Search
906 articles for “CO oxidation”
-
Effect of Thickness of Absorber Layer on the Enhancement of Efficiency, and Performance of CH3NH3SnI3 based Perovskite Solar Cell using SCAPS-1D
Abstract: The present research article deals with the improvement of efficiency, and performance of tin based perovskite solar cells (PSCs) using SCAPS-1D software. SCAPS-1D has been used for investigating the absorber layer of the inverted p-i-n arrangement of tin based perovskite solar cells. The inverted p-i-n solar cell arrangement are Glass/ITO/NiO/CH3NH3SnI3/ PCBM/AL where ITO, NiO, CH3NH3SnI3, PCBM and Al are transparent conducting oxide, hole transporting layer (HTL), absorber layer and electron …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 4, 2021 · pp. 1–7 Read article
-
Effect of Annealling on Optical Band Gap of Fe2O3 Thin Films on Amorphos Transparent Glass Substrate by Spray Pyrolysis Method
Abstract: The Fe 2 O 3 thin film has widely used photo-electrochemical cells. In this paper, the optical properties like band gap of thin films is depend on annealed temperature at 100 o C and 200 o C was discussed. The optical property of Fe 2 O 3 are studied by UV- Vis spectroscopy .The optical band gap decreased after increasing annealing temperature. The refractive index of Fe 2 O 3 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 25–29 Read article
-
Synthesis of Polyorthanisidine by Interfacial Polymerization
Abstract: AbstractPolyorthoanisidine has been synthesized by interfacial polymerization method. O-anisidine has been used as a monomer, hydrochloric acid is used as a dopant and ammonium persulphate as an oxidiser. The solvent used for the study is chloroform, isopropanol, hexane and xylene. The polyorthoanisidine obtained is characterized for particle size analysis. It is observed as with xylene as a solvent the least particle size has been observed with Z average value of …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 1–6 Read article
-
Density and Interaction Data for Lutetium-Yttrium Ortho-Aluminate- Based Scintillation Crystals for Gamma-ray Spectroscopy and Imaging
Abstract: The density values of (LupY1-p) AP scintillators based on the results of a literature survey have been found strongly positively linearly correlated to the value of the parameter p, that represents the ratio of lutetium vs. yttrium oxides content by weight. Two cases of serious lack of information have been investigated to search reliable data. Further studies are in progress aimed at inferring possible unknown compositions by using the data …
Published in Journal of Nuclear Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 1–9 Read article
-
Innovative Technology for Water Purification
Abstract: Water purification is critical for ensuring access to clean and safe drinking water, which is essential for public health, environmental sustainability, and economic development. Recent advancements in water purification technologies offer innovative solutions to address the growing challenges of water contamination and scarcity. This paper explores state-of-the-art technologies that are revolutionizing the field of water purification. Key innovations include nanotechnology-based filtration systems, advanced oxidation processes (AOPs), biomimetic membranes, and solar-powered …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 2, 2024 · pp. 11–16 Read article
-
Heat Transfer Augmentation in Twisted Rectangular Channel
Abstract: Abstract The best way to profoundly and scientifically concentrate the heat exchange upgrade of nanofluids under turbulent course through twisted rectangular channels under consistent heat flux conditions on every one of the walls is to look at the marvel numerically. The nanofluids are fundamentally the strong nanoparticle of CuO suspended in water arranged chemically. CFD investigation is led utilizing FLUENT programming by the limited volume technique. The limit conditions connected …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 4, Issue 2, 2017 · pp. 47–55 Read article
-
Heat Transfer Augmentation in Twisted Rectangular Channel
Abstract: The best way to profoundly and scientifically concentrate the heat exchange upgrade of nanofluids under turbulent course through Twisted Rectangular channels under consistent heat flux conditions on every one of the walls is to look at the marvel numerically. The nanofluids are fundamentally the strong nanoparticle of CuO suspended in water arranged chemically. CFD investigation is led utilizing FLUENT programming by the limited volume technique. The limit conditions connected are …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 2, 2020 · pp. 8–17 Read article
-
High Speed and Low Power Basic Digital Logic Gates, Half-Adder and Full-Adder Using Modified Gate Diffusion Input Technology
Abstract: In this paper, modified gate diffusion input (MGDI) technology has been used for the design and implementation of digital integrated circuits (ICs). In today’s digital world, IC plays a vital role in high-performance computing, communication, and many consumer electronics. IC manufacturing technology has scaled down to smaller device dimensions. This scaling has a great impact on the design of digital ICs. The main objective of the IC manufacturing technology is …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 1, 2018 · pp. 34–42 Read article
-
A technical review and analysis of Surface Plasmon Resonance based Optical Fibre Sensors for exploiting oxides materials
Abstract: The review focuses on the most important contributions of oxides materials in the field of surface plasmon resonance in modern years. Surface plasmon resonance (SPR) based fiber optic sensor with indium oxide (In2O3) layer covered on the center of the optical fiber is displayed and theoretical examined. The sensitivity of the SPR based fiber optic sensor has been also assessed numerically. Itis indicated that the proposed SPR based fiber optic …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 1, 2020 · pp. 1–5 Read article
-
Metal Foam by Powder Metallurgy Routes: A Review Paper
Abstract: The aim of study is to evaluate and optimize the process parameters and several control factors of foaming because of their physical and mechanical properties such as, high stiffness, high compressive strength, and good energy absorption. Powder metallurgy is a method in which aluminum and aluminum alloy are mixed with TiH2 or other blowing agents for foam making process. Powder mixed is consolidated to obtain a high dense foam compact …
