Search
25 articles for “Al-dopant.”
-
A Field Effect Transistor Synthesized using Multiple Al-doped ZnO Nanorods
Abstract: The different Al-doped ZnO nanorods and a SiO2 gate insulator has been used to make nanorod field-effect transistors (FETs). The utilization of numerous nanorods gives higher on-current without significant declination in threshold voltage move and subthreshold inclines. It has been recorded that the on-current of the different ZnO nanorod FETs increases around directly with the quantity of nanorods, with on-current flows of roughly 1.8uA for each nanorod and little change …
Published in Research & Reviews : Journal of Physics · Vol. 7, Issue 2, 2018 · pp. 72–79 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Growth and Studies of Strontium Chloride Doped Ammonium Dihydrogen Phosphate Crystals
Abstract: Single crystals of undoped ammonium dihydrogen phosphate (ADP) and strontium chloride doped ammonium dihydrogen phosphate were grown by a solution method. It is found that SCADP crystal belongs to the tetragonal crystal system with I-42d space group. It is seen that both undoped and strontium chloride doped ADP crystals crystallize in the same tetragonal system and the incorporation of dopant does not alter the crystal system. This is due to …
Published in Research & Reviews : Journal of Physics · Vol. 8, Issue 2, 2019 · pp. 89–100 Read article
-
A Study on Chemical Composition in Temperature Sensor
Abstract: As the demand for precision thermal monitoring in extreme environments – such as aerospace propulsion systems and micro-electromechanical systems (MEMS) – continues to escalate, the chemical stability of temperature sensing elements has become a critical focal point. This study investigates the correlation between the chemical composition of thin-film resistance temperature detectors (RTDs) and their operational longevity under thermal cycling. By employing X-ray Photoelectron Spectroscopy (XPS) and Energy-Dispersive X-ray Spectroscopy (EDS), …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 2, 2026 · pp. 1–7 Read article
-
Occupancy of Al 3+ /Cr 3+ ions at B-sites in Ni-Zn-Cu ferrite system synthesized by sol-gel auto-combustion method
Abstract: Ferrites find extensive application in traditional electronic, electrical, and magnetic equipment and systems.The ferrite materials substituted with different cations have become most important because of their both fundamental and technological application. In our current research, we investigate the impact of Al3+ and Cr3+ ions on the properties of nano- sized Ni0.7Zn0.2Cu0.1Fe2O4 ferrites created using the sol-gel auto-combustion process. We employ various analytical techniques, including XRD, SEM, FTIR, ESR, VSM, and …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 14, Issue 2, 2023 · pp. 47–52 Read article
-
Structure and Crystal Growth of Urea Doped P- Block Element
Abstract: Nonlinear optical (NLO) materials exhibiting second harmonic generation have attracted considerable attention over the past few decades because of their technological significance in areas such as optical communication, signal processing, and instrumentation. Urea, being an important NLO material, presents challenges in crystal growth and handling due to its highly hygroscopic nature. Various derivatives of urea have been investigated for NLO applications, and some have shown promising potential in this field. …
Published in International Journal of Crystalline Materials · Vol. 3, Issue 2, 2026 · pp. 08–13 Read article
-
Modified Solution Combustion Approach for Probing of Structural and Dielectric Properties of Sm3+ Doped GdAlO3 Nanoparticles
Abstract: A modified solution combustion approach was used in the preparation of nanosized Gd1xSmxAlO3 (x=1, 3, 5, 7, 9 mol%) using mixture of ODH and novel fuel E. tirucalli plant latex as fuels with corresponding metal nitrates. The structural morphology of synthesized and calcined powders are revealed using various analytical techniques such as Powder X-ray diffraction (PXRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 1, 2020 · pp. 16–25 Read article
-
Development of chemical photo-electronics
Abstract: This article has described to access changed perform of zinc sulphide (ZnS) after doping manganese. ZnS has been typified II-VI compound devised for optoelectronic semiconductor material. Mn-doped ZnS semiconductor nanocrystal has been explored in 1994. Scope has been synergistic to usual doped semiconductor nanoparticle, given by, CdS: Mn; CdS: Eu; ZnO: Co, Ni; ZnSe: Mn; ZnS: Cu; ZnS: Pb, Cu; henceforth, scope adjunct has been in lane pursue of ZnS: …
Published in Journal of Semiconductor Devices and Circuits · Vol. 8, Issue 3, 2021 · pp. 16–22 Read article
-
Comparison of Photocatalytic activity of Various Metallic and Non-metallic doped TiO2 Nano Particles for Treatment of Pharmaceutical Effluent
Abstract: The use of semiconductor oxide particles such as TiO2 as photo catalysts has shown great utility in the complete mineralization of organic compounds present in effluent. The dopant maximize the electron trapping for further inhibiting excitation recombination and thereby enhancing the oxidation of organic compounds. A pilot scale synthesis of TiO2 nano particles has been carried out using the Sol-gel method with various metallic dopants like Iron, Copper, Cobalt, Vanadium, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 8, Issue 2, 2018 · pp. 7–14 Read article
-
Structural and Optical Properties Investigation of Sn doped ZnTe Thin Film
Abstract: To increase the efficiency of a single-junction solar cell the Intermediate Band Solar Cell (IBSC) is proposed, where, IBSC designed to provide extra optical transitions that enable sub-band gap energy photons to participate in current generation through pumping of electrons from the valence band (VB) to the Intermediate Band (IB) and further from the IB to the conduction band (CB) hence it provide high conversion efficiency. Thin film of undoped …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 21, Issue 1, 2019 · pp. 13–20 Read article
