Search
1911 articles for “Cu (NO3)2.3H2O” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Study on Thermal and Electrical Performance of Pani Doped Graphene Composites under Solar Light Irradiation
Abstract: Here in the research work focusses on the study of thermal and electrical performance of PANI doped graphene composites fabricated by chemical way. A sequence of conducting polymer oxidative method done using the polymerization of aniline in the presence of graphene was deliberate under solar light irradiation. The composites were inspected and characterized using spectroscopy and microscopy studies. The thermal/ electrical performance of PANI and PANI doped graphene were evaluated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1134–1146 Read article
-
Investigation of the independent and combined roles of Gr and ZrO₂ on strengthening behaviour of Al-7075 Composites
Abstract: This study investigates the effect of individual and hybrid reinforcements on the mechanical and microstructural behaviour of Al7075 composite fabricated using the 2-step stir-casting technique. Four compositions were made with the base Al-7075, Al-7075 3 weight % ZrO2, and Al-7075 3 weight % Gr as well as a hybrid composite Al7075 with 3 wt.% Gr, 3 wt.% ZrO2. 2-step stir-casting was used to increase the wettability of the particles, decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1060–1075 Read article
-
Bone Grafting in Dentistry: From Biological Principles to Contemporary Regenerative Applications
Abstract: Bone grafting plays a pivotal role in contemporary regenerative dentistry by enabling predictable reconstruction of alveolar bone defects resulting from periodontal disease, tooth extraction, trauma, or pathology. Adequate bone volume and quality are essential prerequisites for successful implant placement, periodontal regeneration, and long-term functional and esthetic outcomes. Bone graft materials act as biological or synthetic scaffolds that facilitate new bone formation through the primary mechanisms of osteogenesis, osteoinduction, osteoconduction, and …
Published in Research and Reviews: A Journal of Dentistry · Vol. 17, Issue 1, 2026 · pp. 6–13 Read article
-
Tailoring Toughness of Pineapple Leaf Fiber-Reinforced Epoxy Composites Using Halloysite Nanotubes
Abstract: This comprehensive study investigates the effects of halloysite nanotubes (HNTs) on the impact strength and fracture toughness of pineapple leaf fabric-reinforced epoxy (PALF/Ep) composites with an emphasis on sustainable material development. ASTM D256 and ASTM D5045 standards were followed in the fabrication of the composites. HNT weight percentages were systematically changed from 0 to 3wt% through using solution mixing and manual lay-up techniques, and vacuum bagging was used to obtain …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 261–272 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Optimizing Parameters for Dry Sliding Wear Control in Stir-Cast AA7050/SiC Composites
Abstract: Using a pin-on-disc tribometer, this study examined the dry sliding wear behavior of AA7050/SiC composites. The production of this metal matrix composite was achieved through the stir-casting process, which involved an initial step of melting the AA7050 alloy, followed by the careful introduction of silicon carbide (SiC) particles, stirring to achieve uniform dispersion, and finally, casting the molten mixture. Wear rate (WR) was determined by three operational parameters: SiC reinforcement …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1624–1635 Read article
-
Developing Design Sense in First-Year Architecture Students: A Pedagogical Approach to Basic Design
Abstract: This study explores the pedagogical significance of Basic Design Studios in shaping the foundational competencies of first-year architecture students. Serving as the foundation of architectural education, these studios cultivate essential skills in spatial awareness, creative thinking, and problem-solving. The research underscores how structured studio exercises, material explorations, and conceptual modeling collectively nurture an understanding of the interrelationship between space, form, and function. By emphasizing experiential and hands-on learning, students are …
Published in International Journal of Architectural Design and Planning · Vol. 4, Issue 1, 2026 · pp. 1–6 Read article
-
Unfolding the Awareness for Women and Children in Vidarbha Region
Abstract: The concept of “Roots and Wings” as a pathway to empower women and children in Vidarbha region, focusing on the need for both a strong foundation and the freedom to thrive. “Roots” symbolize support systems like education, cultural identity, and community care, while “wings” represent opportunities for growth, self-expression, and independence. Women in Vidarbha often face deep-rooted challenges, including gender inequality, domestic violence, menstrual health, abuse and a lack of …
Published in International Journal of Trends in Humanities · Vol. 2, Issue 2, 2025 · pp. 39–45 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Study of Thermal Conductivity and Hardness of Coir Fiber Reinforced Epoxy Composite
Abstract: Researchers are drawn to polymer reinforced natural fibers composite for the development of new materials. The research aims to use waste fibers, specifically coir, to create polymer composite materials. Thermal conductivity and hardness of the composite results are determined under various conditions. Coir fiber is used as the reinforcement material and Coir powder is used as the filler material in the study. In the case of the matrix, the epoxy …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1576–1582 Read article
-
