Search
1214 articles for “ASP”
-
Synthesis and Characterization of Triethanolamine Derivative of Sodium Dodecy l Sulphate and its Use in Enhanced Oil Recovery
Abstract: The paper deals with the synthesis and characterization of a new surfactant and its use in Alkali-Surfactant- Polymer (ASP) flooding in enhanced oil recovery (EOR). The material has been synthesized from sodium dodecyl sulphate and triethanolamine. The synthesized surfactant has been characterized by measuring the surface tension of its aqueous solution and it has been found that the surface tension of derivative surfactant is much lower than that of pure …
Published in Journal of Petroleum Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 37–45 Read article
-
Resilient Characteristics of Modified Subgrade Soil
Abstract: AbstractThe problems with poor subgrade soil which is considered as the foundation for the flexible pavement regarding the deformation under load repetitions is a major concern for road engineers. The Poor subgrade soil may be improved by stabilization or implication of soil reinforcements. In this work, the pneumatic repeated loading testing techniques has been implemented for assessing the influence of both techniques on the resilient characteristics of subgrade soil. Cutback …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 28–37 Read article
-
CBD: Wonder Drug of the Future
Abstract: The traditional “wonder drug” in pharmacology is aspirin, well known for its properties of pain control, lowering elevated body temperature, fighting inflammation, and decreasing blood coagulation. Aspirin, as a non-steroidal anti-inflammatory drug (NSAID) is a preventative drug as well as a therapeutic one. The Framingham heart study has concluded that a low dose aspirin regimen (81 mg/day) will help prevent cardiovascular disease and stroke. On the other hand, CBD (cannabidiol) …
Published in Research and Reviews: A Journal of Neuroscience · Vol. 7, Issue 1, 2017 · pp. 1–5 Read article
-
Diagnostic Algorithm of Multidetector Computed Tomography (MDCT) for Healthy Lungs to Detect Variations of Morphologic Index
Abstract: Introduction: Diagnostic algorithm of Multidetector Computed Tomography (MDCT) was established to make qualitative diagnosis with four types of shadows-increased Lung Attenuation, Decreased Lung Attenuation, Linear Pattern, Nodular Pattern and the nodular pattern is also used for qualitative assessment by being further classified as round, lobulated, polygonal, tentacular, spiculated, ragged and irregular pattern. Method: To establish the new diagnostic algorithm using MDCT result indicators, we selected morphologic indices to used CAD …
Published in Research and Reviews : Journal of Surgery · Vol. 11, Issue 1, 2022 · pp. 30–33 Read article
-
Development and Evaluation of Medicated Mouth Wash
Abstract: The present invention is to formulate and evaluate a novel medicated mouth rinse using Achyranthes aspera extract in an oil-based formulation. The herb Achyranthes aspera, which has long been used for medicinal purposes, was chosen because of its purported anti-inflammatory and antibacterial qualities. This study aimed to create a safe, effective, and pleasant-tasting mouth rinse to maintain oral hygiene and address common oral health issues. Achyranthes aspera’s bioactive components were …
Published in Research & Reviews : Journal of Herbal Science · Vol. 15, Issue 1, 2026 · pp. 21–30 Read article
-
Binary Distillation Design and Control
Abstract: This paper discusses design and control strategies of binary distillation process using ASPEN PLUS V8.8 simulating tool. Steady state design procedure for binary distillation column design to separate acrolein and propylene is explained. Dynamic simulations were conducted by designing control structure. The developed control structure contains level controllers, pressure controllers and temperature controllers. The developed control structure has shown good performance in withstanding the various process disturbances.
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 3, 2016 · pp. 19–25 Read article
-
Waste Minimization in Cumene Production Process
Abstract: This study deals with waste minimization in cumene production process using WAR (Waste Reduction Algorithm). Initially cumene production process is designed using ASPEN PLUS V8.8 chemical process simulator. Using WAR algorithm PEI’s (Potential Environmental Impacts) are calculated. Based on the PEI values process modifications are suggested to minimize the PEI’s. The modified process is eco-friendly by reducing the waste by 29.9%.
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 18–22 Read article
-
Process Plant Simulations Using MATLAB
Abstract: This paper explains the systematic procedure to perform steady state process simulations of process plants using MATLAB. This procedure is illustrated with ethylacetate production process. Sequential modular approach is used to solve the material and enthalpy balance calculations in the flowsheet. Phase equilibrium behaviour plots and sensitivity analysis plots are drawn using MATLAB. Results obtained are compared with the ASPEN PLUS V8.8 simulation results.
