Search
918 articles for “neutral-axis strain gradient”
Nothing matched all of your words, so these match any of them.
-
A Review on an Investigation on the Effect of Immersed Medium in Friction Stir Welding of Aluminium Alloys (AA 6061-T6)
Abstract: Friction stir welding is solid state welding technology used for welding of low melting point metals such as Al, Mg and its alloys. FSW process can be controlled by different parameters like rotational speed, feed rate and welding medium. In this process, a cylindrical non-consumable tool, with a profiled probe (pin) rotating about its own axis is slowly plunged into the abutting edges of work pieces rigidly clamped to a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 1, 2017 · pp. 9–16 Read article
-
Structure and Cube Texture Development Trend of Al4.5MgMn Alloy at Variable Annealing Conditions
Abstract: Hot-rolled Al4.5MgMn alloy was cold rolled to true strain levels 0.8, 1.6 and 2.3. Annealing at 300°C, 350°C and 400 °C was done to develop annealing structure. The annealed structures were measured by SEM-EBSD. The average grain size and grain size distributions were measured using Sigma-scan-Pro 5 structure analysis software. The average grain size and grain size distributions showed higher number frequency of lower annealing grain size with the increase …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 32–38 Read article
-
Effects of Composition on Structure & Mechanical Property of TiAl Based Intermetallic Compounds
Abstract: The effects of Al content and ternary additions such as Mo, V and Si in as cast g based alloys made by plasma arc melting on solidification structures and mechanical properties were studied. The Columnar g /a2 lamellar structures in Al-lean alloys due to primary a solidification had higher room temperature fracture strength and strain than g phase structures through the reaction of L + a = g in Al-rich …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 3, 2021 · pp. 1–10 Read article
-
Review of Subsea Pipeline for Minimizing Thermal and Pressure Expansion
Abstract: As the offshore oil and gas fields have been exploited in deeper water, subsea pipelines are required to operate at high temperatures and pressures. It causes subsea pipelines to be more subject to movements both in lateral and axial directions due to the loads produced by high temperatures and pressures. Some high temperature pipelines have experienced the cumulative axial displacement of an overall pipeline length over a number of start-up/shut-in …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 10–22 Read article
-
Study of Diagonal Ties and Metal Plate as a Confining Reinforcement for RCC Short Columns
Abstract: Column is a most important structural member in the structural system. Even after the strong column weak beam theory used in the design of the structural member it has been observed that the many times structure collapsed due to the failure of the column. There are many reasons of the column failure but out of that major reason of the failure is ineffective confinement of the column specimen and uneven …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 39–46 Read article
-
Structural and Thermal Analysis of LPG Gas Stove
Abstract: In this manuscript, various analyses were performed such as the structural and thermal using Fusion 360 software. I designed the model of an LPG Gas Stove to perform the analyses. Firstly, I have done the structural analysis to know the effects of loads on the physical structure of my model and its components, it is performed to know the maximum loads that the model can with stand. And obtained the …
Published in Trends in Machine design · Vol. 8, Issue 3, 2021 · pp. 21–31 Read article
-
Lattice Parameter and Grain Size of Hydroxyl apatite of Enamel that Exposured by Sunti Acid (Averrhoa bilimbi l)
Abstract: The structure of Hydroxyl apatite (HA) were changed by acid exposure both in the core and crystal wall in 180 min. Sunti acid (Averrhoa bilimbi l) is one of the most popular traditional foods in Aceh that has a pH 2.1 that could improve the structure of HA. Nanostructure change of the HA ultimately affect the strength and macro structure of tooth enamel. The objective of this study is to …
Published in Research and Reviews: A Journal of Dentistry · Vol. 2, Issue 1-3, 2011 · pp. 39–44 Read article
-
Characterization of Cellulose Producing Bacterial Isolates from Rotten Fruits
Abstract: Cellulose, the most abundant natural polymer, is predominantly sourced from plant wood but can also be synthesized by certain bacteria in the form of bio-cellulose. The potential applications of bio-cellulose are extensive, particularly in the biomedical field for tissue engineering, drug delivery, and more. The distinct properties and purity of bacterial cellulose, in contrast to plant-derived cellulose, underscore its importance and drive further research in the area. This study focuses …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 1, 2024 · pp. 38–45 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
Investigations Into the Potential for Anthracene Decomposition of Novel Soil Bacterium, Pseudomonas putida P7
Abstract: Bioremediation of hazardous contaminants holds immense importance for the preservation of a clean and healthy environment. Conversely, the accumulation of toxicants can be mitigated with the assistance of microorganisms capable of breaking down these harmful substances into benign molecules. Anthracene is frequently used as a model molecule for studies on PAH pollution because it is found in many carcinogenic PAHs. Therefore, the hunt for new microorganisms with the ability to …
Published in Research and Reviews : A Journal of Biotechnology · Vol. 14, Issue 2, 2024 · pp. 29–44 Read article
-
Temperature-Dependent Viscoelastic Response of Magnetorheological Grease with Varying Particle Shapes
Abstract: This study examines the effect of temperatures on the magnetic and rheological properties of magnetorheological greases (MRGs) comprised of different particle shapes, under oscillatory shear mode test. Two samples were prepared with 70 wt.% flake-shaped electrolytic iron particles (EIP) and spherical carbonyl iron particles (CIP) which dispersed in 30 wt.% lithium-based grease, separately. Respective to magnetic properties test, the vibrating sample magnetometry (VSM) revealed that MRG-EIP exhibited 11.4% higher magnetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 139–147 Read article
