Search
163 articles for “absorption system”
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
Animal Gastrointestinal Tract in Animals Health
Abstract: The gastrointestinal tract's (GIT) functionality and health are essential elements that influence animal productivity. Since the management of GIT growth and health involves numerous complicated systems, it is critical to have a better understanding of these interconnections in order to create strategies for modulating GIT functioning and health in the perspective of better animal performance. Within in the animal scientific community, this term of "gut health" has sparked considerable interest. …
Published in International Journal of Animal Biotechnology and Applications Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
Polymer Chemistry in Shoulder Orthotics
Abstract: The design of effective shoulder orthotic devices has increasingly made use of polymeric materials because of their versatility, durability, and biocompatibility. This review illustrates polymer chemistry role in constructing an orthotic device for shoulder subluxation, which is a commonly occurring post stroke or injury condition. Proprietary design elements such as polypropylene are rigid yet moldable which help in anatomical formulating for joint stabilization. On the other hand, rubber elastomers, medicinal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 21–28 Read article
-
Chlorophyll-Mimicking Ti₃C₂Tₓ MXene-Conjugated Polymer Nanocomposites: Nature-Inspired Exciton Funneling Architecture for Ultrahigh Photon-to-Electron Conversion in Organic Solar Cells
Abstract: Green plant photosynthetic machinery is one of the most efficient natural systems for harvesting solar energy and converting it into useable electronic charge. Specifically, chlorophyll molecules in the Light-Harvesting Complex II (LHC-II) achieve nearly unity quantum yield via a well-organized Förster Resonance Energy Transfer (FRET) mechanism that enables excitons to migrate towards reaction centers. This study presents a bio-inspired nanocomposite architecture using two-dimensional Ti₃C₂Tₓ MXene nanosheets functionalized with chlorophyll-mimicking porphyrin …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 114–130 Read article
-
Design and Analysis of a Low Loss Polarization Maintaining Waveguide for Transmission of THz Waves
Abstract: AbstractThis paper presents the design of a novel porous core kagome lattice photonic crystal fiber (PCF) which acts as a low loss and polarization maintaining teraheartz (THz) waveguide. Using finite element method (FEM), properties of the proposed PCF are simulated in details including the effective material loss (EML), confinement loss, single mode propagation. Cyclic olefin copolymer, also known as TOPAS material have been chosen for the air micro structured inhibited …
Published in Trends in Opto-electro & Optical Communication · Vol. 6, Issue 3, 2016 · pp. 13–22 Read article
-
Bismuth-Doped CuGaS₂ Thin Films for Enhanced Photovoltaic and Electrocatalytic Performance
Abstract: This study presents the development and application of bismuth (Bi)-doped CuGaS₂ thin films for enhanced performance in photovoltaic and electrocatalytic systems. Using a cost-effective all-solution processing method, Bi-doped CuGaS₂ chalcopyrite nanocrystals were synthesized and spray-deposited onto molybdenum substrates. The resulting films, with a thickness of approximately 730 nm and grain sizes larger than 400 nm, exhibited superior optical properties and a lower band gap compared to undoped films, making them …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 01–07 Read article
-
A Systematic Review of the Herbal Medicinal Plants With Anti-Obesity Potential
Abstract: Obesity is a chronic, multifactorial metabolic condition characterized by abnormal fat accumulation. It is mainly driven by the intricate influence of genetic, environmental, hormonal, metabolic and lifestyle determinants. The burden of obesity has risen considerably over the past few years, making it one of the major health concerns in both developed and developing countries alike. The rapid increase globally in obesity prevalence is linked with numerous health complications such as …
Published in Research & Reviews : Journal of Herbal Science · Vol. 15, Issue 2, 2026 · pp. 31–38 Read article
-
Structure–Property Correlation of Infill Topology and Density on Tensile and Flexural Performance of FDM-Printed PLA and ABS
Abstract: Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has become a widely adopted manufacturing technology due to its design flexibility, low cost, and capability for rapid prototyping. However, the mechanical performance of FDM-printed components is strongly influenced by internal structural parameters such as infill pattern and infill density, in addition to the intrinsic material behaviour. This study investigates the structure–property relationship between infill topology, density, and mechanical performance of PLA …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 26–37 Read article
-
Exploring the Dynamics of Eye Fluid: Lymphatics, Aqueous Humor, and Intraocular Pressure
Abstract: Lymphatic vessels are essential for regulating interstitial fluid balance, facilitating immune cell transport, supporting lipid absorption, and playing significant roles in tumor development and metastasis. Recent findings have expanded their recognized functions, particularly in pathological contexts. One notable discovery is the involvement of lymphatics in draining aqueous humor from the eye, a process closely linked to the regulation of intraocular pressure (IOP) and its implications for glaucoma progression. This review …
Published in Emerging Trends in Personalized Medicines · Vol. 2, Issue 2, 2025 · pp. 31–44 Read article
-
