Search
241 articles for “High/ low density”
-
Impact of Sol–Gel Processing on Dielectric and Energy Storage Properties of BaTiO3 Nanoceramics
Abstract: Barium titanate (BaTiO3) is a widely studied ferroelectric material because of its high dielectric permittivity and strong potential for electrostatic energy storage applications. In this study, BaTiO3 nanoceramics were synthesized using a controlled sol–gel processing route to investigate the influence of synthesis conditions on their dielectric relaxation and energy storage performance. The synthesized powders were calcined and subsequently sintered at temperatures ranging from 1100°C to 1300°C. Structural analysis using X-ray …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 2, 2026 · pp. 11–25 Read article
-
High Speed and Low Power Basic Digital Logic Gates, Half-Adder and Full-Adder Using Modified Gate Diffusion Input Technology
Abstract: In this paper, modified gate diffusion input (MGDI) technology has been used for the design and implementation of digital integrated circuits (ICs). In today’s digital world, IC plays a vital role in high-performance computing, communication, and many consumer electronics. IC manufacturing technology has scaled down to smaller device dimensions. This scaling has a great impact on the design of digital ICs. The main objective of the IC manufacturing technology is …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 1, 2018 · pp. 34–42 Read article
-
Radon Estimation in Some Lakes and Fraser River Water of British Columbia, Canada using LR-115 Type II Alpha Track Detector
Abstract: Radon activity levels were measured in the five Lakes and Fraser River water samples collected from different locations of British Columbia in Canada. The purpose of this study was to compare Radon activity levels in all six sources of water. Water was collected in air tight bottles and stored for two weeks before investigation. LR-115 Type II nuclear track detectors of 1.2 cm2 were used for recording radon alpha tracks. …
Published in Research and Reviews: A Journal of Toxicology · Vol. 13, Issue 4, 2023 Read article
-
Performance Improvement of Standalone Solar PV Pumping System Using Supercapacitor
Abstract: Two of the most pressing issues when it comes to rural communities of arid and semi-arid regions are water shortage and unstable grid electricity. Standalone solar photovoltaic (PV) pumping systems have been introduced as a clean, low maintenance alternative to diesel powered pumps, but their performance is limited by intermittent nature of sunlight and limited energy buffering capacity of conventional batteries. The paper is an investigation into the incorporation of …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 54–62 Read article
-
Radon Estimation in Some Lakes and Fraser River Water of British Columbia, Canada using LR-115 Type II Alpha Track Detector
Abstract: Radon activity levels were measured in the five Lakes and Fraser River water samples collected from different locations of British Columbia in Canada. The purpose of this study was to compare Radon activity levels in all six sources of water. Water was collected in air tight bottles and stored for two weeks before investigation. LR-115 Type II nuclear track detectors of 1.2 cm2 were used for recording radon alpha tracks. …
Published in Research and Reviews: A Journal of Toxicology · Vol. 12, Issue 1, 2022 · pp. 1–8 Read article
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fiber volume fraction (VF) on the mechanical properties of the composite needs to be quantified for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 43–57 Read article
-
Morphological Characterization and Evaluation of Twenty Two Mint Germplasm
Abstract: AbstractTwenty two mint germplasm were characterized and evaluated in the Research Field of Department of Horticulture, Bangabandhu Sheikh Mujibur Rahman Agricultural University, Gazipur, during March 2012 to July 2013 with a view to find out suitable variety for commercial cultivation. Results revealed that 17 accessions produced spreading and only 5 produced erect type plant. Canopy diameter was the highest in MP-4 and the lowest in the accession MP-21. Plant height …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 4, Issue 1, 2015 · pp. 4–12 Read article
-
Millimeter Wave Slotted Microstrip Patch Antenna for Next Generation 5G Communication
Abstract: Abstract: In this paper, a printed microstrip patch antenna is analyzed for lower band 5G technology. The proposed printed Microstrip patch antenna has a compressed structure having dimension 20 × 20 × 1.6 mm3 with the conducting ground plane and this antenna is well suited for the use in handheld next generation 5G devices. Modified antenna resonated at lower band of 5G communication technology. In this research work geometry of …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 25–30 Read article
-
Seasonal Variation in the Weibull Parameters from In Situ Measurements and Model: A Case Study in the Bay of Bengal
Abstract: Seasonal variation of wind speed (U10) and its distribution are essential for the design of wind energy converters (WEC). In this study, year-round wind speed observations from a deepwater moored buoy at a location in the Bay of Bengal are used to assess the potential for wind power generation and are used to validate the ERA5 model. Model-U10 distribution is confined to low wind speeds with high occurrence in the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 1, 2024 · pp. 30–40 Read article
-
Energy Storage Properties of hy-BST3/PVDF Nanocomposite for Dielectric Capacitor Application
Abstract: In the present research work, we have synthesized the ferroelectric ceramic Ba0.7 Sr0.3TiO3 (BST3)/PVDF (Polyvinylidene difluoride). Polymer nanocomposites for energy storage applications, designed to synergistically combine the high dielectric permittivity of hydroxylated barium strontium titanate (hy-BST3) with the mechanical flexibility and electroactive properties of poly(vinylidene fluoride) (PVDF). Hydroxylated Barium Strontium Titanate (hy-BST3) has been synthesized using the sol-gel combustion method followed by surface hydroxylation using H2O2 to achieve nanoscale particles …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 908–918 Read article
-
Concrete Compressive Stress-Induced Crack Analysis and the Main Causes of Concrete Cracks in Construction
Abstract: The findings of experimental investigations into the micromechanical behaviour of concrete under various loading scenarios are presented in this work. Concrete specimens with normal and high strengths were examined under uniaxial compression in constrained spaces. Injection of a low melting point alloy was done into the concrete specimens' pores and fissures. To preserve the load-induced stress microcracks and the pictures from the cross sections of the concrete specimens photographed by …