Published in Journal of Production Research & Management · Vol. 6, Issue 1, 2016 · pp. 9–15 Read article
-
Performance of Concrete in Chemically Aggressive Environment by Using Cementitious Materials in Concrete
Abstract: This study investigates the performance and durability of sustainable concrete incorporating industrial and agricultural waste materials specifically Fly Ash, nano silica and Graphene Oxide when subjected to chemically aggressive environments. Traditional Ordinary Portland Cement (OPC) concrete often suffers from micro-structural degradation, sulfate attack, and acid penetration in harsh conditions. However, the integration of pozzolanic wastes creates a synergistic effect that densifies the concrete matrix through secondary C-S-H (Calcium Silicate Hydrate) …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 45–51 Read article
-
Study of Mechanical and Thermal Properties of Unsaturated Polyester/CuO Nanocomposites
Abstract: AbstractThe CuO nano particles were synthesized from copper sulfate pentahydrate aqueous solution under the low hydrothermal condition at 80°C. The size of the CuO nanoparticles was calculated from TEM. FTIR spectra confirmed the formation of the CuO nanoparticles. Nanocomposites of unsaturated polyester resin with different loading of nano CuO fillers were prepared by casting method. The mechanical properties of the composites such as tensile behavior, flexural behavior, impact strength and …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 35–42 Read article
-
A Review on Nutritional Benefits of the Black Tea
Abstract: Black tea, a cornerstone of global beverage culture, boasts a fascinating history and captivating journey from plant to cup. Derived from the Camellia sinensis plant, black tea distinguishes itself from its green tea cousin through a unique processing method. Unlike green tea, which undergoes minimal processing to preserve its fresh character, black tea undergoes full fermentation. This controlled oxidation process unlocks a deeper layer of flavor and aroma, resulting in …
Published in Research & Reviews : Journal of Food Science & Technology · Vol. 13, Issue 1, 2024 · pp. 21–27 Read article
-
Investigation of Forced Convection Heat Transfer Efficiency Using Cuo/Water Nanofluid in A Concentric Tube Heat Exchanger with Helical Coiled Insert
Abstract: An apparatus that uses nanofluid to transport heat is called a heat exchanger. This uses a nanofluid as the working fluid. One can make nanofluid hanging nanoparticles in liquids such as petroleum products, water, oil, ethylene glycol, fluorocarbons, etc. Forced convection heat transfer using CuO/water as a Nanofluid and distilled water as the base fluid has been examined in a concentric tube heat exchanger with helical coiled insert. Tests on …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 27–41 Read article
-
Performance Improvement of Nano Field Effect Transistor Based on Zinc Oxide Semiconducting Materials – a Critical Analysis
Abstract: New semiconductor materials and new shapes for contemporary nanostructured semiconductor devices, like nanowires, have been researched as a result of advancements in transistor technology. Because of their unique electrical, photonic, and sensing capabilities, nanowires (NWs) constructed of various semiconductor material systems (gallium arsenide, zinc oxide, etc.) have been the subject of intense research over the past 20 years. Due to its distinctive properties, including high electron mobility, high crystalline quality, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 99–107 Read article
-
Enhancement of anticorrosion performance on aluminium substrate by novel nanocomposites of PANI/Bi2O3.CO.ZnO/CNT
Abstract: PANI/Bi2O3.CO.ZnO nanocomposites were prepared in presence of bismuth cobalt oxide nanoparticles at 25oC using ammonium persulphate as an oxidant in an in situ polymerisation with aqueous solution of camphor sulphonic acid (SDBS). These nanocomposites were characterized by XRD, FTIR, TEM, UV and SEM. The performance of PANI, PANI/Bi2O3.CO.ZnO nanocomposites and PANI/Bi2O3.CO.ZnO/CNT nanocomposites as anticorrosion protective coating on Al in 0.5 M HNO3 was studied by using potentiodynamic polymerisation technique and …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 31–41 Read article
-
Exploring the properties and extraction of neem leaves
Abstract: Neem (Azadirachta indica) is a versatile medicinal plant, for its diverse therapeutic properties. This abstract provides a comprehensive overview of recent research focusing on phytochemical analysis, biochemical characterization, and antimicrobial susceptibility testing of Neem extracts. Utilizing the different from of chemical used in it, phytochemical analysis identified a plethora of secondary metabolites within Neem, including alkaloids, flavonoids, terpenoids, steroids, saponin, tannins, quinone, and phenolic compounds, indicative of its complex chemical …
Published in International Journal of Toxins and Toxics · Vol. 1, Issue 2, 2024 · pp. 32–39 Read article
-
Synergistic Reinforcement of Graphene Oxide-polyvinyl Alcohol Bionanocomposite to Enhance Mechanical Performance
Abstract: Due to excessive depletion of natural sources, it is mandatory to exploit biopolymer nanocomposites to get rid of hazardous environmental issues. In this work, GO is used as nanofiller reinforcement in PVA matrix which has been fabricated via solution casting methodology (a biomimetic approach). The results showed that a small amount of graphene oxide content could enhance the mechanical as well as thermal properties of PVA-GO nanocomposites. At 1.5% GO …
Published in Research & Reviews : Journal of Physics · Vol. 8, Issue 3, 2019 · pp. 20–26 Read article
-
Understanding the Dynamics of Biogenic and Anthropogenic Aerosols in the Atmosphere
Abstract: This study explores the complex interactions between marine aerosols, biogenic organic matter, and anthropogenic pollutants, highlighting their implications for climate and air quality. It is established that submicron-sized marine aerosols, primarily of biogenic origin, play a crucial role in cloud condensation nuclei (CCN) concentration, particularly during periods of high biological oceanic activity (HBA). The chemical composition of marine aerosols is significantly influenced by the ocean's annual biological cycle, with seasonal …
Published in International Journal of Atmosphere · Vol. 1, Issue 1, 2024 · pp. 15–22 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article