Search
17 articles for “Flow separation control”
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness Element on the Suction Surface of an Airfoil
Abstract: Computational investigation carried out to the effects of a two-dimensional roughness element placed on the suction surface of a zero camber airfoil of 1 m chord on its performance is presented. The roughness element was placed on suction surface of the airfoil at a distance of 30% from the leading edge of the airfoil. The roughness element was in the form of a wire. The diameter of the wire was …
Published in Recent Trends in Fluid Mechanics · Vol. 9, Issue 3, 2022 · pp. 12–26 Read article
-
Influence of Flow Control Devices on Aerodynamic Characteristics of Wind Turbine Blades: A Comprehensive Review
Abstract: The growth of the wind energy sector has increased the need for enhanced techniques with the goal of improving the efficiency and reliability of wind turbines. As the size of wind turbines increases, there is a noticeable increase in energy loss, problems with fluctuating loads, and structural damage. This suggests that effective techniques need to be implemented in order to improve their efficacy. Methods for flow control, including passive and …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 · pp. 52–88 Read article
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 45–52 Read article
-
Design and Implementation of IoT-enabled Movable Road Divider for Vehicular Traffic Control
Abstract: Road dividers are widely used to separate continuous and incoming traffic on road. This is useful for maintaining traffic flow. In this case, there are equal numbers of lanes for incoming and continuous traffic. However, in specific zones, such as industrial or shopping zones, traffic generally flows in one direction in the early morning or late at night. There is nothing or no use on the other side of the …
Published in Journal of Control & Instrumentation · Vol. 14, Issue 3, 2023 · pp. 29–35 Read article
-
Flow Reversal and Pressure pulsation: Innovative technique to enhance flux in Nanofiltration
Abstract: Reduction in Permeate flux with the period of time is the major drawback for the Pressure-driven membrane processes. Concentration polarization and membrane fouling are the two major limitations for the Pressure-driven membrane filtration processes. They lead to the severe flux decline and that need to be controlled for the better process efficiency. The resistance determination provides basis for selection of membrane and appropriate pressure –driven separation process. This paper outlines …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 1–7 Read article
-
Study of Load Frequency Control
Abstract: This paper is an attempt to study the control of active and reactive power in order to keep the system in the steady state. In addition, simple models of the essential components used in control system are analyzed. The objective of the control strategy is to generate and deliver power in an interconnected system as economically and reliably as possible while marinating the voltage and frequency within permissible limits. These …
Published in Trends in Electrical Engineering · Vol. 6, Issue 2, 2016 · pp. 73–79 Read article
-
Optimal Allocation of STATCOM FACTS Controller for Loss Reduction and Voltage Stability Enhancement in a Nine Bus Power System
Abstract: It is being a huge concern about the complexity and severity of recent days’ power system. The main objective of the power system concern is the flexibility and fast control characteristics of power transmission between generating station to distribution grid. So, in order to have a reliable and quality power transmission, FACTS (flexible AC transmission system) controllers are introduced. Here, a shunt type of FACTS controller such as STATCOM (Static …
Published in Journal of Control & Instrumentation · Vol. 8, Issue 3, 2017 · pp. 12–16 Read article
-
Effects of non-motorized vehicle on speed-density relationship of an urban intersection
Abstract: The study investigated the influence of non-motorized vehicle (NMV) in the heterogeneous traffic in terms of speed–density (v-k) relationship. The traffic of a busy intersection of Dhaka city was studied, conducted traffic survey, and modelled using VISSIM software. Three traffic scenarios, existing traffic (M1), 20% increase of NMV (M2) and 50% increase of NMV (M3) were simulated. Then, the dataset was used to model the linear v-k relationship. The v-k …
Published in Trends in Transport Engineering and Applications · Vol. 8, Issue 1, 2021 · pp. 22–29 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Integration of IoT and Robotics for Smart Industrial Waste Management: Design and Implementation of an Automated Collection System