Published in Journal of Experimental & Applied Mechanics · Vol. 13, Issue 2, 2022 · pp. 11–15 Read article
-
Power and Area - Aware Recursive Multiplier Architecture Utilizing Polymer Composites for Neural Network Acceleration
Abstract: Approximate computing is widely applied in error - tolerant systems as an effective technique to enhance circuit performance by deliberately allowing occasional inaccuracies instead of strictly ensuring precise results for every computation. Among the fundamental building blocks of digital systems, multipliers play a crucial role in signal processing, control systems, and machine learning applications; however, they demand significant power, silicon area, and timing resources. Leveraging error - tolerant approximate multipliers …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1320–1337 Read article
-
Mn Doping–Induced Enhancement of Ethanol Gas Sensitivity in CuO/Cu₂O/Cu Composites
Abstract: A composite of CuO/Cu2O/Cu was synthesized by heating cupric acetate up to 600 °C for 2 hours in air. The properties of pure CuO films and CuO/Cu2O/Cu films were compared. Films were fabricated by the doctor blade method. Polyethylene glycol was used as a binder to prepare films. Mn was doped to composite to enhance the gas sensing properties. Compositions of Mn doped samples were confirmed using XRFS. According to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 52–61 Read article
-
Identification of Groundwater Potential Zone of Chhatrapati Sambhajinagar Tehsil Using Remote Sensing and GIS Technique
Abstract: Groundwater is one of the most vital and renewable natural resources, playing a key role in sustaining domestic, agricultural, and industrial activities, particularly in semi-arid regions like Chhatrapati Sambhajinagar tehsil in Maharashtra. The growing population, rising water demand, and irregular rainfall patterns have resulted in a pressing need to locate potential groundwater zones for sustainable water management. This research employs Remote Sensing (RS) and Geographic Information System (GIS) techniques to …
Published in Journal of Water Resource Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 61–73 Read article
-
Evaluation of Sustainable Waste Materials in Asphalt Paving Mixtures
Abstract: Generating recycled tires, disposable plastic bottles and waste engine oil are important problem in Iraq and there is need to solve it . The waste materials can be considered as an alternative materials in road pavement technology and the using of these materials would be a solution to converse the environment from pollution in one hand and modifying the asphalt paving materials on the other hand. The two waste materials …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 1, 2019 · pp. 12–19 Read article
-
Design and Development of Metallic Isolators for Wedge Lock Mounted Printed Circuit Boards (PCBs)
Abstract: Wedge lock interfaces are preferred for mounting printed circuit boards (PCBs) in electronic packages of air borne vehicles. Merits of this particular mounting configuration are high mounting stiffness, high vibration dissipation and low thermal interface resistance. However, good amount of vibration dissipation occurs only in the close vicinity of wedge locks provided integral to PCBs; because of which electronic components can be mounted only near the wedge locks on PCB. …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 4, Issue 3, 2016 · pp. 27–34 Read article
-
Machine Learning Assisted Optimization of Nanoscale MOSFET Parameters Using TCAD Simulation
Abstract: This paper presents a machine learning (ML) assisted framework for the multi-objective optimization of nanoscale bulk n-channel metal-oxide-semiconductor field-effect transistors (nMOSFETs) with a 10 nm physical gate length, high-k HfO₂ gate dielectric, and TiN metal gate. Technology computer-aided design (TCAD) simulations employing drift-diffusion transport, Shockley-Read-Hall recombination, Lombardi mobility degradation, and density- gradient quantum correction models are used to generate a parametric dataset of 2,400 device configurations spanning gate length (L), …
Published in Journal of Microelectronics and Solid State Devices · Vol. 13, Issue 1, 2026 · pp. 10–19 Read article
-
A Comprehensive Review of Magnesium Matrix Composites (MMCs) and Its Manufacturing Techniques
Abstract: Magnesium matrix composites (MMCs) can overcome the mechanical properties of magnesium alloys by adding reinforcements. These MMCs have properties of hydrogen storage, high specific stiffness and strength, superior dimensional stability, exceptional shock absorption capability, and excellent electromagnetic shielding. No other component can compare with these unique and remarkable capabilities. In recent days, the MMCs have become more attractive in many industries, like aerospace, defense, automotive, electronic packaging and also in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1040–1050 Read article
-
Site Suitability Analysis for Artificial Recharge of Groundwater using GIS and Remote Sensing Techniques: A Study of Mandya District, Karnataka, India
Abstract: The present work is conducted to identify the artificial recharge sites for recharging the groundwater level using GIS and Remote sensing techniques. The scarcity of ground water is keep on increasing day by day due to anthropogenic activities includes decrease in land cover and increase in land use, but the climatic conditions are also severely affected and results in decrease in rainfall and increase in land surface temperature. Most of …
Published in Journal of Water Resource Engineering and Management · Vol. 2, Issue 3, 2015 · pp. 10–22 Read article
-
Thermoacoustic Properties of 1-Propanol-n-Hexane and 1-Propanol-Cyclohexane Binary Mixtures: A Comparative Study at 298.15 K
Abstract: This study reports the measurement of ultrasonic velocity (U), viscosity (η), and density (ρ) for the binary liquid mixtures 1-propanol–n-hexane and 1-propanol–cyclohexane at 298.15 K over the full composition range (mole fraction 0.1–0.9). From the experimentally measured data, several important thermodynamic and acoustic parameters, including isentropic compressibility (βₐ), acoustic impedance, intermolecular free length, free volume (Vf), and internal pressure (πᵢ), were systematically derived to assess the magnitude and nature of …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 19–31 Read article