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 42–48 Read article
-
Design and Control of Ethyl Acetate Production Process
Abstract: In this study, the design and control of ethyl acetate production plant has been investigated. The proposed design consists of a continuous-stirred tank reactor and two distillation columns. Ethanol reacts with acetic acid and gives ethyl acetate and water. Plant-wide operability and control of the entire process plant with decentralized controllers is explained by doing both steady state and dynamic simulations. Tray temperature control loop performance is tested for the …
Published in Emerging Trends in Chemical Engineering · Vol. 2, Issue 1, 2015 · pp. 9–20 Read article
-
Surface-Driven Capillary Flow of AqueousIsopropyl Alcohol in the Sudden Expansion PMMA Microchannels
Abstract: Author has fabricated the PMMA sudden expansion microchannels by the maskless lithography, hot embossing lithography, drilling, direct bonding and chip separation technique. The effect of channel aspect ratio on the surface-driven capillary flow is studied in the sudden expansion microchannels fabricated by PMMA as a polymeric material. Also, the effect of surface wettability on the surface-driven capillary flow is studied in the sudden expansion microchannels fabricated by PMMA. This study …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 1–4 Read article
-
CFD Analysis of Savonius VAWT for Household Application
Abstract: Fossil fuels are depleting at very fast rate and will have shortages in near future. Also, prices of fuelsincrease day-by-day, demands of renewable energy sources increases for electrical power generation.Wind energy is available in nature free of cost and in abundant form, so is an excellent option forgeneration of electric power through wind turbine technology. Rapid increase in global energyrequirement resulted in considerable attention towards renewable energy sources as there …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 18–32 Read article
-
Influence of Combined Stabilization on the Structural Properties of Subgrade Soil
Abstract: Soil stabilization with liquid asphalt is considered as a sustainable step towards roadway construction on problematic subgrade soil, there are no requirements to import good quality materials or to implement energy consumption, but to mix the readily available soil with liquid asphalt through the cold mix technique. In this work, collapsible soil obtained from Nasiriya was mixed with asphalt emulsion, lime, and combinations of lime and asphalt emulsion (combined stabilization) …
Published in Journal of Geotechnical Engineering · Vol. 4, Issue 1, 2017 · pp. 13–24 Read article
-
Comparison Between Theoretical, Analytical and Experimental Vibration Analysis Method and Different Circular Tile Cutter by Using FFT and ANSYS
Abstract: Circular cutters with uniform radial cracks are extensively used in the cutting processes. Unwanted noise, vibration and accidental failure associated with the cutting process have become an important economic and technological problem in the industry. The knowledge of natural frequencies of components is of great interest in the study of response of structures to various excitations. Hence, it is important to study a circular tile cutter with central hole, which …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 31–42 Read article
-
Experimental Studies on the Passive Capillary Flow of Non-aqueous Working Liquids in PMMA Microfluidic Devices of Rectangular Cross-Sections
Abstract: The polymethylmethacrylate (PMMA) microfluidic devices are fabricated by the maskless lithography, hot embossing lithography and direct bonding technique. The effects of liquid viscosity, surface wettability and channel aspect ratio on the surface-driven capillary flow of non-aqueous working liquids are studied in the fabricated PMMA microfluidic devices. The working liquids are ethylene glycol, isopropyl alcohol (IPA) and ethanol. These experimental studies will be useful to manipulate different non-aqueous working liquids inside …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 29–33 Read article
-
Molasses to Ethanol Conversion Processes Overview: Process Simulation of the Beer-Ethanol Distillation
Abstract: The main target of this research is to give an overview of ethanol production and also to investigate the distillation process in a comparative way between the simulation and the lab tests. Different samples at different stages have been measured from the fermentation section to evaluate the ethanol production rate and concentration in each one of the fermenter as well as the PH measurements have been considered over six periods …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 1–16 Read article
-
Oil Cuts Evaluation Obtained by Molecular Distillation from Heavy Petroleum Fractions in the Fluid Catalytic Cracking Process
Abstract: Fluid catalytic cracking (FCC) is a refining process that cracks heavy oil molecules in light fractions, mainly compounds with 3 to 12 carbon atoms. It is composed by a converter, main fractionator and gas plant. In this work FCC was modeled using Aspen HYSYS Cat cracker process simulator aiming to evaluate the true boiling point (TBP) curves of oil cuts obtained by falling film molecular distillation from a Brazilian atmospheric …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 15–34 Read article
-
Driver Drowsiness Detection System Using Python, OpenCV and Raspberry Pi
Abstract: The number of accidents and deaths can be greatly decreased by using intelligent systems to prevent auto accidents. Human mistakes, such as drowsy driving, are one of the variables that significantly contribute to accidents. The system looks for symptoms of fatigue and sleepiness on a person's face while they are driving. It is based on an image processing technique. This project presents a way to analyze and anticipate driver drowsiness …
Published in Trends in Opto-electro & Optical Communication · Vol. 13, Issue 2, 2023 · pp. 6–15 Read article
-
Epidemiology and Clinical Profile of Liver Abscess from a Tertiary Care Hospital in Northern India
Abstract: Background: Liver abscess is defined as a localized collection of supportive material encapsulated within the liver parenchyma due to inflammatory necrosis secondary to bacterial, amoebic, tubercular, or fungal pathogens. Male gender, advanced age liver cirrhosis, proton pump inhibitors low socioeconomic status, alcoholism, diabetes, immunodeficiency states and poor hygiene are few of the risk factors mentioned in literature that are associated with Liver abscess. In the past decade, the treatment protocol …
Published in Research and Reviews : Journal of Surgery · Vol. 11, Issue 1, 2022 · pp. 1–6 Read article
-
Sulfur recovery process simulation and optimization
Abstract: Objective of this work is to simulate the sulfur recovery process by using the latest version of Aspen HYSYS V10 simulation program. Sulfur recovery model used in the simulation program is Claus three stage process. A total recovery of 97.85% sufur was recovered from the rich acid gas feed. The effects of H2S/SO2 ratio, outlet sulfur dew point margin, catalytic stage temperature, CS2 and COS concentrations, role of catalyst, acid …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 3, 2018 · pp. 32–40 Read article
-
Deformation and Densification Behaviour of Sintered Aluminium Alloy and Chromium Carbide Metal Matrix Preforms
Abstract: This paper presents comprehensive experimental results focused on the deformation and densification behavior of sintered AA2618 - 2% Cr3C2 metal matrix preforms. The study specifically examines preforms with varying aspect ratios subjected to a cold upsetting process. To create the powder preforms, an initial theoretical density of 89% was achieved using a cylindrical die on a 600 kN hydraulic press. The sintering process was conducted in an electric muffle furnace, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 125–131 Read article