Search
324 articles for “Compression Testing”
-
FABRICATION AND COMPRESSIVE TEST ANALYSIS OF CARBON FIBRE REINFORCED NYLON
Abstract: AbstractThe aim of the paper is to study and investigate the effect of carbon fibers (T800), epoxy resin and hardener Tri Ethylene Tetra Amine (TETA) reinforced with nylon rod. There is a wrapping of carbon fiber done on the nylon rod which increases the compressive strength. It is found that compressive strength very with respect to variation of wrapping around nylon rod. The density of final material reduces as the …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 28–32 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Latex Modified Concrete for Development of Sustainable Architecture
Abstract: To improve the performance of concrete, latex polymer and fly ash are mixed with concrete. This paper presents the effects of using additive material styrene-butadiene rubber (SBR) Latex and Admixture Fly Ash as a partial replacement to cement in mortar mixes. In this research comparison between with or without the replacement of fly ash and polymer is studied for Compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 39–49 Read article
-
Al-MMC Foam: Synthesis and Characterisation
Abstract: Aluminium alloy composite foams are produced in the laboratory using TiH2-CaCO3 dual foaming agents. The density of the developed material varied along various cross sections. There exists a more pronounced variation in density along the direction of foaming. Compressive and tensile tests are performed on Aluminium Metal Matrix composite (Al-MMC) specimens of different relative density. The compressive stress-strain response of the material establishes their engineering utility in terms of their …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 18–27 Read article
-
Exploration of Mechanical Characteristics and Microstructural Analysis of Copper Matrix Composites with Hybrid Reinforcements via Muffle Furnace Sintering
Abstract: Metal Matrix Composites (MMCs) have drawn a lot of interest in the area of innovative materials because of how widely they may be used. Due to their extraordinary qualities, such as high thermal conductivity, higher temperature endurance, improved corrosion resistance, and great weldability, copper matrix composites stand out among them. These qualities make them desirable and promising materials for uses including heat exchangers, automotive parts, and electrical components. In this …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 119–126 Read article
-
Assessing the Variation in Cutback Asphalt Requirement for Various Geotechnical Properties of Asphalt Stabilized Soil
Abstract: The subgrade layer must be strong to resist shear failure, tensile stresses and have adequate stiffness to avoid and resist excessive pavement deformation. Available fill materials do not always meet these requirements and may require improvement of their engineering properties, soil stabilization with liquid asphalt may be an alternative to improve the stability, adhesion and waterproofing properties which are desired for embankment construction purpose. The soil in this investigation represents …
Published in Journal of Geotechnical Engineering · Vol. 2, Issue 3, 2015 · pp. 17–29 Read article
-
Experimental Techniques for Investigating Microstructural Effects on Solid Mechanics Behavior
Abstract: It is critical to comprehend the complex interaction between mechanical behavior and microstructure in order to optimize material performance and create solid engineering components. In the topic of solid mechanics, this review article offers a thorough summary of the experimental methods used to look into the influence of microstructural characteristics on solid behavior. It highlights the fundamentals, possibilities, and uses of a broad variety of experimental techniques, including as mechanical …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 3, 2023 · pp. 24–32 Read article
-
Stabilization of Heavy Metal Sludge to Pass the TCLP Test Using Cement with a Sinter as a Additive
Abstract: According to the U.S. Stabilisation is the best-proven technology now in use, according to the Environmental Protection Agency's definition in Title 40, Part 268 of the Code of Federal Regulations (40 CFR 268).This method prevents harmful contaminants from leaking into the environment by physically and chemically trapping them all in a matrix. The investigations used 15 different water-mixed combinations of cement, fly ash, sinter, and lime. The study also examined …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 16–24 Read article
-
Experimental Investigation of Various 3D Printing Materials for Making Travel Bag Wheels
Abstract: 3D printing is one of the emerging areas of manufacturing. Fused deposition modelling (FDM) is widely used 3D printing technique in various fields like jewellery, fashion, art and sculpture, medical, etc. In this paper, different polymer materials like ABS (Acrylonitrile Butadiene Styrene), PLA (Polylactic Acid), carbon fibre, PETG (Polyethylene Terephthalate), HIPS (High Impact Polystyrene), etc. were analysed for compressive strength by preparing standard specimens according to ASTM standard D695 to …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 1–7 Read article
