down formation to subject modification of microstructure from as cast to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 1, 2021 · pp. 30–37 Read article
-
Microstructure Property relation in thermo-mechanical control processed Low Carbon Microalloyed Steel for LPG Cylinder
Abstract: LPG Cylinder manufacturing is a cylindrical forming process which involving strength as well as deep drawing and welding properties. An LPG cylinder is a safety critical components and demands very careful selection of steel quality. LPG cylinder is undertaken in India mainly by using a superior grade Al-killed low-carbon micro alloyed steel with limits of S and P control, under the specification of IS 6240, IS 15914, EN 10120 and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 16–19 Read article
-
Laser Beam Machining Techniques and Applications: A Review
Abstract: Laser beam machining (LBM) is the most common thermal energy-based non-contact, non-conventional machining process. The non-conventional manufacturing processes are used to remove extra material using a variety of mechanical, thermal, electrical, chemical, or combinations of these energies without the use of sharp cutting tools as is required for conventional manufacturing. With innovative approaches to manufacturing processes, it has transformed a number of industries. It is frequently used to machine a …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 28–35 Read article
-
The Quicklift: Redefining Car Jack Dynamics & Design
Abstract: A Jack is a tool that aids in raising the vehicles without considerable physical efforts and thereby reducing strain injuries. This paper is about designed model of Jack and performing the static analysis (viz:structural) with the help of Solid works software. The outcomes obtained demonstrates that jack can be used safely. Additional improvements to be made in the jack is by modifying the vertical cylindrical bar so that it can …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 86–92 Read article
-
Estimation of Rock Participation Factor through Hydro Tests of Pressure Shafts: A Case Study
Abstract: Pressure shafts for conveying water from fore-bay reservoir to power generating units are designed by taking advantage of surrounding rock mass in sharing internal design pressure. The ratio of internal pressure shared by surrounding rock mass to design pressure is known as rock participation factor (RPF). It is a very important parameter in economizing the cost of pressure shafts through saving of high strength steel. However, to ascertain share of …
Published in Journal of Water Resource Engineering and Management · Vol. 2, Issue 2, 2015 · pp. 6–12 Read article
-
Phase Transformation of Manganese Steel: A Role of Alloying Elements
Abstract: Low alloyed steels that are both strong and ductile are the primary focus of new material concept work due to economic considerations. One key to making good use of these materials is applying the right heat and thermo mechanical treatments. Phase transitions can be influenced by using different alloying procedures. Microstructural evolution and mechanical characteristics were investigated in relation to varying manganese, silicon, and chromium levels. Developing high-strength flat rolled …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 15–20 Read article
-
Study of High Strength Fiber Reinforced Metakaolin Concrete under Flexure and SplitTensile Strength
Abstract: An experimental investigation was carried out to study the effect of inclusion of metakaolin and steel fibers on high strength concrete in flexure and split tensile strength. The beams of 150x150x700 mm were casted. M60 grade of concrete was used. Superplasticizers were used to improve workability. The metakolin was added upto 20% with the increments of 5% and steel fibers were added upto 5% with the increment of 0.5%. Various …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 70–80 Read article
-
PERFORMANCE STUDY ON SOIL STABILIZATION USING HIGHLY VULCANIZED RUBBER SHEET
Abstract: Roads are the major constructions. In India the road networks comprises of about 59,03,293 kilometers. The aim of this project is to replace the base course of the WBM with rubber and steel stacked mats. Over 1 million tonnes of rubber tyre wastes are produced in India and about 15 million tonnes of rubber tyre wastes are produced. In that about 60% of the rubber wastes are recycled. The reason …
Published in Trends in Transport Engineering and Applications · Vol. 9, Issue 1, 2022 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
A Review on Mechanical Behavior of Various Strength And Flexure Parameters on Hardened High Strength Fiber Reinforced Concrete (HSFRC)
Abstract: This Review paper presents the Study for effective use of different shapes Steel Fibre for enhancing Flexural capacity of High Strength Concrete Beam, Along with Compressive & tensile strength. The flexural tensile strength or modulus of rupture (MOR) of concrete generally referred to tensile strength is an important parameter for determining deflection, minimum flexural reinforcement and to compute the on-set of visible cracks in a concrete structure under flexure. It …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 1–5 Read article