-
Numerical Investigation of AA5053 Through Equal Channel Angular Pressing Technique: An Overview
Abstract: Equal channel angular pressing is recognized as the predominant method for bulk severe plastic deformation processing and has been employed for refining the grain structure in numerous metals and alloys. This study utilized finite element analysis to examine the processing of metallic billets through simple shear deformation. For the study, the die channel angle was chosen based on achieving the minimum energy consumption to induce maximum uniform strain. Among the …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 40–47 Read article
-
AI-Driven Prediction of Mechanical and Thermal Properties in Polymer-Based Functionally Graded Composites
Abstract: The proposed architecture of the current paper is an artificial intelligence (AI)-driven model of forecasting mechanical and thermal aspects of polymer-based functionally-graded composites (FGCs). Traditional micromechanical and finite element models, which are practical in homogeneous composites, might not be able to account in nonlinear interaction that is caused by compositional gradient. To overcome the challenge, machine learning (ML) models like artificial neural network (ANN), support vectors regression (SVR), and gradient-boosted …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 70–89 Read article
-
Dissipative Particle Dynamics Simulation Study on the Evolution of Photoinitiated Free Radical Polymerization Crosslinked Networks
Abstract: Gradient polymer materials overcome the limitations of conventional homogeneous polymers by integrating multiple distinct functionalities within a single continuous structure. Although photoinitiated free-radical polymerization offers excellent spatial and temporal control, the underlying microscopic mechanisms governing network evolution under non-uniform light fields remain poorly understood. In this study, a mesoscale dissipative particle dynamics (DPD) model was successfully developed to couple free-radical polymerization kinetics—including initiation, propagation, crosslinking, and termination—with exponential light attenuation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 142–158 Read article
-
Predicting Dielectric Constants of Polymers Using Molecular Structural Descriptors and Explainable Machine Learning: A Data-Driven Approach
Abstract: Accurate prediction of dielectric constants in polymeric materials is fundamental to the rational design of advanced electronic components, energy storage capacitors, flexible substrates, and high-frequency communication circuits. Conventional approaches to identifying suitable polymer dielectrics rely on extensive experimental synthesis and characterisation, which are both time-consuming and resource-intensive. In this work, an explainable machine learning framework is developed to predict the dielectric constant of polymers directly from molecular structural descriptors derived …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 297–304 Read article
-
Non-Homogeneous Effect on Vibration of Visco-Elastic Rectangular Plate Having Parabolically Varying Thickness in Both Directions
Abstract: At present the vibration theory has become significant in every sphere of applied sciences. In the advance time, the plates of variable thickness are widely used in civil, aeronautical, mechanical, electronics and marine structures like jet engines designing, space crafts, gas turbines, nuclear power projects etc. The effect of variation of non-homogeneity on vibration of visco-elastic rectangular plate with parabolically varying thickness in both directions is presented in this paper. …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 31–45 Read article
-
Drilling Effect on Fiber Composites: A Review
Abstract: Composites laminates show immense mechanical properties like strength-to-weight ratio, damage tolerance, fatigue and corrosion resistance therefore conventional materials are replaced by composites in many areas such as automobile and aircraft structure. Machining of composites is very difficult than machining of a conventional material because composites are inhomogeneous and extremely abrasive. In production drilling is important machining process used to produce hole for riveted and bolted joint. There are many improvements …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 42–50 Read article
-
CFD Analysis of Savonius VAWT for Household Application
Abstract: Fossil fuels are depleting at very fast rate and will have shortages in near future. Also, prices of fuelsincrease day-by-day, demands of renewable energy sources increases for electrical power generation.Wind energy is available in nature free of cost and in abundant form, so is an excellent option forgeneration of electric power through wind turbine technology. Rapid increase in global energyrequirement resulted in considerable attention towards renewable energy sources as there …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 18–32 Read article
-
Assessing the Poisson Ratio of Reinforced Earth under Static and Dynamic Stresses
Abstract: Poisson’s ratio is an essential property of the soil strength and it is a measure of the amount of lateral strain in the soil sample caused due to the longitudinal strain of the soil. An attempt has been made in the present work to detect the variation in the Poisson ratio for reinforced and asphalt stabilized soil when tested under static and dynamic compressive stresses. Soil embankment model was prepared …
Published in Journal of Geotechnical Engineering · Vol. 10, Issue 1, 2023 · pp. 50–56 Read article
-
Principles and Use of Analytical Transmission Electron Microscope
Abstract: At the beginning of the review the analytical Transmission Electron Microscope is introduced. Equipment, imaging, diffraction and use of analytical TEM are described. Electron path under magnetic lens is delineated, emphasizing the lens aberrations, diffraction, astigmatism and gun brightness. Selected area electron diffraction patterns of Al-Cu and Inconel super alloy are used to index crystallographic planes and to derive zone direction while basic sources of diffraction contrast are depicted using …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 27–49 Read article