-
TRANSFORMATION OF INHERITED ENGINEERING PROPERTIES OF SOIL DUE TO STUBBLE BURNING - A CASE STUDY
Abstract: Stubble Burning has put the state government as well as central government in deep thoughts. The smoke that emits from the farms comes in contact with the breeze to become smog that collectively moves southward affecting the entire belt of northern India including Delhi. Sometimes it becomes too difficult to breathe and public is forced to use breathing masks to avoid poisonous gas entering into their lungs. Research says inhaling …
Published in Journal of Geotechnical Engineering · Vol. 5, Issue 3, 2018 · pp. 31–36 Read article
-
Effect of lime content of lime-stabilized A-4 Soils in the Unconfined Compressive Resistance
Abstract: This paper is part of a research project carried out between Geotechnical Office of Dr. Barbero & collaborators and Weg Ingeniería, from Italy and Argentina, respectively. Given the multiple applications of soils improvement with lime, in this research we proceed to develop correlations on the bases of results obtained by geotechnical tests, according to international standards, realized in A-4 soils at different contents of lime. The goal is to have …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 20–32 Read article
-
A Preliminary Study on Biopolymerised Concrete with Sawdust as an Admixture
Abstract: In this study bio polymer obtained from Tapioca starch and sawdust in fine form were assessed for the use as partial replacement of cement materials for an application in lightweight concrete. Physical and chemical characteristics of bio polymer and sawdust were analyzed initially. Properties of concrete that has been investigated were compressive, tensile and flexural strength. The cement has been replaced by bio polymer and saw dust accordingly in the …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 1–4 Read article
-
Use of Alccofine for Better Performance in High Grade Concrete
Abstract: As India is developing country and demand for the high rise building and other construction industries are growing day by day, along with these demand for non renewable resources, concrete making materials are required. As there is demand for the materials used, there is scarcity too of the materials used. Also there are various supplementary waste in concrete like fly ash, silica fumes, etc. The main objective of our project …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 5–8 Read article
-
Design and Fabrication of a 3D-Printed Femur Model: Insights into Mechanical Properties and Implant Research
Abstract: This study is an attempt to analyse the 3D printing of the female femur model of the central India region and provides ample suggestions for bone implant research. This article discusses the design development and experimental validation of finite element analysis (FEA) results with the 3D-printed bone model. Using CT scan data, the FE analysis is executed on a real femur bone of a 25-year-old female of 52 kg weight …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 329–338 Read article
-
Experimental Research on the Strength Properties of Concrete with Recycled Aggregate, Pond Ash, and Rubber Powder Replaced in Part for Concrete Materials in Standard Grades
Abstract: Concrete, a fundamental material in modern construction, poses environmental concerns due to its significant carbon footprint. To mitigate this impact, researchers explore alternative materials like fly ash, GGBS, alcofine, and rubber powder as cement replacements. This study examines the durability and strength of concrete that contains recycled aggregate, pond ash, and waste rubber powder. Waste rubber, abundant from industrial and automotive sources, poses disposal challenges. Pond ash, a byproduct of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 11–21 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
Green Concrete Using Fly Ash and Silica Fume
Abstract: Recycled coarse aggregate can also be used by partially replacing natural concrete aggregates, so that construction and demolition waste can be further used for aggregates in new construction. Recycled coarse aggregate includes brick, tile aggregates, crushed stone aggregates, glass aggregates, and demolished aggregates. In this paper, different recycled aggregates are used by 40 and 60% replacement with natural aggregates of size 20 mm. Granite stone, brickstone, concrete debris are used …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 57–62 Read article
-
Experimental Study of Modified M20 Concrete with Waste Plastic Polystyrene Cubes
Abstract: The study of this research paper deals with the effectiveness of waste plastics used in concrete construction. The M20 concrete specimens were mixed with waste plastic material like polystyrene as cubes of different sizes such as 5, 6, 7, 8, 9, and 10 cm and were tested for their compressive strength. The standard size of waste plastic concrete specimens was 15 cm × 15 cm × 15 cm with the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 14–19 Read article