Recent Advances in Crystal Defect Engineering of Semiconductor Photocatalysts for Sustainable Environmental and Energy Applications
Abstract: Semiconductor photocatalysis has emerged as one of the most promising green technologies for addressing environmental pollution and global energy challenges through solar energy utilization. Nevertheless, the practical application of conventional semiconductor photocatalysts is often limited by their narrow visible-light absorption, rapid recombination of photogenerated electron–hole pairs, insufficient active sites, and poor charge-transfer efficiency. Defect engineering has recently attracted significant attention as an effective strategy to overcome these limitations by deliberately …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 4, Issue 2, 2026 Read article
-
Dynamic Behavior of Asphalt Stabilized and Grid Reinforced Subgrade Soil
Abstract: The impact of repeated loading (punching shear) on Asphalt stabilized and grid reinforced subgrade soil have been investigated in this study. Specimens of 152mm diameter and 116 mm in height have been prepared, cured, and then tested using the pneumatic repeated load system PRLS. The deformation-load repetitions data were recorded for each case. Data were fed to the finite element software for the modeling process. An assessment was conducted to …
Published in Trends in Transport Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 1–9 Read article
-
Exploring Molecular Spectroscopy: Insights into Chemical Structures and Interactions
Abstract: A key tool for understanding the dynamics, structure, and interactions of molecules is molecular spectroscopy. This abstract outlines the key principles and techniques employed in modern molecular spectroscopy, highlighting its significance in various scientific disciplines. The focus is on the principles of absorption, emission, and scattering of electromagnetic radiation by molecules, leading to valuable insights into molecular properties. The abstract begins by discussing the basic principles of molecular spectroscopy, emphasizing …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 1, 2023 · pp. 11–16 Read article
-
Green Synthesis of Copper Nanoparticle for the Treatment of Neurodegenerative Disease
Abstract: The study of ecologically friendly CuNP synthesis is a growing area with potential applications in biomedical research and environmental remediation, as well as sustainable nanotechnology. Generally, reducing, and stabilizing agents such as microbes, plant extracts, or other natural sources are used. The green synthesis methodology guarantees the production of nanoparticles with desired characteristics for biomedical applications while simultaneously mitigating the environmental effect that comes with conventional chemical processes. CuNPs possess …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 1, 2024 · pp. 13–24 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
Thermal and Morphological Characterization of Rice Starch–Charcoal Composites for Eco-Friendly Engineering Applications
Abstract: This work focuses on the development and evaluation of rice starch–charcoal–based composite materials to overcome the limitations of natural composites with low thermal properties. In order to examine the impact of filler concentration on thermal and structural performance, eight composite specimens were created by altering the ratios of rice starch and charcoal. TGA, DTA, AFM, SEM, and measurements of thermal conductivity and effusivity were used to thoroughly characterize the composites. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1286–1297 Read article
-
The Utilization of Oil Entrapped Floating Alginate Beads in a Gastroretentive Delivery System is Intended to Improve the Bioavailbility of Telmisartan Incorporating Principles of Bioinformatics
Abstract: Oil entrapped floating calcium alginate beads of Telmisartan were successfully prepared using sodium alginate as polymer and two different oil phases of mineral oil and olive oil by emulsion gelation method. The FT-IR spectra of final optimized formulation confirms no drug- polymer incompatibility. The floating time of beads was found to be more than 12 hrs suggesting that the method used for prepration was effective. The floating time of optimized …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 11, Issue 1, 2024 · pp. 21–38 Read article
-
Role of Nutool (Irrigation) in the Management of Shaqeeqa (Migraine): A Review
Abstract: In Unani system of medicine, Shaqeeqa is a familiar disorder, it is not a modern entity, and it is described since ancient time. Many eminent Unani physician like as Jalinoos, Ibn-sina, and Razi described its etiology, prevention and treatment. Shaqeeqa is characterized by recurrent attacks of pulsatile headache usually unilateral wildly variable in intensity, frequency and duration. Its cause involves morbid vapors and humoral imbalance. Alteration in Asbab-esitta Zarooriya leads …
Published in Research & Reviews : A Journal of Unani, Siddha and Homeopathy · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
An Experimental Study on the Fabrication and Mechanical Properties of Natural Fiber Reinforced Polymer Hybrid Composites
Abstract: Natural fiber-reinforced polymer composites are increasingly investigated as lower-impact alternatives to conventional synthetic fiber systems. This work fabricated and mechanically characterized a sisal-coconut coir fiber-reinforced epoxy hybrid composite and compared its performance with a glass fiber-reinforced polymer (GFRP) epoxy composite under the reported laboratory conditions. The hybrid reinforcement contained 75% sisal fiber and 25% coconut coir fiber and was incorporated into an epoxy LY556/HY951 matrix by the hand lay-up technique. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article