Ag₂S–Ag Nanocomposites: A Bottom-Up Approach to Enhance Thermoelectric Power Factor at Near Room Temperature
Abstract: The intrinsic ductility, low toxicity, and naturally occurring abundance of silver sulphide (Ag₂S) have made it a potential thermoelectric material in recent years. However, high electrical resistance severely limits its practical application. Here, we present a thorough analysis of how metallic Ag nanoinclusions affect the structural, electrical, and thermoelectric characteristics of Ag₂S nanocomposites made using a simple bottom-up polyol approach. (Ag₂S)₁₋ₓAgₓ nanocomposites with an Ag content ranging from 0 to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 40–55 Read article
-
Body Weight Patterns and Lifestyle Behaviors Among Male College Students in Kangra District, Himachal Pradesh: A Cross-Sectional Study
Abstract: Abnormal body weight in young adults is a major public-health concern, particularly in low- and middle-income settings where undernutrition and excess weight may coexist. The college period often involves changes in diet, physical activity, sedentary behavior, and sleep, all of which influence nutritional status and future disease risk. This study assessed the prevalence of underweight and overweight/obesity among college-aged male students in Kangra District, Himachal Pradesh, India, and examined the …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 16, Issue 1, 2026 · pp. 31–38 Read article
-
IoT-Based Power Monitoring System
Abstract: Today, in many smart systems, IOT plays an important role. It is mostly used in power monitoring, Household applications, and also in industrial applications. In that, power is the most important thing that is to be monitored, controlled and properly utilized. In this paper, a system is designed for monitor and control the street lights of particular area. With the help of LDR, power consumption is possible. Customers and system …
Published in Journal of Power Electronics and Power Systems · Vol. 16, Issue 1, 2026 · pp. 16–24 Read article
-
The Impact of Using High-Resolution Satellite Images on Improving Geographic Maps
Abstract: By integrating high-resolution satellite images into pre-existing mapping frameworks, this study tackles the problem of guaranteeing correctness and dependability in geospatial data updates. The main goal is to assess which satellite imagery sources—SuperView, Ikonos, QuickBird, and WorldView—are appropriate for updating maps at 1:2500 and 1:5000 scales. The process entails evaluating radiometric quality, geometric dependability, spatial correctness, and picture resolution and comparing the results to the specifications of different mapping tasks. …
Published in Journal of Remote Sensing & GIS · Vol. 17, Issue 1, 2026 Read article
-
Particle Swarm Optimization Framework for Accurate Battery State-of-Charge and Remaining Useful Life Estimation
Abstract: Accurate estimation of the State of Charge (SOC) and State of Health (SOH) of a battery is key to safe and efficient management of batteries in electric vehicles and energy-storage systems. However, it is challenging due to high nonlinearity, varying operating conditions, measurement noise, and limited access to comprehensive electrochemical parameters. Traditional data-driven models often generalize poorly and require heavy tuning, which can produce unstable predictions. To address these problems, …
Published in Journal of Automobile Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 53–64 Read article
-
Review of Battery Management System and SOC
Abstract: The perception of electric cars (EVs) as a strong alternative to for internal combustion engine automobiles is growing. For electric vehicle (EV) technologies to advance, they must develop quickly, especially in the area of battery technology. light weight, increased energy capacity, quick charging times, lithium-ion (Li-ion) batteries are generally used for electric vehicles (EVs). The efficiency of the battery management system (BMS) and battery performance are critical elements influencing electric …
Published in Journal of VLSI Design Tools and Technology · Vol. 16, Issue 1, 2026 · pp. 08–16 Read article
-
Design and Implementation of an Arduino-Based Wireless Power Consumption Monitoring and Control System
Abstract: The increasing demand for electricity and the inefficiencies associated with traditional metering systems necessitate the development of advanced solutions for monitoring and controlling power consumption. This study presents the design and implementation of an Arduino-based wireless power consumption monitoring and control system aimed at providing real-time feedback and efficient energy management. The system incorporates the Arduino Uno R3 microcontroller, ACS712 current sensor, relay module, and Ethernet shield to enable accurate …
Published in Trends in Electrical Engineering · Vol. 16, Issue 1, 2025 · pp. 19–31 Read article
-
Predictive Maintenance in Semiconductor Systems: Insights from Machine Intelligence and Data-Driven Methods
Abstract: With the fast-paced development of semiconductor technology comes the need to focus on device reliability, or how long devices will function and the likelihood of devices having operational issues. Predicting failures and avoiding downtime with the implementation of timely, actionable, and data-driven maintenance strategies are essential to insure devices function sustainably within predetermined performance levels. The implementation of predictive maintenance within artificial intelligence and machine learning technologies will provide the …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 1, 2026 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article