Search
175 articles for “electrical measurements”
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Keyless Lock Based on Internet of Things
Abstract: In recent years, there has been a growing interest in smart home technologies, with smart door locks being one of the focal points due to their potential to enhance security and convenience. Smart door lock systems are transforming access control by offering a keyless alternative for both residential and commercial settings. These electronic locks replace traditional keys with secure methods such as emergency alarms, privacy modes, battery backup, cameras, voice …
Published in Journal Of Network security · Vol. 12, Issue 2, 2024 · pp. 18–21 Read article
-
Enhanced Efficiency in Electric Vehicles: Gyroscopic Sensor for Power Optimization
Abstract: This research focuses on the design and production of a smart electric vehicle that uses a controlled gyroscopic sensor and microcontroller to automatically transfer power from the internal system to the wheels and vice versa. The era of electric vehicles has only recently begun, but it will significantly expand the automobile industry to the point where modern fossil fuel vehicles will eventually become outdated. The fact that they are environmentally …
Published in International Journal of Optical Innovations & Research · Vol. 2, Issue 1, 2024 · pp. 32–40 Read article
-
Metro Systems' Role in Reducing CO2 Emissions in Urban Transport
Abstract: To better understand the impact of metro systems on reducing CO2 emissions in urban transport, a detailed analysis is required. This analysis should evaluate both the direct and broader effects of metro networks on the overall urban transportation system. It is crucial to quantify the actual contribution of metro systems in cutting CO2 emissions by considering the entire transport network. The evaluation should include not only the emissions generated by …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 3, 2024 · pp. 19–22 Read article
-
Policies on Emissions of Greenhouse Gases and Other Atmospheric Pollutants by the Railway Transport Sector
Abstract: This work seeks to identify, understand, and analyze laws and regulations from different European Union countries that focus on emissions of greenhouse gases and other atmospheric pollutants by the rail transport sector, both freight and passenger. The search to identify legislation was carried out through the use of artificial intelligence and, subsequently, an active search for documents relevant to the topic was carried out. During the research, data on the …
Published in Trends in Transport Engineering and Applications · Vol. 11, Issue 3, 2024 · pp. 14–18 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Keyless: LQ Based On IOT
Abstract: In recent years, there has been a growing interest in smart home technologies, with smart door locks being one of the focal points due to their potential to enhance security and convenience. Smart door lock systems are transforming access control by offering a keyless alternative for both residential and commercial settings. These electronic locks replace traditional keys with secure methods such as emergency alarms, privacy modes, battery backup, cameras, voice …
Published in Journal Of Network security Read article
-
Smart Weather Monitoring Station
Abstract: Climate change and the environment have been in attention lately. Therefore, it is essential to track the real-time weather conditions of one location from a different one. The Internet of Things (IoT) plays a crucial role in measuring these parameters by utilizing sensor networks that cover the surrounding environment. The Internet of Things is the next miracle of the Internet that will change the lifestyle of the people. It extends …
Published in International Journal of Satellite Remote Sensing · Vol. 2, Issue 2, 2024 · pp. 36–44 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
A Strategy of Nano-Calcite Fillers for Enhancing the Mechanical and Thermal Properties of Polypropylene Polymers
Abstract: Particulate polymer composites have gained popularity because of their many uses. For some, using high loadings to achieve desired attributes without compromising the material's mechanical properties or restricting its processability is desirable. It is possible to use surface active agents to improve characteristics and increase solid loading. Interface characteristics in highly packed particulate composites based on nano-calcite (nano-calcium carbonate) and polypropylene as a binder are the focus of the current …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 1, 2025 · pp. 20–29 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Physico-Chemical Assessment of River Benue to Determine Pollution Levels Using Chemometric Models.