-
Understanding the Delamination and Its Effect on Charpy Impact Energy in Thick Wall Linepipe Steel
Abstract: The thick wall linepipes produced from thermo-mechanical-controlled hot-rolled high-strength low-alloy steel (HSLA) plates are characterized by heterogeneity of microstructures through thickness. This microstructural heterogeneity results delamination and is responsible for substantial differences in the toughness behavior of the linepipe steel. The objective of this research work was to investigate these differences in impact energy using Charpy V-notch impact test in correlation with microscopic observations on fractured surfaces of the selected …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 1, 2014 · pp. 31–39 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
Effect of Ground Water Sodium Chloride Attack on Reinforced Concrete Footings
Abstract: In footings construction, it is very important to protect the reinforced concrete in direct contact with the soil from the ground water attack, especially if it is consisting of risky salt such as NaCl. One of the main objectives of this paper is to study the effect of ground water NaCl attack on the compressive strength and on steel reinforcement of footings, which is usually subjected to ground water. The …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 1, 2017 · pp. 1–7 Read article
-
A Review on joining super austenitic stainless steel AISI 904L
Abstract: Super austenitic stainless steel AISI 904L is the commended material for high corrosion resistance and strength requirements. Super austenitic stainless steels are widely employed in applications like aerospace, automotive, marine, industrial applications. The process of joining of super austenitic stainless steel can be done with several conventional arc welding processes, but micro plasma arc welding which promotes high heat inputs and low dilution of the welds which makes joining of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 26–37 Read article
-
Sustainable Ground Improvement Using Industrial Waste: Steel Slag as Granular Columns
Abstract: The increasing demand for infrastructure development on weak and compressible soils has necessitated the adoption of effective ground improvement techniques. At the same time, the rapid growth of the steel industry has resulted in the generation of huge quantities of steel slag, posing significant environmental and waste management issues. This paper focuses on the sustainable utilization of steel slag as a substitute material for granular columns in ground improvement applications. …
Published in Journal of Geotechnical Engineering · Vol. 13, Issue 2, 2026 · pp. 14–20 Read article
-
Evaluation of Compressive Strength of Concrete Using Fly Ash, Silica Fume, and Steel Slag as Cementitious and Aggregate Replacements
Abstract: This study comprehensively investigates the influence of supplementary cementitious materials and industrial by-products—specifically fly ash, silica fume, and steel slag—on the compressive strength of concrete. The primary objective is to evaluate the impact of both individual and combined replacements of cement and aggregate components on concrete performance. The research analyzes how varying proportions of these materials affect the strength characteristics of the concrete mixtures. Experimental results demonstrate that increasing the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Influence of Cementitious and Aggregate Replacements on the Compressive Strength of Pervious Concrete
Abstract: Pervious concrete is a sustainable construction material designed to enhance stormwater management while maintaining adequate mechanical strength. This study investigates the compressive strength of pervious concrete cubes with various cementitious and coarse aggregate replacements. The research examines the effects of fly ash, silica fume, steel slag, and rubber chips on compressive strength at 7 and 28 days of curing. The results indicate that moderate fly ash replacement enhances compressive strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 9–14 Read article
-
Processing of Magnesium Metal Matrix Composite Reinforced with Graphene Nano Platelets through Vacuum Stir Casting and Investigating its Mechanical Behaviour
Abstract: AbstractThe application of metal matrix composites (MMCs) as structural engineering materials has received increasing attention in recent years. Their high strength and toughness at elevated temperatures coupled with low-density makes them suitable for use in applications where conventional engineering materials, such as steel are used. MMCs exhibit significantly higher stiffness and mechanical strength compared to matrix alloys, but often suffer from lower ductility and interior fracture toughness. MMCs have the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 21–29 Read article