Abstract: All types of drainage issues are resolved by the Automatic Industrial Hazardous and Waste Collecting Machine. Washing, which also encourages blockage-free drains and a constant flow of drain water. Sewage water needs to be separated in the present period due to sufficient sewage to maintain environmental cleanliness. Both humans and the environment are severely harmed by the garbage and pollutants generated by industry and the areas around cities. Using auto …
Published in International Journal of Advanced Control and System Engineering · Vol. 1, Issue 1, 2023 · pp. 26–34 Read article
-
Recent Advancements in High-Performance Liquid Chromatography: A Comparative Approach
Abstract: Modern separation science relies heavily on chromatography, which is used in all research institutes and pharmaceutical industries all around the globe. Of all the chromatography approaches, HPLC i.e. high performance liquid chromatography is the one that is most frequently used analytically. Recent improvements in chromatographic supports and liquid chromatography (LC) equipment have made rapid and incredibly effective separations possible. This summary emphasizes the key milestones and foundational advances in HPLC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 40–48 Read article
-
Surface-Driven Capillary Flow of AqueousIsopropyl Alcohol in the Sudden Expansion PMMA Microchannels
Abstract: Author has fabricated the PMMA sudden expansion microchannels by the maskless lithography, hot embossing lithography, drilling, direct bonding and chip separation technique. The effect of channel aspect ratio on the surface-driven capillary flow is studied in the sudden expansion microchannels fabricated by PMMA as a polymeric material. Also, the effect of surface wettability on the surface-driven capillary flow is studied in the sudden expansion microchannels fabricated by PMMA. This study …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 1–4 Read article
-
Autonomous Military Robot with Short Range Radar and Guidance System
Abstract: AbstractThis paper proposes a completely wireless-based navigation system for high-speed navigation for unmanned ground vehicles (UGVs) on the varied landscape. This paper presents huge, precisely adjusted and time-synchronized datasets, accumulated outside, in controlled natural conditions, utilizing an automated ground vehicle e(UGV), furnished with a wide assortment of sensors to gauge the dynamic field. The hardware circuit is created in the "short separation radar" of the UGV way shape and longitudinal …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 2, 2020 · pp. 4–8 Read article
-
Passive Capillary Flow of Aqueous Microparticle Suspensions in the Sudden Expansion PMMA Microchannels
Abstract: AbstractAuthor has fabricated a set of sudden expansions micro channels in the polymethylmethacrylate (PMMA) microfluidic devices by the maskless lithography, hot embossing lithography, drilling, air dielectric barrier discharge (DBD) plasma processing, direct bonding technique and chip separation technique. The surface-driven capillary flow of dyed water and three individual aqueous microparticle suspensions are studied with respect to the effects of channel aspect ratio, effective viscosity and surface wettability. The number densities …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 1, 2017 · pp. 13–17 Read article
-
Stability-Indicating Rp-Hplc Development and Validation for the Estimation of Lercanidipine Hydrochloride Content in Tablet Dosage Form
Abstract: A sensitive, stability-revealing, and easy reverse-phase high-performance liquid chromatographic (RP-HPLC) technique was developed and rationalized to be in a position to determine Lercanidipine hydrochloride in ingested dosing preparations. It was separated by chromatography on a C 18 column using a mobile phase containing 10 mM potassium dihydrogen phosphate buffer and methanol (20:80, v/v; pH 4.0) at a flow rate of 1.0 mL/min and UV detected at 258 nm. The retention …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 13, Issue 1, 2026 · pp. 17–26 Read article
-
Experimental Investigation On Reactive Distillation Process For Synthesis of iso-amyl acetate
Abstract: Abstract: Reactive Distillation (RD) is a combination of reaction and distillation in a single vessel gives bonuses over conventional sequential approach of reaction followed by distillation or other separation techniques. These processes are better candidates to use it to chemical process industry. These processes proved to offer better selectivity, improved conversion, and superior heat control, operational utilization of reaction heat, choice for problematic separations, huge capital and energy price reductions, …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 1, 2019 · pp. 17–31 Read article