Abstract: The effects of pollution on water have been reviewed. This study is aimed at determining the level of pollution of the River Benue, with the view of assessing its use as potable water. Different analytical techniques including titrimetry, gravimetry, potentiometry, and spectrophotometry were used for the study. The total hardness gave (22.28 mg/L and 41.87 mg/L) for dry and rainy season respectively. Electrical conductivity gave (91.35 mg/L and 54.10 mg/L) …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 43–76 Read article
-
Advanced AI based Energy Monitoring and Demand Prediction with Theft Detection
Abstract: This paper presents a study on an AI-based energy management system, which is designed for real-time monitoring of energy consumption for theft detection and energy demand prediction. Our energy management system has voltage and current sensors for energy consumption measurement and provides real- time data on voltage (V), current (mA), and energy units. We have implemented Machine Learning algorithm SVM to improve the process of theft detection by identifying anomalies …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 1, 2026 Read article
-
Machine Learning-Based Quantification of Polymer Structure Property Relationships for Predictive Material Design
Abstract: Polymer structures exhibit complex, hierarchical arrangements that strongly influence macroscopic properties, yet consistent quantification remains challenging due to nonlinear interactions and limited unified modeling strategies. Existing approaches inadequately capture generalized structure–property mappings across diverse polymer systems. This research aims to establish a machine learning-based quantification model for polymer structure–property relationships to support predictive material design. A Polymer Structure Property Dataset of 5,000 polymer samples includes structural descriptors and experimentally measured …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 737–754 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Design of Lead-Free Perovskite (CH3NH3SnX3, X=I) Solar Cell using SCAPS-1D
Abstract: Research on renewable energy conversion technology has accelerated due to the world's growing energy needs. Researchers from all over the world are interested in lead-based perovskite materials. These cells are being developed as a substitute for conventional solar cells (SCs) because they have the potential to increase solar energy conversion efficiency. Lead's advantageous electrical and optical characteristics make it a viable option for photovoltaic and optoelectronic applications. Lead's limited material …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 1, 2025 · pp. 37–43 Read article
-
Supporting Technologies and Techniques for Energy Efficient Smart Home Automation System
Abstract: Information and communication technologies (ICTs), their salient features, and their role in achieving greater energy efficiency in smart buildings are the main topics of this article. considering that the primary focus of the inquiry is electrical energy, which is the most utilized. Energy harvesting and green energy are both discussed in this paper since they both increase energy efficiency by supplying more clean energy. The primary contribution of this study …
Published in Journal of Software Engineering Tools & Technology Trends · Vol. 12, Issue 2, 2025 · pp. 52–58 Read article
-
Microwave Signals: A New Frontier in Non-Invasive Medical Diagnostics: A Study
Abstract: Imagine a future where medical diagnoses are quicker, safer, and more accessible, and where therapies are more precise and less invasive. This future is rapidly approaching, driven in part by the quiet revolution of microwave signals in medicine. Far from their everyday use in ovens and communication, these non-ionizing electromagnetic waves are proving to be powerful tools, offering unprecedented insights into the human body and innovative ways to treat disease. …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 3, 2025 · pp. 27–41 Read article
-
The Green Cost of Generative Ai: Environmental Sustainability Implications of Large-Scale Ai Systems
Abstract: Generative Artificial Intelligence (GenAI) has advanced rapidly in scale and complexity, enabling powerful capabilities in automated content creation, multimodal reasoning and real-time decision support across sectors. While these systems offer significant technological and economic benefits, their environmental implications are not fully examined. Large-scale GenAI models rely on high-performance computing infrastructure that consumes substantial energy and resources throughout their lifecycle, raising critical sustainability concerns. This paper offers a sustainability-oriented assessment of …
Published in International Journal of Sustainability · Vol. 3, Issue 1, 2026 · pp. 12–20 Read article
-
A Physics-Informed Graph Neural Network Framework for Real- Time Thermal-Aware Fault Prediction and Adaptive Power Optimization in Heterogeneous System-on-Chip Architectures
Abstract: Heterogeneous System-on-Chip (SoC) architectures are increasingly adopted in edge computing, artificial intelligence, autonomous systems, and high-performance embedded platforms due to their superior computational efficiency and flexibility. However, increasing integration density and workload diversity introduce severe thermal hotspots, accelerated device degradation, and unexpected hardware faults that adversely affect system reliability and energy efficiency. This study proposes a Physics-Informed Graph Neural Network (PI-GNN) framework for real-time thermal- aware fault prediction and adaptive …
Published in Journal of VLSI Design Tools and Technology · Vol. 16, Issue 2, 2026 Read article