-
A Comparative Study on Formaldehyde Detection Capabilities in Pristine Graphene and Ag-doped Graphene Sheet
Abstract: The present work concerns a detailed investigation of the enhanced formaldehyde (also known as methanal) detection by decorating the pristine (or bare) graphene nanosheet with silver (Ag) nano-particle (or foreign Ag atom). The bare graphene sheet was exposed to the formaldehyde vapor forming the formaldehyde-adsorbed pristine graphene sheet (taken as Case-I), and whose results were studied and compared with the outcomes obtained from the formaldehyde-adsorbed Ag-decorated graphene sheet (taken as …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 801–809 Read article
-
Photonic Polymer Composites for Light-Modulating Displays and High-Throughput Optical Data Transmission
Abstract: The combination of PMMA-based composites recently received substantial attention from the photonic applications field since these materials combine excellent optical transparency, mechanical flexibility and straightforward fabrication capabilities. The material performance of pure PMMA requires functional additives because it shows limited thermal properties and optical attenuation in addition to sensitivity against UV rays. The research explores developmental pathways for PMMA composites through combined use of nanoparticles and electro-optic polymers with dopants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 838–860 Read article
-
Performance Analysis of 3T DRAM Using FinFET Based with Leakage Reduction Techniques at 45 nm Technology
Abstract: The proposed area of research is to reduce the power consumption, leakage voltage, leakage current and leakage power of DRAM while maintaining the competitive performance. The Fin FET approach is used in DRAM for high performance. Fin type field effect transistors (Fin FET) are capable substitutes for bulk CMOS at the nano-scale. Fin FET are double gate device. A Fin FET uses an intrinsic body. It greatly suppresses the device-performance …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 3, 2017 · pp. 28–34 Read article
-
Performance Analysis of 3T DRAM Using FinFET Based with Leakage Reduction Techniques at 45 nm Technology
Abstract: The proposed area of research is to reduce the power consumption, leakage voltage, leakage current and leakage power of DRAM while maintaining the competitive performance. The Fin FET approach is used in DRAM for high performance. Fin type field effect transistors (Fin FET) are capable substitutes for bulk CMOS at the nano-scale. Fin FET are double gate device. A Fin FET uses an intrinsic body. It greatly suppresses the device-performance …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 2, 2017 · pp. 28–34 Read article
-
Engineering Novel Blue Emissive Thiazolidinedione (TD) Poly Lactic Acid (PLA) Composite Thin Films for Bioplastic Scintillation
Abstract: In this article, we demonstrate luminescent properties of PLA blended with new 3-[2-(4-methylphenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione and 3-[2-(4-chlorophenyl)-2-oxoethyl]-5-(thiophen-2-ylmethylidene)-1, 3-thiazolidine-2, 4-dione (TD). This paper mainly aims at the preparation of intercalated thin films of PLA and TD. The formation of matrix-dopant composite films was confirmed by FTIR, SEM, TGA, DSC and XRD characterizations. This work really stands out from our previous work as TD has been better recognized as drug material in …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 10–23 Read article
-
Role of Reinforcement Learning in Improvement of Semiconductor Doping
Abstract: The semiconductor industry faces increasing challenges in achieving optimal doping profiles as device dimensions shrink and performance requirements intensify. Traditional doping optimization methods, while effective, often struggle with the complex, multi-dimensional parameter spaces characteristic of modern semiconductor manufacturing. This study explores the transformative role of reinforcement learning (RL) in improving semiconductor doping processes, examining how RL algorithms can autonomously optimize doping parameters to enhance device performance, reduce manufacturing costs, and …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 2, 2025 · pp. 23–34 Read article
-
Compositional and Morphological Properties of Nickel and Manganese Doped ZnO Nano Thin Films Grown by Silar Method
Abstract: The composition and morphology of pristine, Ni, Mn and Ni and Mn doped ZnO are discussed in this paper. These ZnO thin film nanostructures were prepared by SILAR method. The deposition conditions have been optimized based on their structure and on the formation of smoothness, adherence and stoichiometry. The results of studies by EDS attached with, scanning electron microscopy (SEM), reveal the varieties of microstructural and morphological modifications feasible with …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 3, 2015 · pp. 48–59 Read article
-
Synthesis, Properties, Nanocomposites, and Electrochemical Applications of Polyaniline: A Review
Abstract: Polyaniline, also known as PANI, is a polymer in the that is becoming more significant for academics in the field of nanotechnology due to the potential uses it has in sensor technologies, optoelectronics, and photonics. PANI can be rapidly doped by a broad range of acids and dopants due to the ease with which it may be manufactured and its exceptional resilience in the natural environment. In this article, we …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 13–20 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article